Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pokerwork - adding internal pickups  (Read 1669 times)

0 Members and 1 Guest are viewing this topic.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Pokerwork - adding internal pickups
« on: April 30, 2011, 07:56:47 PM »

I'm planning to dis-assemble a microvox310 that I have and "mount" the gear inside my re-furbished pokerwork.  I can see that the 310 has 3 pickups  - which side (inside or outside) of the read pan should they go? I am thinking the outside.

Also I am keen to avoid the problem of the G and D rows sounding different (or more different than they sound already), by mounting the pickups symmettrically around with respect to the read blocks.  Does this make sense? Any thoughts?
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Pokerwork - adding internal pickups
« Reply #1 on: April 30, 2011, 08:14:11 PM »

Outside. The Microvox is designed to stick on to external velcro pads and to be easily removable, so I don't understand how you think you could mount it internally - and you'd have the problem of getting the wires to the outside of the box.

In any case, the sound inside the bellows is very weird. I did once have a mic capsule form a 1960's Grundig tape recorder that I used as an internal mic, and that worked quite well, but after that broke nothing else I tried was better than abysmal.

Before committing yourself too far with this project, make sure your mics don't overload. The capsules used in the 310 have a lower overload margin that those in the 405/410/420 series, and I have got distortion from a Pokerwork with a Microvox mic on it. You can soon tell if you try playing a chord loud.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Pokerwork - adding internal pickups
« Reply #2 on: May 02, 2011, 12:20:24 PM »

I agree that you may well find the mics are too close and will give a distorted sound.  not too difficult to experiment before commiting yourself, though.

The original package is designed to be velcroed to the outside of the grille and the internal mounting will be on the inside of the grille, so not that different.  I had a Dino Baffetti Morris II (aka Saltarelle Berry) with mics masticed to the grille cloth and one in the bass cabinet.  The connecting wire ran through the bellows in aserpentine fashion, glued vertically to each fold.  The battery was mounted in the treble end, behind the grille and a volume pot in the grille.  Plugging in the lead under the fingerboard switched everything on (clever wiring of a stereo socket).  It worked very well, but like any microvox style system has a slightly boxy sound with emphasised bass tone - a property of close micing with a condenser capsule.

I find mics and stands around a foot from the box give a much better sound, but there's no denying the convenience of a built in system, esecially as you can join in a scratch band without carrying anything extra other than a lead.

Rob.
« Last Edit: May 02, 2011, 12:41:43 PM by Rob2Hook »
Logged

2rightfeet

  • Good talker
  • **
  • Offline Offline
  • Posts: 76
Re: Pokerwork - adding internal pickups
« Reply #3 on: May 02, 2011, 05:05:43 PM »

More years ago than I care to count, I did actually do just this on a pokerwork. I had paid to have my other box (Paolo Soprani) fitted with internal mics, looked at them and decided that the arrangement was so simple I would copy it on the pokerwork. It worked fairly well for barn dance playing, but the sound quality wasn't of the highest.
I got couple of cheap microphone inserts; these were mounted in aluminium rings with tabs to hold the mic in place and longer tags for mounting. These tags were bent then screwed onto the inside of the reed blocks, one screw on each row so they sat above the middle of the rows, one near the bass end and one near the treble.
This is all a long way back, so my recollection may not be exact, but I think that the mic mounting tabs were made long enough to allow the mics to be mounted about half an inch away from the woodwork of the reed blocks, and there was no mic on the bass end - the mic inserts were omnidirectional and perched inside the bellows so they just picked up the bass sound anyway.
The fact that the mics did not seem to overload during playing should be put down to good luck rather than judgement.
If I decided to do this again with modern kit, I would fish around for a supply of cheap mic inserts rather than ripping up a good external mic system. Then again, external mics are better these days, so I probably wouldn't bother.
Logged

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: Pokerwork - adding internal pickups
« Reply #4 on: May 03, 2011, 10:34:10 PM »

Thanks for these useful thoughts, as I haven't "found" the Microvox 310 yet (I think I know where it is - but not at home), I haven't had a chance to look inside and consider the options.

Once I've had some more thoughts I'll post here again. Other comments still welcome though!
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal