Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Xtreme button shape?  (Read 1570 times)

0 Members and 1 Guest are viewing this topic.

RickC.

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 133
Hohner Xtreme button shape?
« on: May 23, 2011, 03:54:46 PM »

I've been talking with a shop in the U.S. about the possibility of replacing the keyboard and buttons on an Erica.  Italian buttons are what I'm after, but this morning I received an email that mentioned Hohner Xtreme buttons as an option since they will fit directly on the arms.

My gripe on the Erica/Double Ray buttons is the sharp, squared-off edges.  Are the Xtreme buttons more rounded, like the Saltarelle, Castagnari, and Mengascini buttons I'm used to?  Also, they said the Xtreme buttons are 12mm in diameter-- I just mic'd my Mengascini buttons at .530", which comes out to just over 13.4mm.  I'm not sure I want to go any smaller than that, though the diameter of the stock Hohner button is not my problem.  I don't have a Hohner handy to measure the button diameter, what is the diameter of those?

Ha, another thing mentioned is those buttons are only in black pearl.  Not sure how I feel about that!


                Thanks,

   
                  Rick
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Xtreme button shape?
« Reply #1 on: May 23, 2011, 04:52:55 PM »

You should be able to fit Italian 13.7mm buttons.  That might be what Hohner are using.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

RickC.

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 133
Re: Hohner Xtreme button shape?
« Reply #2 on: May 23, 2011, 11:24:58 PM »

Many thanks, Theo.  I'm waiting for pics of the replacement keyboard.  If it's just a wooden replica of the stock Hohner keyboard with a thumb groove, I won't be interested.  I already went that route with Usui on a Double Ray and it introduced a lot of side-to-side slop with the buttons that drove me nuts!

 We'll see what they come up with.


                     Rick
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Xtreme button shape?
« Reply #3 on: May 24, 2011, 07:56:59 AM »

a lot of side-to-side slop with the buttons that drove me nuts!


If the new keyboard has a removable top or bottom then there is a simple solution - felt buffers between the buttons, glued to the under surface of the top panel.   They are pretty much a standard fitting on Italian flat keyboards.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

RickC.

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 133
Re: Hohner Xtreme button shape?
« Reply #4 on: May 24, 2011, 02:11:38 PM »

Thanks, and right-- those have been on every Italian box I've owned.  They were also on the fingerboard from Usui but the holes were oversized for the Hohner buttons-- something that always did aggravate me since the thing was made for Hohners. 

That aside, thanks for the reminder, we'll see what they have.   (:)

 
                                    Rick
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal