Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: TuneLab tuning software  (Read 11139 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
TuneLab tuning software
« on: May 19, 2011, 01:30:28 PM »

Recently the opportunity arose fror me to have an extended trial of an iPad.  Searching through the tuning apps turned up The TuneLab Piano tuner I wonder has anyone else here come across this?  It is very much designed for piano tuners, but they also do a version for pipe organs and even a tachometer for use with engines that uses similar sound analysis techniques.  Clearly the people behind these products are adaptable, and if they could turn their hand to a version optimised for free reeds it could be very good indeed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: TuneLab tuning software
« Reply #1 on: May 19, 2011, 01:54:01 PM »

Bit steeply priced at $299.99 though  :o

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: TuneLab tuning software
« Reply #2 on: May 19, 2011, 02:19:17 PM »

It's only a little more than the popular Dirk's Tuner which several people here have reported on. 

I can see potential to be very good value for money.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: TuneLab tuning software
« Reply #3 on: May 19, 2011, 03:00:27 PM »

It's only a little more than the popular Dirk's Tuner which several people here have reported on. 


Dirks is ~£87, TuneLab is ~£185

Quote
I can see potential to be very good value for money.


Possibly

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: TuneLab tuning software
« Reply #4 on: May 19, 2011, 03:15:46 PM »

If I could overcome my feelings about Dirk's ugly user interface I would want to use the additional "record and  report" module for another ~£45 which closes the gap a fair bit.

Of course it all depends on how much tuning your are doing.  For any job I do every day, or at least several time a week I don't mind investing in good tools that make it easier to get a top quality result.   

The one thing I though TuneLab might help with is finding the degree of tremolo that really makes one individual box sing.  I have a suspicion that this has some parallels with getting the best amount of stretch tuning in a piano by taking into account partials as well as fundamental frequency.  It would mean persuading the people behind TuneLab to produce a version tailored for box tuning.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: TuneLab tuning software
« Reply #5 on: May 19, 2011, 03:32:27 PM »

The TuneLab manual is fascinating reading. I am particularly interested in the piano tuners' concept of inharmonicity and octave stretching. Similarly to Theo, I suspect that when tuning melodeons, we ought to take into account the partials generated by the reeds and the way they interact with each other.

My limited experience so far with tuning reeds has shown me that even though an instrument can be tuned exactly to an electronic tuning device, it can nevertheless sound 'dead' or (good heavens) possibly flat as you go up the keyboard. I'm sure this is due to the interaction of the higher partials of the reeds and that, as with pianos, some sort of stretching of octaves is desirable. A highly experienced professional tuner will, I'm sure, do this by ear so that it sounds good.

I also think that the sound wet-tuned instruments mask this stretch/partials effect, so the tuning is perhaps less critical than with a dry-tuned box.

Finally, the spectrum of partials generated by a traditional concertina reed is different from melodeon/accordion reeds, and so the tuning methodology for a concertina is going to differ from a melodeon/accordion.

I have discussed all this with a friend of mine who is a piano tuner. He agrees that accordion reeds probably should be tuned with some stretch. However, the difference between pianos and free-reed instruments is that the former can be easily put right if you make a mistake during tuning, whereas tuning free-reeds always involves removal of metal from the reeds which cannot be put back, so you have less scope for experiment!   
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: TuneLab tuning software
« Reply #6 on: May 19, 2011, 03:45:25 PM »

I don't think that we necessarily need to be thinking about stretch tuning and inharmonicity in the same way as piano tuners because the way the sound is generated is completely different. in a piano the inharmonicity comes about because a piano wire is not a perfectly flexible string, and the stiffness of the steel wire has a larger effect at the fixing points.  If there is inharmonicity in free reed generated sounds then it must come about through a completely different mechanism, presumably related to the way the moving reed chops the air as it moves through its closed position aligned with the surface of the reedplate.  But an tuner that can measure the frequency and amplitude of the first few partials would be a useful tool for investigating what actually does happen.

I'm now in discussion with the developer of TuneLab. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: TuneLab tuning software
« Reply #7 on: May 19, 2011, 03:56:19 PM »

I don't think that we necessarily need to be thinking about stretch tuning and inharmonicity in the same way as piano tuners because the way the sound is generated is completely different. in a piano the inharmonicity comes about because a piano wire is not a perfectly flexible string, and the stiffness of the steel wire has a larger effect at the fixing points.  If there is inharmonicity in free reed generated sounds then it must come about through a completely different mechanism, presumably related to the way the moving reed chops the air as it moves through its closed position aligned with the surface of the reedplate. 
Do you think there are also partials generated (or at least modified) by the reed block and other components inside the instruments?

Quote
But a tuner that can measure the frequency and amplitude of the first few partials would be a useful tool for investigating what actually does happen.
That would be interesting.
Quote
I'm now in discussion with the developer of TuneLab. 
Excellent! Please keep us informed of any progress.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: TuneLab tuning software
« Reply #8 on: May 19, 2011, 04:01:32 PM »


Do you think there are also partials generated (or at least modified) by the reed block and other components inside the instruments?


Need an emoticon for a Gallic shrug with palms up "je ne sais pas"

Its going to relatively easy with something like TuneLab to measure the partials, much more involved to work out how they arise.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: TuneLab tuning software
« Reply #9 on: May 19, 2011, 05:44:50 PM »

Do you think there are also partials generated (or at least modified) by the reed block and other components inside the instruments?

I wouldn't expect anything that you could hear from more than about 50cm away.

The thing with pianos is that the movement of the string is translated directly into sound, so all the inharmonic partials are part of that sound. With free reeds the reed is chopping an airflow on and off at the fundamental frequency with a more or less square wave (the slot is either open or it's closed) so all the harmonics are pure multiples of the fundamental. I wouldn't expect internal vibrations of the reed at to contribute much, though in theory they could affect the timing of the exact point at which the reed cuts off and opens on each cycle.

I think there is more mileage in looking at so-called "Dedic" tuning if you're concerned about the finer points of "sounding in tune". Or of deciding what scale to tune to, as in equally tempered vs. meantone vs. Cajun etc.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: TuneLab tuning software
« Reply #10 on: May 19, 2011, 06:02:48 PM »

I wouldn't expect anything that you could hear from more than about 50cm away.

The thing with pianos is that the movement of the string is translated directly into sound, so all the inharmonic partials are part of that sound. With free reeds the reed is chopping an airflow on and off at the fundamental frequency with a more or less square wave (the slot is either open or it's closed) so all the harmonics are pure multiples of the fundamental. I wouldn't expect internal vibrations of the reed at to contribute much, though in theory they could affect the timing of the exact point at which the reed cuts off and opens on each cycle.

I'm not sure that's right. I've done some work on the normal modes of a clampled-free euler beam under free vibration (which is a reasonable approximation to a reed) and the harmonics are not regular. In fact you have to solve the governing equation graphically, as there is no analytical solution. I am not sure how the modes of such a beam translate to a reed beating in a slot under air pressure and spring force, but I'm guessing that you could treat it as a beam with an applied load on it, which would then give you the modes of vibration and the amplitudes (with the aid of a computer).

It isn't quite a square wave, the accordion reed gives a square wave with a dip at the higher peak and a spike and then a squiggle and the lower peak. The airflow is like a sine wave but with an extra peak part way along the descending slope, if you can envisage that. Rather like [2*sin(x)+1.5sin(2x-pi/4)]. This is due to the differing amounts of airflow on each side of the slot.

You are right though in that the sound of a stringed instrument is generated mainly by the vibration of the front, whereas for an accordion the sound is produced by the air flowing through the reed, like a siren. Whether this means (as some have said) that all vibration of the body and fondo is bad vibration I don't know. I also don't know how the reed block chambers work and how great an effect "tuning" them would have. I'll ask my supervisor next time I see him.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: TuneLab tuning software
« Reply #11 on: May 19, 2011, 11:37:31 PM »

Replying to both Ukebert and Anahata....

I understand what you are both saying. But if it were simply  matter of chopping the air flow into chunks as the reed vibrates in the reed plate slot, all the debate about machine-made reeds vs tipo a mano vs a mano would be meaningless, as each type would produce the same sound as another. Yet I think most people would agree there is a difference. Furthermore, for example, Hohner reeds sound different to Voci Armoniche which in turn sound different to Binci reeds, etc. This applies even when there is only a single reed sounding. And accordion-reeded concertinas sound different to traditionally-reeded concertinas.

Then there is the difference between the sounds of brass reeds vs steel reeds.

So there must be other factors going on which influence the quality of the sound produced.
« Last Edit: May 19, 2011, 11:52:41 PM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: TuneLab tuning software
« Reply #12 on: May 19, 2011, 11:51:13 PM »

I think there is more mileage in looking at so-called "Dedic" tuning if you're concerned about the finer points of "sounding in tune". Or of deciding what scale to tune to, as in equally tempered vs. meantone vs. Cajun etc.
I have indeed tuned a C/F Erica to 'Dedic' tuning (but still based on equal temperament) and there's no doubt it sounds much nicer than ordinary tuning. But by definition, you can't do Dedic tuning on a single voice instrument, so something else needs to be done.

I have also read more than one account of how old concertina makers tuned their instruments to sound very sweet indeed and I wonder if they used some sort of unequal, well-temperament (possibly combined with some octave stretching perhaps?).
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: TuneLab tuning software
« Reply #13 on: May 20, 2011, 08:28:36 AM »

Steve

I'm pretty sure octave stretching is a red herring where free reeds are concerned.  You just have to try tuning octaves to sound sweet and then measure the pitches and see if you have anything other than standard octaves.   Easy to do on a box that will play a single voice.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: TuneLab tuning software
« Reply #14 on: May 20, 2011, 09:05:26 AM »

Steve

I'm pretty sure octave stretching is a red herring where free reeds are concerned.  You just have to try tuning octaves to sound sweet and then measure the pitches and see if you have anything other than standard octaves.   Easy to do on a box that will play a single voice.
Thanks, Theo.
I have to admit it always bothers me when there is discussion of octaves being not true. I think that sweetness and 'life' in tuning, especially in a single voice instrument like a concertina, depend on how intervals such as fifths, fourths and thirds are tuned, and of course we are then back into thinking about different temperaments.

But I am also wondering about the acoustic coupling of octaves within the instrument across the range. I'm thinking mostly of concertinas but it could be applied to non-wet tuned melodeons too. For example - perhaps octaves could be tuned ever so slightly wide, so that a single note melody sounds bright and lively when ascending the range; but the octaves also pull each other into tune by acoustic coupling whenever chords (octaves, octaves with fifths) are played, so that the chords don't sound out of tune.

Not sure if I'm explaining myself very well here.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: TuneLab tuning software
« Reply #15 on: May 20, 2011, 09:14:18 AM »

I've done some work on the normal modes of a clampled-free euler beam under free vibration (which is a reasonable approximation to a reed) and the harmonics are not regular

I fully expected that; I was questioning whether those harmonics appear significantly in the airflow.

Quote
It isn't quite a square wave
Sorry, gross approximation. My point is that the air pressure waveform is very different from that of the reed's motion or of the forces transmitted to the block at the base of the reed (the latter being the equivalent to how the piano string transmits sound to the frame)

But if it were simply  matter of chopping the air flow into chunks as the reed vibrates in the reed plate slot, all the debate about machine-made reeds vs tipo a mano vs a mano would be meaningless, as each type would produce the same sound as another.

Ah - well played, sir!
Much of the difference may be in how the notes start. To the player, the responsiveness of the reed is one of the biggest differences, and to the listener, starting transients contribute much of the characteristic sound on an instrument. If you edit off the starting transient and play back the steady state sound of a trumpet and flute, for example, they sound remarkably similar (so I'm told, and I can believe it).

Anyway, it shouldn't take too much experimentation to find out empirically whether a free reed's air-sound harmonics are exact multiples of the fundamental. I'm surprised it hasn't already been done...
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: TuneLab tuning software
« Reply #16 on: May 20, 2011, 09:21:46 AM »

I'm looking at a couple of very cheap apps that will analyse a sound spectrum. 

I'm sure it must gave been done before,  but if anything has been published it's likely to be in German.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: TuneLab tuning software
« Reply #17 on: May 20, 2011, 10:58:45 AM »

I fully expected that; I was questioning whether those harmonics appear significantly in the airflow.

Much of the difference may be in how the notes start. To the player, the responsiveness of the reed is one of the biggest differences, and to the listener, starting transients contribute much of the characteristic sound on an instrument. If you edit off the starting transient and play back the steady state sound of a trumpet and flute, for example, they sound remarkably similar (so I'm told, and I can believe it).

Anyway, it shouldn't take too much experimentation to find out empirically whether a free reed's air-sound harmonics are exact multiples of the fundamental. I'm surprised it hasn't already been done...


Cool, just checking ;) Your point about how the notes start is pertinent and I'd heard that about trumpet and violin as well. The ear is a strange thing.

Replying to both Ukebert and Anahata....

I understand what you are both saying. But if it were simply  matter of chopping the air flow into chunks as the reed vibrates in the reed plate slot, all the debate about machine-made reeds vs tipo a mano vs a mano would be meaningless, as each type would produce the same sound as another. Yet I think most people would agree there is a difference. Furthermore, for example, Hohner reeds sound different to Voci Armoniche which in turn sound different to Binci reeds, etc. This applies even when there is only a single reed sounding. And accordion-reeded concertinas sound different to traditionally-reeded concertinas.

Then there is the difference between the sounds of brass reeds vs steel reeds.

So there must be other factors going on which influence the quality of the sound produced.

Well the design of the reed should make a difference. It certainly makes a difference to the vibration of a beam as I was saying earlier. The frequencies are dependent on taper in both planes, length and material. It isn't dependent on width for some reason or other and I haven't yet worked out why. But this is why I reckon that you can somehow correlate the vibration of the reed to the sound produced, by means of an applied force.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: TuneLab tuning software
« Reply #18 on: May 20, 2011, 12:08:44 PM »

The frequencies are dependent on taper in both planes, length and material.

And for real reeds its not just a simple taper in thickness, but the thickness profile is usually curved, and the thinnest part may be the tip or may be in the lower part of the reed.  Acoustic properties are also significantly affected by the thickness of the reedplate, the clearance between the reed tongue and the reedplate, the material or the reedplate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: TuneLab tuning software
« Reply #19 on: May 20, 2011, 12:41:54 PM »

Acoustic properties are also significantly affected by the thickness of the reedplate, the clearance between the reed tongue and the reedplate, the material or the reedplate.

Which goes some way to explaining why concertinas made with accordion reeds never sound quite the same as concertinas made with proper concertina reeds.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal