Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Air leak help  (Read 1348 times)

0 Members and 1 Guest are viewing this topic.

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Air leak help
« on: May 10, 2011, 10:20:53 AM »

Hello all

I just got my reed blocks back from having had some note changes. Reassembled box with much anticipation only to find it leaks like a sieve.

I've checked for leaks as per various hints on this forum (cheeks, eyes), which works really well.

Unfortunately the result of this is that a significant proportion of the top row treble pallets seem to be leaking.

The instrument was working perfectly before I sent the reed blocks away. It's been in bits for about 3 weeks. The treble end has not been touched. Is it possible that the sound board/plate/fondo thingy could have warped in that time? Can overtightening the reed block attachments distort the plate? Any other suggestions?

It's a Loffet G&B by the way, if that makes a difference. The plate is wood (ply). It's less than 2 yrs old.

Thanks, Chris.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Air leak help
« Reply #1 on: May 10, 2011, 12:24:09 PM »

I would say that over tightening the reed block attachments could possibly deform the plate.  If you take the blocks off does it still leak at the pallets?  Plywood is a lot less likely to spontaneously warp than solid wood but I guess that is also a possibility.
Logged

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Air leak help (Fixed!)
« Reply #2 on: May 10, 2011, 05:21:34 PM »

Success!

Tried as you suggested and the leak vanished. Thanks waltzman.

Have subsequently re-fitted the reed blocks with judicious tightnening of screws and it's back to its old form.

Phew!

I suspect the problem lay in the brace bars across the tops of the reed blocks. These were quite tight and were probably pulling the two main blocks together slightly thus twisting the plate/fondo thingy (what IS that thing called??!?) via the securing brackets. I was pretty sure these were done up tight when I took them off, which is why I re-did them the same, but maybe I was mistaken.

Back to practicing again. And fun with my new buttons (how sad is that).

Thanks, Chris.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal