Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: PA mics  (Read 4579 times)

0 Members and 1 Guest are viewing this topic.

Sandy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1007
  • 'Musical Landlady'
PA mics
« on: May 09, 2011, 09:17:48 AM »

Sorry this has probably been covered before but can anyone recommend a fair quality mic to have on a stand to pick up my treble for a PA system. At the moment I use a couple of beyerdynamic clip on mics which is fine for the bass side (I think) but the treble one is almost too sensitive and picks up the button noise. I don't particularly like being attached to wires anyway so maybe I'll think about two mics on stands instead. I can't justify big money as it's for the odd gig now and then but will try and get the best I can afford.

This is starting to feel like deja vu...maybe I have asked this before  :|bl
hopefully someone can still point me in the right direction.

Cheers

Sandy
 (:)

not sure this should be under recordings and videos. ::)
« Last Edit: May 09, 2011, 09:51:45 AM by Sandy »
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: PA mics
« Reply #1 on: May 09, 2011, 09:54:53 AM »

I've recently got myself a AKG C1000s to use on the treble end. It's a good solid microphone with a very good response (or whatever it's called properly) and all that kind of thing. It needs phantom power from the desk (pretty much ubiquitous these days), or you stick a PP3 batter inside it.

It has a little plastic attachment that you can add to the microphone capsule to turn it from cardidoid to hypercardidoid. This is very good for rejecting other sounds on-stage.

From what I've heard of it, I like it.

I've started also using a Beyerdynamic Opus 62 clip-on on the left hand end. It picks up more handling noise than I really like but it's at a more acceptable level than when it's clipped to the treble end. Then again there isn't really a place to securely clip it to the treble end anyway.

I previously used a couple of Shure SM57s which worked well, but "went missing" at a festival gig.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: PA mics
« Reply #2 on: May 09, 2011, 09:55:57 AM »

I also use and like the AKG C1000S, they are tried and tested, sensitive enough that they don't have to be ultra close, and have a hypercardiod adapter which can be fitted inside to make them very directional and reduce to chance of feedback on a noisy stage.  It is a condenser mic so requires a power supply which can be either phantom power from your mixer, or a pp9  batttery fitted inside the mic.  You should be able to get a new one for around £100.  If buying secondhand make sure it comes with its clip because it won't fit on a standard mic stand clip.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ken Watson

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: PA mics
« Reply #3 on: May 09, 2011, 11:12:34 AM »

Hi Sandy,
I also use an AKG C1000s for the treble side.

Note: You can also buy them in "matched pairs" so you can use them for stereo recording as studio mics.
« Last Edit: May 09, 2011, 11:14:23 AM by Ken Watson »
Logged

ianstephenson

  • Member
  • *
  • Offline Offline
  • Posts: 14
  • Beltuna Alex 3 D/G, Cairdin C#/D & B/C
    • ianstephenson.me
Re: PA mics
« Reply #4 on: May 09, 2011, 11:54:24 AM »

Hi Sandy,

The C1000s are pretty good,  although some find them a little bright or "gritty". 
Hypercardiod pattern (it picks up from a smaller area right in front of the mic) is good for box RH providing the mic is at least 6 inches away from the grill.

I don't think you'll easily get enough bass from your LH with a mic on a stand -the problem is not only the distance changing (and as a result the volume changing too) from mic to LH, but also as theo rightly says, a hypercardiod pattern which is fairly necessary to avoid feedback also means that the high frequencies (bite, clarity, fizz) tail off very quickly the further you move from the centre of the mic's "sight".  The low frequencies (feet tapping on the stage, other instruments like guitars, bassy sounds coming from the backs of the PA speakers) do not tail off at the sides of the mic, which means they get picked up pretty strongly.

Distance is your friend!  Thanks to the inverse-square law,  every little bit closer your mic can be to the sound source the better.
In short, use your clip on mic for your bass-end!  It sounds better, looks better, doesn't pick up other instruments or noise and can be more easily EQd without problems!


as for a RH mic recommendation,  there are several SHURE mics that you should audition in a PA shop (every music shop with a PA section will have these in stock, they last forever, good value, good resale value if you decide to get rid later).

Try these SHURE mics:  SM57,  SM Beta 57, SM58LC.  All around the £100 mark, a bit cheaper second hand.
They have different characteristics of sound so try them out if you can.  I use an SM Beta 57, but some people don't like how "fizzy" it sounds.  I would also recommend RODE NT5 if you like a sharper more hifi sound, and I've also heard good things about OKTAVA mics for this purpose although I haven't tried one personally.

If these options are all more than you're looking to pay,  you should check out T-Bone mics from Thomann.de,  very cheap,  the EM700 ones do the job pretty well, although they're cardiod pattern so you should try to keep your RH around 6-12 inches away to avoid feedback problems.  Only £25!
http://www.thomann.de/gb/the_tbone_em700.htm

My future father-in-law uses these to mic whole sections of his large ceilidh band and he's very pleased with them.

Hope that helps,


Ian

Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: PA mics
« Reply #5 on: May 09, 2011, 12:03:57 PM »

Quote
In short, use your clip on mic for your bass-end!  It sounds better, ...

Hmm, without re-entering past discussions, are you absolutely sure about that?
Logged

Sandy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1007
  • 'Musical Landlady'
Re: PA mics
« Reply #6 on: May 09, 2011, 11:26:54 PM »

Thanks all for the great info. I shall certainly start by looking at a mic for the treble and think my 'opus 62' is acceptable for the bass at the moment.

cheers,

Sandy
 (:)

MandoC

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 266
    • Swing Dogs Contra Dance Band
Re: PA mics
« Reply #7 on: May 10, 2011, 04:35:06 AM »

Sandy:  I echo what others have said about the C1000s. i have three AKG C1000S mics that I use for our band, The Swing Dogs: fiddle, flute and whistle, mandolin and accordion respectively. I think they are great mics for almost any acoustic instrument. They can run on a 9V battery or phantom power. I am glad to see I am in good company with others on this forum.  All the best  Charlie
Logged
Charlie Hunt
Mandolins and now, B/C Button Accordion)

Swing Dogs Contra Dance Band, Facebook Page:https://www.facebook.com/SwingDogs

robriki

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 110
  • Saltarelle AD Nuage, Hohner CG Erica
Re: PA mics
« Reply #8 on: May 10, 2011, 06:26:40 AM »

and I've also heard good things about OKTAVA mics for this purpose although I haven't tried one personally.

I have a pair of Oktava MK12, i've used it on stage a few times, but mainly in recording situation.  I was very satisfied with them, however they sound very crispy, which means more button noises, etc.  Unless you have the time to do a good eq and a sound test, you could end up with a feedback choir...  On stage, i would definitively recommend hypercardioid pattern, if you're to go with a condenser mic, or to go with a good dynamic.  Especially if you're to play in places where they don't have sound man.

The only time I saw sound men use two condensers on one accordion was in solo concert.  If you're playing dance music, it's mostly to be in a noisy, crowdy situation.  Condenser mics will amplify the problem in such a situation, as they will pick up the sound of the place as much as the sound of your accordion. 

For left hand, if you're using your clip mic, try to place it so that the air coming out doesn't blow directly in.  I clip the beltpack on my left strap with just enough wire to go to the lenght of my harm, so the XLR stays behind me.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: PA mics
« Reply #9 on: May 10, 2011, 08:47:44 AM »

The only time I saw sound men use two condensers on one accordion was in solo concert.  If you're playing dance music, it's mostly to be in a noisy, crowdy situation.  Condenser mics will amplify the problem in such a situation, as they will pick up the sound of the place as much as the sound of your accordion.

The AKG C516 clip-on gooseneck mics used by many box players are condensers, and I don't think they have background noise/feedback problems. Condensers are blamed for poor feedback or background noise because they are more often used for concert setups and for best concert sound quality you need the mic further away from the instrument. If you put a condenser the same distance away from the instrument as a dynamic the noise rejection will be the same, assuming both mics have the same directional response.

In a band, I use SM57 on treble side and Microvox on the bass.

For amplified concerts using our own PA (rare), I use a pair of Behringer C-2 which do for melodeons, concertina and cello.
I recommend trying these before AKG C1000s unless you don't have have phantom power so really need the battery option.

Most amplified concerts we do are festivals where there is a sound system provided, and you have to use whatever they provide. If you're lucky you get good condensers, often they can do well with SM57s on instruments, sometimes you get nothing but SM58s  :(
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: PA mics
« Reply #10 on: May 10, 2011, 10:03:41 AM »

It seems to me that the system you would use will depend on the circumstances of the performance.  If you are in small acoustic band, in a quiet concert hall with good acoustics, you can get away with being pretty relaxed about how directional your mikes are, and quality of sound becomes the overriding requirement.  If on the other hand (like many of us I suspect) you are in a large band with lots of stage mikes in a high roofed hall with awful acoustics and a noisy high-spirited bunch of dancers, perhaps with a full drum kit on stage, having a suitable system so that you can hear what you and the significant others are playing is absolutely essential if you are going to enjoy the experience!  That means you will probably need fairly directional mikes, directed at each end of the box, some sort of resonant frequency control, and high quality foldback amps/speakers.  It will also help if you can reduce unnecessary stage sound by avoiding backline amps, and considering very carefully where to locate your drummer, if you have one.

At least a button box tends to make a punchy noise, and is relatively compact.  It's the big piano accordion players I feel sorry for, because if they have the usual small condenser close miking systems in such a situation it's quite likely in my experience that they will be virtually unable to hear themselves without feedback problems.

So many bands fall out with each other simply because each member is frustrated at not being able to hear themselves at noisy gigs, and nobody can work out what to do about it!  How many times after a gig have you heard your chums use those trusty words:  'It was hopeless, I just couldn't hear you, and I could hardly hear myself!'

Controversial maybe, but having the on-stage sound sorted is actually more important than the Front of House sound, IMO.
Logged

Howard Mitchell

  • Guest
Re: PA mics
« Reply #11 on: May 10, 2011, 10:08:59 AM »

Once again I'm with Anahata on this one.
The C1000S and C2 have different responses between 2kHz and 10kHz with the C1000 having two peaks and a dip between them at 7kHz. The C2 rises slowly between 4 and 10kHz and then drops back rapidly to 0db.  Many characterise this as the C1000s being more brittle or harsh.  Studio users rarely ask for the C1000s, they more often get used as drum overheads in live events.

Howard  
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: PA mics
« Reply #12 on: May 10, 2011, 10:44:49 AM »

Quote
assuming both mics have the same directional response.

This is my main doubt, Anahata - do they, in fact?  And how easy do you find it to keep the clip-on mike pointing away from an on-stage monitor, compared with the 135-180 degrees away that you achieve with a pair of free-standing mikes?
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: PA mics
« Reply #13 on: May 10, 2011, 11:47:48 AM »

Quote
assuming both mics have the same directional response.

This is my main doubt, Anahata - do they, in fact?

I mentioned that to rule out the mistake of comparing an omnidirectional with a cardioid.
No, all mics are different, especially when you look at off axis frequency reponse, but there's no generic rule that says that dynamics are more directional than condensers. Of course both mic technologies are available in all directional patterns from omnidirectional to figure-of-8.

Quote
And how easy do you find it to keep the clip-on mike pointing away from an on-stage monitor, compared with the 135-180 degrees away that you achieve with a pair of free-standing mikes?

I wasn't particularly recommending clip on mics, just trying to use them as an example to bust the myth that condensers "pick up everything" because they are condensers. And yes, a carefully positioned mic on a stand can reject a lot of monitor sound.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: PA mics
« Reply #14 on: May 10, 2011, 12:55:40 PM »

Ah, thanks for that response, that's what I was thinking you had in mind.  In fact, don't 'cardioids' actually have quite a range of polar patterns?  I've been doing some informal experiments with my Samson Q1 condenser mikes, and looking at the polar diagrams in the manuals for the various mikes suggested, and a few things have struck me initially as a result:

The proximity effect is going to be considerable, with a clip-on system.  If you listen to the bass end of a box near to its front face, it is quite natural sound, but if you listen to it from a point near to the sound holes in the end, the bass comes across much more strongly.  This may have two advantages - the player may like the strong bass sound, and a strong signal is good in terms of allowing one to cut background noise, and thus reduce the potential feedback problem.  However the disadvantages may be that you need to equalise the signal to make it more natural, and also the proximity effect drops off quickly with distance, so the individual bass reeds are likely to produce different volumes.  Also, feedback at the higher frequencies from the left hand end will still be a potential problem, if the mike isn't sufficiently directional.

The next thing is that the off-axis response seems to vary quite considerably with different frequencies and angles - many of the polar patterns look quite 'lumpy', as it were.  For both the C2 and the C1000, you often get attenuation compared with the direct straight-on signal of only -10dB to -15dB, sometimes even with the 'PPC' shield (at 8kHz, only -8dB, I notice).  With my Q1 mikes, it looks at first sight as if I'm getting -20dB over most of the frequency range for the angles I'm using with a fixed X-Y LH end mike.  -10dB could result in feedback at certain frequencies, and if one is moving about, it could come and go - a problem for the sound engineer.  I do not know if there are  other up to date mikes available that give an even off-axis attenuation effect, but it does seem to me to be that should be an important consideration in choosing one.

By contrast, if you have a suitable fixed mike positioned such that the bass end is always within the usable 'cone', turned away from the monitor at 135 degrees, and with a polar attenuation at this angle of -20dB over the frequency range, you should be able to get a natural sound with minimised feedback, I would have thought, and this is perhaps why my system seems to work in practice.

But I have to say that I'm really no expert, and I defer to others - this is just what seems to me to come out of the specifications.



Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: PA mics
« Reply #15 on: May 10, 2011, 01:58:52 PM »

I do not know if there are  other up to date mikes available that give an even off-axis attenuation effect, but it does seem to me to be that should be an important consideration in choosing one.

It is one of the major and little known reasons why two mics with the same published and commendably flat-looking on-axis response may sound different. The desirability of a reasonably flat off axis response and the difficulty of achieving it are one reason why people pay £800 for a mic whose published on-axis response doesn't look all that different from an £80 mic.

Quote
But I have to say that I'm really no expert, and I defer to others - this is just what seems to me to come out of the specifications.

10/10 for reading the specs, and in some cases for for finding the specs. as polar response plots are rarely published because they don't tend to look good.
BTW I don't claim to be an expert either, but I have spent a lot of time reading about this stuff because it's interesting.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: PA mics
« Reply #16 on: May 10, 2011, 02:52:53 PM »

Oh, festivals and venues. I always take my mics whatever is said beforehand and whatever tech specs we send. We don't play many folkie venues or festivals so it's not unusual for the sound person to ask me where the sound comes from when setting up stands. Also, they seem to know cellos, fiddles, saxophones, drums etc ... but when it comes to me they just say something along the lines of "that thing" and wave their arm generally in my direction. Fills you with confidence that does  ::)

I once had a sound guy pull down a strange looking overhead mic from a drumkit, point it towards me and ask whether that would be OK. I simply said that I had no idea, it was his microphone after all!

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: PA mics
« Reply #17 on: May 11, 2011, 10:13:39 AM »

Perhaps the more experienced could advise me . . .

Is there any problem plugging dynamic mics into a mixer with +48v phantom power switched ON? Our group has 2 x AKG C1000S condensers and several dynamic mics. I use the batteries in the C1000S and phantom power OFF, in case there would be a problem for the dynamic mics (Behringer 1800). Is this an unnecessary precaution?
Logged

Howard Mitchell

  • Guest
Re: PA mics
« Reply #18 on: May 11, 2011, 10:55:54 AM »

Perhaps the more experienced could advise me . . .

Is there any problem plugging dynamic mics into a mixer with +48v phantom power switched ON? Our group has 2 x AKG C1000S condensers and several dynamic mics. I use the batteries in the C1000S and phantom power OFF, in case there would be a problem for the dynamic mics (Behringer 1800). Is this an unnecessary precaution?

So long as the dynamic mic cables are correctly wired with the screen to pin 1 and the balanced pair to 2 and 3 there will be no problem.
The phantom power is presented equally to pin 2 and 3 so no current flows through the microphone.  It's advisable to plug the microphones in and then, with the main fader down, switch the phantom on to avoid and pops.
I do this regularly with a mixer which has global phantom power using phantom powered DIs and normal dynamic mics.

Howard
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: PA mics
« Reply #19 on: May 11, 2011, 11:11:52 AM »

As long as someone hasn't been doing a spot of microphone rewiring or soldered up their own cables wrongly there'll be no problem.

Behringer will have made those microphones to be used in a system with phantom power (I'm pretty certain we've got a couple of those lurking around in one of the band's cable buckets). Many situations will have a mixture of dynamic mics and condenser mics needing phantom power, plugged into the same system with no deleterious effects.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal