Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

[/tr][/table][/color]

That's where Bruno Le Tron has his F bass/chord.

Andy - Hypothetically speaking, is there a pull bass/chord that you wouldn't miss so much? My read is that you like the Hohner layout as is. My inexperience here leads me to have a much less nuanced veiw of things and I'm assuming there was/is a good reason for the layout.   
Logged
Brandon

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Changing bass layout on a 3 row GCF for French music?
« Reply #7 on: May 25, 2011, 12:12:50 AM »

That's where Bruno Le Tron has his F bass/chord.
Andy - Hypothetically speaking, is there a pull bass/chord that you wouldn't miss so much? My read is that you like the Hohner layout as is. My inexperience here leads me to have a much less nuanced veiw of things and I'm assuming there was/is a good reason for the layout.   

Actually, while it seems like Bruno Le Tron has "subbed out" the Dm/Amaj buttons, he actually has a standard G/C bass layout and has added four lower bass/chord buttons, and an inside row of accidentals. I think that it is more useful to think of Le Tron's box as a heavily enhanced G/C than as a modified G/C/F.

If you are going to convert the F row to a row of #s ("accidentals") then it makes sense to reconfigure the bass. The Amaj/Dminor bass/chord makes a lot of sense on a GCF and is perhaps less central on a G/C/acc box.  If you change some aspects of the G/C/F without changing others, you will not really be maximizing the advantages.

FYI the Amaj/D minor basses are used when playing in D minor on the C row, crossing into the F row.  If you tape off the third of the A major chord's reeds, then you can use the chord as a pressed A minor.  Today I was learning Fredric Paris tunes on the C and F rows and I used the Amaj/Dminor buttons quite a bit. If you get rid of those bass/chord possibilities, then you might as well change most of the notes on the F row because you'll be giving up so many of the reasons for G/C/F to begin with.

There is a lot to be said for getting a G/C/acc box instead of a G/C/F.  Changing a Gabbanelli to G/C/acc doesn't make a lot of sense because it is unlikely that you will ever recoup the expense of the conversion if you resell it.  For the direction you are going, it would make more sense (in my opinion) to get a used G/C box, or treat the C/F rows on your box as a (perfectly functional) C/F box, and learn it from a book (Milleret/Pignol for example) as if it is a G/C.  By the way, it is easy to use software on your computer to shift the pitch of the pedagogical recordings.  I recommend Seventh String Software's "Transcribe" for pitch shifting (and "slow downing"), but Audacity has features that allow this as well.

bb23

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
Re: Changing bass layout on a 3 row GCF for French music?
« Reply #8 on: May 25, 2011, 04:00:49 AM »

That explains it very nicely - as I suspected, not as simple a topic as it first seemed. Though a I m more attracted to the lower pitch of G/C, I'll probably learn a couple of these tunes on the C/F rows to ease the eventual transition to a 2 row G/C. Now, back to the music.
Logged
Brandon

daveyaaa

  • Member
  • *
  • Offline Offline
  • Posts: 22
Re: Changing bass layout on a 3 row GCF for French music?
« Reply #9 on: May 31, 2011, 05:16:02 AM »

I thought the same thing when I bought a GCF last year. I found the same advice in various places on this forum ( thanks everyone ). I learn the french tunes on the CF rows as I may get a small GC ( easier to cart around on two wheels ) so the fingering stays the same.
Logged
Pages: [1]   Go Up
 


Pages: [1]   Go Down

Author Topic: Changing bass layout on a 3 row GCF for French music?  (Read 2481 times)

0 Members and 1 Guest are viewing this topic.

bb23

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
Changing bass layout on a 3 row GCF for French music?
« on: May 24, 2011, 05:25:48 AM »

Hello all from a newcomer.  I have a 15 y/o Gabbanelli 3 row GCF. I started off with an interest in conjunto/Tex-Mex for which this creature was made to play.  I've more recently begun to joyfully dabble in some French music and am working on Pignol & Milleret book 1. My box is a bit heavy for the bellows work and I'm looking at 2-row options.  In the meantime, the lack of an F/fM bass on the push is the most notable downside of my current set-up.  I corresponded with an accordion tuner about changing a button to give me the push F/fM on the bass side. His response was that its probably not possible because of shared reeds between various chords on the bass side, hence, if I sacrifice a C or B flat, several other chords will be affected - something that hadn't occurred to me. 

Somewhere in the forum I saw a suggestion that reed sharing may only be a stradella issue.  As is often the case, this is a bit more complicated than I originally thought.  Can anyone enlighten me?   
Logged
Brandon

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Changing bass layout on a 3 row GCF for French music?
« Reply #1 on: May 24, 2011, 02:15:30 PM »

Hello all from a newcomer.  I have a 15 y/o Gabbanelli 3 row GCF. I started off with an interest in conjunto/Tex-Mex for which this creature was made to play.  I've more recently begun to joyfully dabble in some French music and am working on Pignol & Milleret book 1. My box is a bit heavy for the bellows work and I'm looking at 2-row options.  In the meantime, the lack of an F/fM bass on the push is the most notable downside of my current set-up.  I corresponded with an accordion tuner about changing a button to give me the push F/fM on the bass side. His response was that its probably not possible because of shared reeds between various chords on the bass side, hence, if I sacrifice a C or B flat, several other chords will be affected - something that hadn't occurred to me. 

Somewhere in the forum I saw a suggestion that reed sharing may only be a stradella issue.  As is often the case, this is a bit more complicated than I originally thought.  Can anyone enlighten me?   

I assume that you meant "the lack of the F/FM bass on the pull."
I don't know about Gabbanelli's bass reed config and whether or not they used reed-sharing (15 years ago?).

Since you just began to "dabble" in the French music, can I make some suggestions about playing a G/C/F box with standard bass rather than changing the bass layout?

Most of the French tablature/sheet music is written for G/C, even when G/C is not employed.  For instance, if you look at Fredric Paris's book, there is a list of which box he used for each tune.  Many tunes were played by FP on a C/F box, but for purposes of the sheet music, they were written out and tabbed for G/C, since G/C is the "pedagogical" standard.

So, I play G/C/F, with standard bass, and here are my methods for learning French and Breton tunes from tabs/sheet music for G/C:
1. First of all, acknowledge what the F row, and its corresponding basses, does for you.  You've got a full-featured C/F box at your fingertips, which has a very sweet sound.
2. When learning G/C tunes, decide whether you want to learn it in G/C crossing all three rows or transpose to C/F with exactly the same fingering as the tablature.
3. Transposing, using tablature, is not difficult.  Just follow the tabs fingering for G/C, treating your C/F rows as if they are G/C.  Your bi-directional Bb/Bb bass/chord will now stand for the F/F bass/chord in the tablature.
4. Learning G/C tunes on the G/C rows involves changing the tablatures/fingering.  Essentially, whenever a pulled F bass/chord arises, you'll change that measure to a pushed F and your fingering will move up to the third row.  If the measure involves changing bellows directions, i.e. F chord on both press and draw, then 90% of the time (i.e. unless the tune is bizarre) you will find the notes all on the press by crossing all three rows.

So, it's not quite true that you have "two boxes in one" i.e. G/C and C/F, because you can't learn G/C tunes exactly as they are written and played for G/C boxes, HOWEVER, you can learn tunes in G/C and C/F related key signatures (i.e. all the minor keys associated with G/C and C/F), and by changing your fingering pattern and bellows direction from the tabs, you can get all the basses and chords.  Once you do this for a few tunes you will find that it is not tricky or difficult. (In the way that you can play in D major on a G/C/F, but it is actually pretty difficult.)
The disadvantage, as I see it, is that, depending on how flexible your mind is in relation to muscle memory, once you learn a G/C tune crossing all three rows, it is a big step to change your playing if you ever do get a G/C box in your hands.  If you learn it in C/F, you can of course transfer the knowledge/muscle memory to any two-row quint-tuned box, G/C, A/D, Bb/Eb etc.

Now, whether you ultimately find that you want to play this kind of music on the Gabbanelli is another question.  Compared to Tex Mex, even through French music does involve cross-rowing, the styles typically involve more frequent bellows reversals, so if you find the box sluggish, it may be time for a change.

I hope this encourages you to give it a shot with the G/C/F before changing the basses.
-Andy, now off to learn a Fred Paris tune, transcribed for G/C, on a G/C/F box on the C/F rows! (Truly!!!)

Gary P Chapin

  • L'Accordéonaire
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1950
  • We are all the Free Reed Liberation Orchestra
    • Accordeonaire -- my blog of the last 15 years
Re: Changing bass layout on a 3 row GCF for French music?
« Reply #2 on: May 24, 2011, 03:41:11 PM »

Agree with Andy.  I think the "standard" bass layout on the G/C/F is ideal for French music.  Listening to FP, especially, you really get a sense of how well the two suit each other.  Listening to Milleret and Pignot you get a sense of how far it can be taken.  What's interesting is that if you look at the tab for a lot of this stuff, many many of the tunes are played one-row.  Bourrees and polkas being no exception.

robriki

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 110
  • Saltarelle AD Nuage, Hohner CG Erica
Re: Changing bass layout on a 3 row GCF for French music?
« Reply #3 on: May 24, 2011, 06:51:15 PM »

One of my student have a Corona II modified so the Dm/Amaj button is an F in both ways.  So you get the layout a a GC and you can still do almost everything you can do with a regular GCF.
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Changing bass layout on a 3 row GCF for French music?
« Reply #4 on: May 24, 2011, 07:44:01 PM »

One of my student have a Corona II modified so the Dm/Amaj button is an F in both ways.  So you get the layout a a GC and you can still do almost everything you can do with a regular GCF.

I would really miss that pair of buttons!

bb23

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
Re: Changing bass layout on a 3 row GCF for French music?
« Reply #5 on: May 24, 2011, 07:56:04 PM »

First of all, thanks so much to the three of you - your comments are extremely educational.
 
I assume that you meant "the lack of the F/FM bass on the pull."

You're correct, that was a typo on my part.

Andy, almost everything you wrote was new to me. I read music, but know next to nothing about theory. As you suggest, I've been pushing for the F bass/chord and crossing rows and this works, though I end up tweaking additional measures to avoid running out of air.  I think this may improve as my bellows work improves - Pignol & Milleret are planning a sit down chat with me about improving my use of the air button withing 20 pages or so. 

3. Transposing,...

priceless comments/details on how to do on both treble and bass sides. 

Now, whether you ultimately find that you want to play this kind of music on the Gabbanelli is another question.  Compared to Tex Mex, even through French music does involve cross-rowing, the styles typically involve more frequent bellows reversals, so if you find the box sluggish, it may be time for a change.

The 3-row Gab (or the driver) certainly feels sluggish when it comes to bellows reversals.  I think a 2-row will make a nice addition (not replacement) to the family in the relatively near future.  You know, it took me several days of reading posts to disover the definition of MAD - dangerous waters indeed.
Logged
Brandon

bb23

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
Re: Changing bass layout on a 3 row GCF for French music?
« Reply #6 on: May 24, 2011, 10:16:30 PM »

One of my student have a Corona II modified so the Dm/Amaj button is an F in both ways.  So you get the layout a a GC and you can still do almost everything you can do with a regular GCF.
I would really miss that pair of buttons!
[/quote]
Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal