Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Beginner quebecois melodeon  (Read 15852 times)

0 Members and 1 Guest are viewing this topic.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Beginner quebecois melodeon
« Reply #20 on: August 26, 2008, 03:38:53 PM »

Michael Usui ( Dancemaster) does not currently have one row boxes. He was not happy with the design or workmanship so diod not reorder, However he is developing a better one row and may have them again.

As to Hohner. I like the Hohner one rows, light , fast, fun, easy to repair. When retuned can sound great.  Also consider the Ha113 and the Ha 112.  3 reed and 2 reed models. I have a mid 50's HA 112 in A that has been well played, inelegantly repaired, but I  still like it very much.  One day I'll treat it to an overhaul and make a 113 out of it.

I wouldn't pass up a good HA114 in C.  Commonly used in both Irish ( Johnny Connollly) and in Quebec tunes. Not as common as a D box but still useful. A good learner and good resale if bought at a fair price.  Get an older German one, wood keyboard if possible.

Consider also the Klingenthal units that were variously branded as "Regal" or "Galotta" or other names.; all from the same factory.  These, too, are fun boxes and good learners.  Savoy imported quite a few of these.  Tuned up they are fine. I played one for years.

Gabinelli imported some units labeld "King"  not bad.. A little quite but can be a good value...I would not pay over $500 for one of these.

As to "Cajun" built boxes. We all have our opinions  and favorite brands. There are some I would avoid but, in order not to piss anyone off I'll just say be careful, let someone help you when looking at these.

Tuning.  Many claim they can tune a box. Some actually can.  The Button Box does a decent job but be prepared to wait. Michael Usui can do it.  Some Quebec builders/players  will also tune.

best of luck..
Logged

Groovebox

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Beginner quebecois melodeon
« Reply #21 on: September 07, 2008, 07:10:01 PM »

i just found this: http://cgi.ebay.com/VINTAGE-HOHNER-INTERNATIONAL-ACCORDIAN-MINTY_W0QQitemZ140264000438QQihZ004QQcategoryZ16218QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

anyone know about this model? it looks somewhat like a corona but it says hohner international on it. anyway its in adg should i go for it or wait for a 1 row to pop up?
Logged
my hohner hasnt broken for 2 weeks!!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Beginner quebecois melodeon
« Reply #22 on: September 07, 2008, 11:30:21 PM »

That looks like an east german box, probably not up to the quality of a genuine Corona.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Beginner quebecois melodeon
« Reply #23 on: September 08, 2008, 01:45:00 AM »

That looks like an east german box, probably not up to the quality of a genuine Corona.

Hi Theo,
What's the history behind boxes like this?  It says Hohner on it -- did the East Germans continue to build in the original factory but a West German firm laid claim to the Hohner name, or what? 
-Andy

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Beginner quebecois melodeon
« Reply #24 on: September 08, 2008, 02:32:22 AM »

What's the history behind boxes like this?  It says Hohner on it -- did the East Germans continue to build in the original factory but a West German firm laid claim to the Hohner name, or what? 

Andy,

Most of the German factories were in Saxony, which became part of East Germany, but Hohner were in the Black Forest, which became part of West Germany.

"Hohner International" is a name that Hohner have used for cheaper imported brands, though I've heard strong rumours in the trade that some of their supposedly "German" lines have sometimes been made in the same factories...  :o

There's a thread about these accordions on ReyesAccordions.com (donde llevo puesto un sombrero diferente y me llamo "melodeonista"! )

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Beginner quebecois melodeon
« Reply #25 on: September 09, 2008, 04:30:57 PM »

Most of the German factories were in Saxony, which became part of East Germany, but Hohner were in the Black Forest, which became part of West Germany.

Ah, thanks.  So you think that Hohner contracted the Saxon factories at some point, perhaps to build the cheaper "Hohner International" models? (I guess that they were mostly red?)  Some of those Saxon factories later became "Weltmeister," right?
-Andy, who is interested in the history but definitely prefers Italian boxes...

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Beginner quebecois melodeon
« Reply #26 on: September 09, 2008, 04:52:22 PM »

Most of the German factories were in Saxony, which became part of East Germany, but Hohner were in the Black Forest, which became part of West Germany.

So you think that Hohner contracted the Saxon factories at some point, perhaps to build the cheaper "Hohner International" models? (I guess that they were mostly red?)  Some of those Saxon factories later became "Weltmeister," right?
Andy,

It's rather more complicated than that.

Under the communist regime all the Klingenthal (Saxony) accordion factories were amalgamated (in the old Weltmeister factory) under the name VEB Klingenthaler Harmonikawerke.

This particular Hohner International accordion is a product of that factory (though others have been Chinese, or Czech), but I've been told (by someone who bought directly from the factory) that they also made pokerworks for Hohner - and he showed me some that he said he had bought there! Other Hohners have been, and some appear to presently be, made in the Czech Republic.

Edited to change name from Harmona (the present company) to VEB Klingenthaler Harmonikawerke. Sorry!  :(

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Beginner quebecois melodeon
« Reply #27 on: September 09, 2008, 10:21:49 PM »

  It's rather more complicated than that.
Under the communist regime all the Klingenthal (Saxony) factories were amalgamated (in the old Weltmeister factory) under the name Harmona.
This particular Hohner International accordion is a product of the Weltmeister/Harmona factory (though others have been Chinese, or Czech), but I've been told (by someone who bought directly from the factory) that they also made pokerworks for Hohner - and he showed me some that he said he had bought there! Other Hohners have been, and some appear to presently be, made in the Czech Republic.

   About 1991, I bought (for about $215), a "new" two-row melodeon with the "Hohner" badge on it.  It was shown on Hohner USA's website at the time (or was that in the days of print catalogs????  Yes, Virginia, back in the days when we had to walk 8 miles to school in the snow, uphill both ways, you had to write a note, put a stamp on it, drop it in the post box, and wait to get your brochure or catalog in the mail a week or so later ... you young whippersnappers have no idea how good you have it) next to the "real" Pokerwork.  This model was black overall and had a gold trim atop the black but that gold trim was very thin and widely spaced compared to the "real" Pokerwork.  Also, the format and theme -- while similar -- was a good bit different in detail; this one was more "flowery" and "viney" in it's graphics.  But the biggest difference was "more black and less gold".

   It was marked "Made in the Democratic Repubilic of Germany" (i.e. "East Germany").

   I have no idea if this model was sold in other places under the Hohner badge or some other marque.  I'm guessing it was a Klinginthal box but that's just a guess.  Also, the tuning on the reeds seemed to deteriorate weekly.

BH NC USA
Logged
I love one-rows!  Four reeds kick butt!!!!

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Beginner quebecois melodeon
« Reply #28 on: September 10, 2008, 03:04:58 AM »

I've been told (by someone who bought directly from the factory) that they also made pokerworks for Hohner - and he showed me some that he said he had bought there!

   About 1991, I bought (for about $215), a "new" two-row melodeon with the "Hohner" badge on it.  It was shown on Hohner USA's website at the time (or was that in the days of print catalogs???? ... ) next to the "real" Pokerwork.  This model was black overall and had a gold trim atop the black but that gold trim was very thin and widely spaced compared to the "real" Pokerwork.  Also, the format and theme -- while similar -- was a good bit different in detail; this one was more "flowery" and "viney" in it's graphics.  But the biggest difference was "more black and less gold".

   It was marked "Made in the Democratic Repubilic of Germany" (i.e. "East Germany").

Let me clarify that I wasn't talking about East German/Hohner International versions of the pokerwork, but "real" Hohner 1140 1-row pokerworks, that had been bought "from the back door" of the factory in Klingenthal...  ???
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal