Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Waxing tool in closing down sale  (Read 6767 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Waxing tool in closing down sale
« Reply #20 on: September 23, 2011, 10:47:56 AM »


On the other hand, the joint between plate & block is made only along the meeting-line of metal & wood, so IS there any advantage in filling up a lot of the spare space in between with wax?  Certainly in a glue-joint in timber too much glue is as bad as too little. I don't know whether that's a valid analogy - as I say, I'm just wondering out of idle curiosity........

Not quite comparing like with like.   Wax forms a fillet in the angle between reedplate edge and wood.   Glued joints in wood are usually made with a thin film of glue applied to meeting faces.
True.  I'll wait and see if any of my "paintbrushed" wax fails!
Wax seems to have a life of at least two decades, so don't go jumping to any conclusions!


Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Waxing tool in closing down sale
« Reply #21 on: September 23, 2011, 12:33:39 PM »

Has anyone noticed a change in sound with lots of wax as opposed to minimal?  I also do not use screws or nails, so use plenty of wax to make sure the reed doesn't get popped out, especially for shipping.  I talked to one person who swore that a lot of wax deadens the sound, I can see how that is possible, just haven't noticed it.

I like using bent tip medicine droppers.  I tried the paint brush and kept dripping on reeds, something I was doing wrong I'm sure.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Waxing tool in closing down sale
« Reply #22 on: September 23, 2011, 01:42:52 PM »

  I tried the paint brush and kept dripping on reeds, something I was doing wrong I'm sure.

So did I to begin with; I found that a smaller brush than you at first think necessary improved things, then it was a case of practice and getting the angle of the block in my left hand correct to apply the brush with my right (reverse if you're left-handed!) without dribbling. It's also important not to overload the brush. I think Charlie in his video recommends a no 3 or 4 (from memory - I haven't checked) but I found a 2 better on the treble end, and a 3 on the bass. They're small brushes, but you can always add more wax with a second pass.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Waxing tool in closing down sale
« Reply #23 on: September 23, 2011, 02:24:17 PM »

The thing I like most about the soldering iron technique is that it eliminates the fuming, stinking pot of wax.  I guess I've convinced myself that very little wax is needed to hold the reeds in place.  I use the minimum amount needed to fillet in the angle between the reed and the wood.  I have taken reeds off that have been waxed this way and the bond seemed plenty strong.  I can't imagine that extra wax in the fillet would change the sound much.  I am careful to get the reed in good contact with the wood with no wax under it.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Waxing tool in closing down sale
« Reply #24 on: September 23, 2011, 03:37:32 PM »

I have a vague idea that the amount of wax does vary the sound. What I don't know is how much effect that has, something to test perhaps.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Waxing tool in closing down sale
« Reply #25 on: September 23, 2011, 04:17:31 PM »

Good school project?

Where it makes some sense that it would affect sound is that there is a noticeable sound difference between brass based and aluminum based reeds, and it is plausible to me that wax would be somewhat of a sound buffer by encasing the base.  But the big question is, is it enough to make a noticeable difference.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Waxing tool in closing down sale
« Reply #26 on: September 23, 2011, 04:18:15 PM »

Is this what is referred to as thread drift?
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal