Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Waxing tool in closing down sale  (Read 6780 times)

0 Members and 2 Guests are viewing this topic.

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Waxing tool in closing down sale
« on: May 24, 2011, 11:49:35 AM »

Hi there,

A few years ago I bought a tool from a little web shop in the USA which is designed to work with bees wax (primarily for a craft called encaustic art) and has some perfect attachments that work like a fountain pen nib and trowel that can be adapted very well for melodeon use.  It is a low temperature iron that melts but doesn't burn the wax and can be very precise.

I've just found an email which says the shop is closing down and has 70% off everything until it closes on May 31st.  The iron with several tips is going for $7.10 + P&P which is an absolute steal.  I found Dorothy who ran the shop very helpful too - it's sad that she's closing down the shop.

Unfortunately for people in the UK the shipping is prohibitively expensive at $80!  But if you're in the USA then I would seriously recommend them as a brilliant melodeon waxing tool.

** EDIT - I just remembered that last when I ordered before from the UK, the system charged me that too, but Dorothy got in touch straight away and refunded my PayPal account $48 as it was far too much for shipping.  Be aware that they come with a US plug though and work fine with an adapter as they are dual voltage **

Here's a link for anyone interested

Cheers

Squeezy

PS - don't go for the wax they sell though unless you want a go at creating pictures with the stuff - it's not suitable for reed work.  Get some proper reed wax!
« Last Edit: May 24, 2011, 12:54:57 PM by squeezy »
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Waxing tool in closing down sale
« Reply #1 on: May 24, 2011, 01:40:47 PM »

I bought one of these last year, in the UK they cost around £30. It works really well for waxing in reeds as long as they aren't too close together. I modified a spare nib by filing away at it such that it can manage small gaps, but not as small as those on Liliputs/Preciosas. The heat is also not controllable, so if you need the wax to flow more readily it isn't appropriate. However, it is very easy to use and is ideal for waxing in plates or pallets.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Waxing tool in closing down sale
« Reply #2 on: May 26, 2011, 11:53:36 PM »

Where did you get it from Ukebert?  I couldn't find any for sale in the UK.  I too have modified the attachments with files and a dremel and made the large trowel attachment in to a spoon with a channel to let the wax flow out of it with very good results.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Waxing tool in closing down sale
« Reply #3 on: May 27, 2011, 10:48:03 AM »

Where did you get it from Ukebert?  I couldn't find any for sale in the UK.  I too have modified the attachments with files and a dremel and made the large trowel attachment in to a spoon with a channel to let the wax flow out of it with very good results.

I can't remember I'm afraid. I must have had an email confirmation, but neither of my email addresses come up with anything when I search. A quick google shopping search does throw up a few sites, one being this one: http://direct.hobbycraft.co.uk/products-Encaustic-Art-Low-Heat-Stylus-Tool_5967.htm That could have been where I ordered it from.

I hadn't thought of making the trowel into a spoon, that's a very good idea. Mine only came with two nibs and a brush, but I might buy a trowel and have a play.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Waxing tool in closing down sale
« Reply #4 on: September 19, 2011, 11:26:21 AM »

I was reluctantly dragged round Hobbycraft by my wife a while ago, and Ukebert's posting about this tool sprang to mind; so I bought one.

It occurred to me that it could also perform as a soldering (waxing) iron, as the ones I have are very old Solon and Wolf models, with worn-down and now irreplaceable "bits". The Hobbycraft tool doesn't of course come with "bits" other than the encaustic tools. However, I had a stash of square copper boatbuilding nails, and I found that the 8 gauge ones (about 4mm square) make very satisfactory tips, and fit the iron's recess. They can be bent to any angle, cut to any length (they come at  3 1/2 inches long), made thinner or round if desired, and the tips hammered or filed to any shape - fine, flat, large, small, whatever you want. I've also made a couple of experimental spoons out of brass sheet.

I also bought a plug-in dimmer switch off the Web for £6.50, which is invaluable at keeping the iron to a working temperature to suit my own slow pace i.e. it doesn't melt too much wax too quickly at the right setting.

Thanks for the lead, Squeezy and Ukebert.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Waxing tool in closing down sale
« Reply #5 on: September 19, 2011, 02:07:46 PM »

My problem is that I reckon that there are times when it would be useful to have the wax a little hotter than the stylus will allow... so that it will flow into crevasses more easily. Not often, but sometimes, when plates are very close together.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Waxing tool in closing down sale
« Reply #6 on: September 19, 2011, 04:32:20 PM »

My problem is that I reckon that there are times when it would be useful to have the wax a little hotter than the stylus will allow... so that it will flow into crevasses more easily. Not often, but sometimes, when plates are very close together.

Is it possible to get the wax hotter when using an iron or the stylus? I've been experimenting with the dimmer dial settings on both types of tool, and it seems to me that once the wax reaches melting point that's it, and there's no performance or "usage" difference at higher tool temperatures; the application method or technique being the restricting factor, as the wax will run off the tip immediately it melts without getting hotter.

On the other hand, when waxing with a traditional spoon and wax kept liquid at high temperature in a double boiler, I guess that the wax may indeed be a lot hotter when applied and thus flow more as you describe. Or perhaps this is a false assumption on my part?
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Waxing tool in closing down sale
« Reply #7 on: September 19, 2011, 05:58:52 PM »

Is it possible to get the wax hotter when using an iron or the stylus? I've been experimenting with the dimmer dial settings on both types of tool, and it seems to me that once the wax reaches melting point that's it, and there's no performance or "usage" difference at higher tool temperatures; the application method or technique being the restricting factor, as the wax will run off the tip immediately it melts without getting hotter.

On the other hand, when waxing with a traditional spoon and wax kept liquid at high temperature in a double boiler, I guess that the wax may indeed be a lot hotter when applied and thus flow more as you describe. Or perhaps this is a false assumption on my part?

I think that sounds about right (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Waxing tool in closing down sale
« Reply #8 on: September 19, 2011, 07:15:16 PM »

I don't think using a dimmer switch to control the temp of a standard soldering iron is anywhere near as controllable as a standard 'gun' type soldering iron with a trigger switch.  Mine came with an oval shaped vertical blade attachment which works beautifully for waxing reeds.  You can control the temp very precisely by hitting the trigger when heat is needed and it cools down quickly when you take your finger off the trigger.  I just dip the tip in the wax to get a drop and spread it on the reed.  It is not as fast as the traditional waxing spoon but is very accurate and uses less wax. 
Logged

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Waxing tool in closing down sale
« Reply #9 on: September 19, 2011, 08:06:44 PM »

I've got one of these:  http://www.handprinted.co.uk/Batik/tabid/54/CategoryID/0/List/1/Level/a/ProductID/5/Default.aspx?SortField=EAN%2cEAN 

I haven't done much with it yet, but it's very finely controllable in terms of getting wax where and how you want it, and looking promising so far.
Logged

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Waxing tool in closing down sale
« Reply #10 on: September 22, 2011, 01:35:56 PM »

I don't think using a dimmer switch to control the temp of a standard soldering iron is anywhere near as controllable as a standard 'gun' type soldering iron with a trigger switch.  Mine came with an oval shaped vertical blade attachment which works beautifully for waxing reeds.  You can control the temp very precisely by hitting the trigger when heat is needed and it cools down quickly when you take your finger off the trigger.  I just dip the tip in the wax to get a drop and spread it on the reed.  It is not as fast as the traditional waxing spoon but is very accurate and uses less wax. 

What make is your iron? All the ones with triggers I've seen have a double wire-loop type of bit which I don't think would work very well with wax.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Waxing tool in closing down sale
« Reply #11 on: September 22, 2011, 03:52:21 PM »

and uses less wax. 

Is it beneficial to use less wax?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Waxing tool in closing down sale
« Reply #12 on: September 22, 2011, 05:19:58 PM »

and uses less wax. 

Is it beneficial to use less wax?

I guess a better way to say it is that it allows you to control the amount of wax used more easily.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Waxing tool in closing down sale
« Reply #13 on: September 22, 2011, 05:23:44 PM »

I don't think using a dimmer switch to control the temp of a standard soldering iron is anywhere near as controllable as a standard 'gun' type soldering iron with a trigger switch.  Mine came with an oval shaped vertical blade attachment which works beautifully for waxing reeds.  You can control the temp very precisely by hitting the trigger when heat is needed and it cools down quickly when you take your finger off the trigger.  I just dip the tip in the wax to get a drop and spread it on the reed.  It is not as fast as the traditional waxing spoon but is very accurate and uses less wax. 

What make is your iron? All the ones with triggers I've seen have a double wire-loop type of bit which I don't think would work very well with wax.



It is a weller,  The standard soldering tip is removable and it come with a vertical blade tip which is what I use.  See here:

http://www.amazon.com/Weller-8200-Universal-Soldering-Gun/dp/B00002N5LN
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Waxing tool in closing down sale
« Reply #14 on: September 23, 2011, 06:03:49 AM »

Is it beneficial to use less wax?

Just out of interest, is there an optimum amount of wax? My old Hohners seem to have a fairly substantial amount of the stuff, and I have some blocks from a Koch where the wax is the full depth of the reedplates and actually comes over the edges on to the top face of the plates. On my Saltarelle the wax comes about halfway to two-thirds up the edges of the plates, a bit less than the Hohners. I've been using Charlie Marshall's paintbrush method, which leaves a very neat line of wax, well clear of the top edges of the plates, and deposits noticeably less wax than the above.  I haven't (so far!) had any problems with leaks or plates working loose, so as long as the plate is held firmly and reliably is there such a thing as too little wax? Just wondering.......

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Waxing tool in closing down sale
« Reply #15 on: September 23, 2011, 08:15:26 AM »

is there such a thing as too little wax? Just wondering.......

I'm wodering too!

Chinese made Hohners seem to have have significantly thicker wax than older ones.  Italian boxes of all makes seem to have quite thick wax. My reasoning is that too little wax might not hold the reeds firmly enough, and is more likely to have the occasional air leak, so I use a generous amount of wax.   Don't spoil the ship for a ha'porth of tar.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Waxing tool in closing down sale
« Reply #16 on: September 23, 2011, 08:51:15 AM »

is there such a thing as too little wax? Just wondering.......

I'm wodering too!

Chinese made Hohners seem to have have significantly thicker wax than older ones.  Italian boxes of all makes seem to have quite thick wax. My reasoning is that too little wax might not hold the reeds firmly enough, and is more likely to have the occasional air leak, so I use a generous amount of wax.   Don't spoil the ship for a ha'porth of tar.

Some time ago I enquired, in another forum thread  http://forum.melodeon.net/index.php/topic,6615.0.html, about the the need or otherwise to retain reed plate nails, pins etc. when rewaxing reeds. The consensus was that a well-waxed plate needs only wax to hold it, and my assumption from that is that plenty of wax is therefore needed for a firm grip, as you are then relying on "the belt" without "the braces".
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Waxing tool in closing down sale
« Reply #17 on: September 23, 2011, 09:28:52 AM »

is there such a thing as too little wax? Just wondering.......

I'm wodering too!

Chinese made Hohners seem to have have significantly thicker wax than older ones.  Italian boxes of all makes seem to have quite thick wax. My reasoning is that too little wax might not hold the reeds firmly enough, and is more likely to have the occasional air leak, so I use a generous amount of wax.   Don't spoil the ship for a ha'porth of tar.

On the other hand, the joint between plate & block is made only along the meeting-line of metal & wood, so IS there any advantage in filling up a lot of the spare space in between with wax?  Certainly in a glue-joint in timber too much glue is as bad as too little. I don't know whether that's a valid analogy - as I say, I'm just wondering out of idle curiosity........
Some time ago I enquired, in another forum thread  http://forum.melodeon.net/index.php/topic,6615.0.html, about the the need or otherwise to retain reed plate nails, pins etc. when rewaxing reeds. The consensus was that a well-waxed plate needs only wax to hold it, and my assumption from that is that plenty of wax is therefore needed for a firm grip, as you are then relying on "the belt" without "the braces".
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Waxing tool in closing down sale
« Reply #18 on: September 23, 2011, 10:42:21 AM »


On the other hand, the joint between plate & block is made only along the meeting-line of metal & wood, so IS there any advantage in filling up a lot of the spare space in between with wax?  Certainly in a glue-joint in timber too much glue is as bad as too little. I don't know whether that's a valid analogy - as I say, I'm just wondering out of idle curiosity........

Not quite comparing like with like.   Wax forms a fillet in the angle between reedplate edge and wood.   Glued joints in wood are usually made with a thin film of glue applied to meeting faces.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Waxing tool in closing down sale
« Reply #19 on: September 23, 2011, 10:46:48 AM »


On the other hand, the joint between plate & block is made only along the meeting-line of metal & wood, so IS there any advantage in filling up a lot of the spare space in between with wax?  Certainly in a glue-joint in timber too much glue is as bad as too little. I don't know whether that's a valid analogy - as I say, I'm just wondering out of idle curiosity........

Not quite comparing like with like.   Wax forms a fillet in the angle between reedplate edge and wood.   Glued joints in wood are usually made with a thin film of glue applied to meeting faces.

True.  I'll wait and see if any of my "paintbrushed" wax fails!
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal