Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Best thing for sticking valves!  (Read 2626 times)

0 Members and 1 Guest are viewing this topic.

HallelujahAl

  • Guest
Best thing for sticking valves!
« on: May 14, 2011, 09:46:16 PM »

Well, here's a shocking discovery that I've made today...whilst tuning the old Trichord...the very best glue imho for sticking new valves onto reedplates is a bottle of my good lady's nail polish! Does a fantastic job, and a little goes a long way as well...less is more I found...and they kindly supply a neat little applicator brush to apply it with...and it's cheap...well, really cheap if you 'borrow' it from the missus  ;D

Just thought I'd share that little gem.
AL
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Best thing for sticking valves!
« Reply #1 on: May 14, 2011, 10:17:56 PM »

What shade? :D

HallelujahAl

  • Guest
Re: Best thing for sticking valves!
« Reply #2 on: May 14, 2011, 10:40:47 PM »

Clear of course! Anything else would be too vulgar I'm sure  ;D
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Best thing for sticking valves!
« Reply #3 on: May 15, 2011, 12:49:49 AM »

Interesting. I think I'll hold off until I hear how durable it is... how long it will last before they fall off :P If it does work then that's another unlikely thing that you can use for box repair!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

HallelujahAl

  • Guest
Re: Best thing for sticking valves!
« Reply #4 on: May 15, 2011, 06:18:02 AM »

Well I heard about it from my pals over at a Chromatic Harmonica forum, there's one guy there who won't use anything else. And I think that windsaver valves on a chromatic harmonica probably take more bashing than those on a melodeon - especially given the fact that they get spit and moisture on them all the time, as well as the pressure they get put under from our lungs. I popped a small blob of nail polish on the end of the valve (the plastic type) and popped the valve onto the reedplate. Within a matter of just a few minutes it had fixed nicely so that I was able to flick the valve with the end of my craft knife. So I'm hoping that I get good service from them. I'm still working on the box so will be keeping an eye on them naturally - but I've got a good feeling about the nail polish. I'll keep you posted  ;D
AL
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Best thing for sticking valves!
« Reply #5 on: May 15, 2011, 07:44:28 AM »

Many years ago, a rather crucial piece of cork fell off my clarinet just before a concert. Those of you who play wind instruments will know what I mean; a small sliver of cork which acts as a buffer between two pieces of metal keywork. Apart from keeping the action silent, it also has to be just the right thickness to ensure the pads which the keys control close on the toneholes exactly together.

There I was, in the green room 15 minutes before concert, having retrieved the piece of cork but having no glue to reaffix it. Nice pretty girl steps up with bottle of nail varnish from handbag and says 'will this do?' One quick blob and a couple of minutes later the cork was fixed as good as ever. Just the job.

I forget which colour it was though.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Best thing for sticking valves!
« Reply #6 on: May 15, 2011, 08:59:38 AM »

Just don't use nail varnish remover on anything important as acetone can eat through various plastics very quickly! There are some horrible pictures on the net of a melted club II which suffered this fate!
Logged

HallelujahAl

  • Guest
Re: Best thing for sticking valves!
« Reply #7 on: May 15, 2011, 10:12:27 AM »

Quote
Just don't use nail varnish remover on anything important
Amen - please ensure that it's nail polish and NOT nail polish remover  ;D
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Best thing for sticking valves!
« Reply #8 on: May 15, 2011, 10:25:28 AM »

Quote
Just don't use nail varnish remover on anything important
Amen - please ensure that it's nail polish and NOT nail polish remover  ;D

Nail polish/varnish also contains acetone, so keep it away from celluloid.   The main constituents of nail varnish are cellulose acetate (aka celluloid) dissolved in acetone. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Best thing for sticking valves!
« Reply #9 on: May 15, 2011, 11:53:28 AM »

Aye, but there isn't generally any celluloid on reed plates... and if it melts the valve then maybe it'll stick better. :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Best thing for sticking valves!
« Reply #10 on: May 15, 2011, 12:14:37 PM »

Of course,  its just to avoid accidentally getting the outside of the instrument marked.   Not a big risk I agree, but better to be safe.

Also... some plastic valve materials can react to solvents in glue.   I had a batch of valves where the material was affected by a solvent based adhesive, which was not nail varnish.  It was a delayed effect, valves went on nicely, but a few hours later they would start to distort slightly and no longer would lie flat.  So if trying any new adhesive for the first time, leave the valve adhesive to cure for a while before waxing the reeds in place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Best thing for sticking valves!
« Reply #11 on: May 15, 2011, 05:32:03 PM »

I've been using it for years on screws (old gunsmith trick), and have used it on leather valves, but wondered how it did on plastic ones.  The little brush makes it very handy to apply, and I always find a way to knock it over using it one handed.

HallelujahAl

  • Guest
Re: Best thing for sticking valves!
« Reply #12 on: May 15, 2011, 05:41:13 PM »

Funnily enough I'd been using a leather glue to apply the plastic valves previously - nothing wrong with it, it works fine, but it's not cheap and I prefer to keep my leather glue for when I make concertina bellows which is why I decided to try another glue for the plastic valves on the old trichord. It's 24hrs later and still seems ok - though I shall check it all out later tonight.
« Last Edit: May 15, 2011, 05:46:14 PM by HallelujahAl »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal