Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Treble action design help  (Read 6065 times)

0 Members and 1 Guest are viewing this topic.

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #20 on: May 05, 2011, 10:33:50 AM »

That's brilliant. Thank you both very much!

I think the secret is that reaming holes just right by feel in two thin strips like this is a very different operation to reaming a 6mm bush to within 0.01mm. The first is something I'd do by hand with a tapered 5 sided hand broach (clockmaking technology) - the latter with a lathe and machine reamer (engineering technology).

Now I feel equipped to do battle with the metal again - off to the workshop.

Thanks again.

Chris.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Treble action design help
« Reply #21 on: May 05, 2011, 10:48:22 AM »

The way Emmanuel Pariselle reams the holes is using a short length of axle rod in the chuck of a hand held electric grinder! It works, but might be a method that would offend a clockmaker!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #22 on: May 05, 2011, 10:56:51 AM »

Ah - the secrets of the melodeon makers course - if only I could have got a place. <sigh>

I'm trying to go it alone as a consequence of having missed out for July. Hence all the stupid questions!

In fact the technique you describe probably works well as it will serve to work harden the inside of the hole into the bargain. Normally for clock bushes you use the aforementioned broach, then finish off with a smooth broach with a slightly roughened surface to harden the brass. Not so different really.

Cheers, Chris.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Treble action design help
« Reply #23 on: May 05, 2011, 10:58:05 AM »

Which reminds me I think (not quite sure) that he roughened the surface of the rod before using it to ream the holes.

And the same method is effective for reaming the axle holes in wooden levers if you go for that type of construction.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #24 on: May 05, 2011, 11:00:52 AM »

Cool - I was wondering about that. Thanks again!
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Treble action design help
« Reply #25 on: May 05, 2011, 01:24:32 PM »

Wood levers is the only ones I have experience with, and I use 3/32" (2.3813mm) stainless steel axle, then a #41 drill bit (2.4384mm) for the axle hole in the lever.  This may not work well for metal to metal, but for wood, it seems to allow good movement without slop, and so far I haven't had problems with humidity.

Theo thanks for the FB photo story.  I liked the enlarged stop rod fix, superglue is a versatile substance besides for sticking my fingers together.

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #26 on: May 05, 2011, 01:45:41 PM »

Thank blafleur

That's quite a bit more clearance than I was expecting. I am finding 0.03mm excessive on a 6mm brass collet. As you say I expect the wood expands after the hole is drilled. Also on a 1 row box your lever is probably nearer 20mm wide?

Cheers, Chris.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Treble action design help
« Reply #27 on: August 01, 2011, 08:47:35 PM »

Hi Chris,

Any progress on the keyboard and mechanism? I'm about to start work on my own keyboard and am hoping you can tell us how you did. Photos of the finished keyboard would be wonderful.

Thanks,

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Treble action design help
« Reply #28 on: August 02, 2011, 12:52:23 AM »

Hello again

On Your suggestion, I have scoured all the makers sites  I can find for pictures including
- Loffet
- Gaillard
- Serafini
- Van DerAA
- Bergflodt
- Luukinen
- Gaubert
- Pariselle (2.5 row making course photos)

Whilst there's lots of good stuff, on none of these can I find a picture of the pivot part of the treble mechanism (where the aluminium rods hinge on the axle) on an Italian style covered fingerboard box (ie aluminium levers rather than wood). This is typically because it is hidden under the front part of the fingerboard. There are pics of the hohner style mechanism (most notably on Bernard Loffet's site), but no Italian ones.

Does anyone have a pic of this part they could send me? Or even a detailed description of how it's set up.
Does someone like Carini sell these parts (they don't list them on their site)? From the similarlities it looks like several makers are using a bought-in mechanism and adapting it.

Thanks, Chris.






Carini does sell these parts, and the leavers come in 3 different sizes, and they come with the brass plate bush already riveted to them you can then buy the mounting plates rods and spacers needed. But when I ordered them to get my order right I had to send photos with exact details to what i wanted. I was even able to get the leavers without bushes so they could be mounted the way that i wanted them. Someone told me that you should ask Carini for Galman rods as they have the finest tolerances.
Peter
« Last Edit: August 02, 2011, 03:01:58 PM by Peter Stormy Hyde »
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Treble action design help
« Reply #29 on: August 02, 2011, 08:01:42 AM »

Carini will also provide the necessary broaches, they are as necessary as they are expensive. When using the very common 3mm rod (which in fact can be anything from 2.96 to 3.00, most often 2.98) you'd need the 2.97 and 2.98 broach. But bear in mind, that even when using broaches you will still have to use a specially adapted rod for the final touch. The task is quite delicate, actually. The brass, or whatever alloy the bushes are made from, sticks easily to the steel rod and must be removed continuously with very fine sandpaper or steel wool. As to using grease or oil while doing this, opinions differ. I only start using grease during the final assembly.
« Last Edit: August 02, 2011, 08:04:48 AM by diatonix »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Treble action design help
« Reply #30 on: August 08, 2011, 11:19:32 PM »

What is a broach? ???
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Treble action design help
« Reply #31 on: August 08, 2011, 11:39:23 PM »

What is a broach? ???

I have to be very careful describing this to an engineering under-grad  :o As I understand it broaching is the process of drilling to slightly undersize, applying heat and forcing a hardened piece of steel machined to very close tolerances to create a very tight fit. There again there are devices called 'broaching drills' that are best described as magnetically attached milling machines that bore precise holes in steel plate.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Treble action design help
« Reply #32 on: August 09, 2011, 06:28:30 AM »

What is a broach? ???

I have to be very careful describing this to an engineering under-grad  :o As I understand it broaching is the process of drilling to slightly undersize, applying heat and forcing a hardened piece of steel machined to very close tolerances to create a very tight fit. There again there are devices called 'broaching drills' that are best described as magnetically attached milling machines that bore precise holes in steel plate.

I think this link might help with the tools.
http://www.hoj.com.au/images/catalogue/983dfbf27e2a9569bf3d1a578503168c.jpg
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Treble action design help
« Reply #33 on: August 09, 2011, 09:00:17 AM »

What is a broach? ???

I have to be very careful describing this to an engineering under-grad  :o As I understand it broaching is the process of drilling to slightly undersize, applying heat and forcing a hardened piece of steel machined to very close tolerances to create a very tight fit. There again there are devices called 'broaching drills' that are best described as magnetically attached milling machines that bore precise holes in steel plate.

Ah, thank you (:) And no need to be careful, a normal Engineering student might know that, but I go to Cambridge, where we aren't taught things of that ilk :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Treble action design help
« Reply #34 on: August 09, 2011, 01:14:13 PM »

a normal Engineering student might know that, but I go to Cambridge, where we aren't taught things of that ilk :P

An acquaintance of mine who was a natural sciences (including physics) graduate from Trinity Hall used to delight in calling himself a "quantum mechanic".

Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Treble action design help
« Reply #35 on: August 09, 2011, 01:44:07 PM »

Ah, those were the days - visiting my brother at Trinity!  The bar staff would clear the tables immediately before calling time so that there was plenty of room to set up a few rounds.  "Last one out drop the latch, guys!"

Rob.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal