Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: PA mics  (Read 4554 times)

0 Members and 1 Guest are viewing this topic.

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: PA mics
« Reply #20 on: May 11, 2011, 11:32:42 AM »

Thanks,chaps.
My own mic cables are OK. I'd better check the club's ones, but as they're all commercial cables I should be able to assume they're OK (but as we know, "assume" can make an ass of U and me!).
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: PA mics
« Reply #21 on: May 11, 2011, 11:49:08 AM »

I'd better check the club's ones, but as they're all commercial cables I should be able to assume they're OK (but as we know, "assume" can make an ass of U and me!).

The fiddler in our band gave me a broken XLR-XLR cable to fix and when I took it apart I found it was a single core with (I think) shield wired to pins 1 and 3 and hot to 2. Tactful questioning about what clown had wired it up revealed it was bought from a local music shop. Most condenser mics would have failed to work with it, and phantom power would have injected about 10mA of current into a dynamic mic, which probably wouldn't damage it but would make a hell of a bang if you plugged it in live.

As it happens, it had been working (before it broke) because it was used on a SM57, but I replaced it with a proper cable and kept the other one for a jack-jack cable.

I'd have thought as purchased it was hardly legal under the trades descriptions act.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: PA mics
« Reply #22 on: May 11, 2011, 12:10:40 PM »

Hmm, phantom power ... pity it only ever goes up to 48 volts. We were playing outdoors the other day and a band member kept crunching all over my cables with his hard soled boots (did some noticeable damage to them  >:(  ). A nice electric shock up the leg would have driven my point home  >:E

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: PA mics
« Reply #23 on: May 11, 2011, 12:20:47 PM »

And while we're on the heavily drifting subject of dodgy leads, I've had trouble for several years with a very loud occasional noise, which seemed to come from main mixer amp, one of the powered monitors or the bass amp, indiscriminately.  I always suspected dodgy stage power supplies.  Last week I found the real culprit - a regularly PAT tested kettle lead where the live cable had never actually been screwed into the mains plug pin!  My annoyance at such slapdash manufacture and PAT testing was however tempered with relief at realising that none of my amps had any problems after all, and that there had never been a more serious short!
Logged

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: PA mics
« Reply #24 on: May 11, 2011, 12:50:02 PM »

Still drifting heavily, but hopefully usefully, we had a case of occasional, random booming through the PA, which we finally pinned down to coming from a powered speaker - a dry joint in its electronics reacting to vibrations in the floor.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal