Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Stops to switches/couplers  (Read 6413 times)

0 Members and 1 Guest are viewing this topic.

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Stops to switches/couplers
« Reply #20 on: May 28, 2011, 05:08:59 PM »

I have stops but would prefer switches behind the keyboard for mid-tune changes, but have quite happily got around this limitation by just playing up or down the octave. It's obviously harder to do than just flicking a switch, but certainly makes you a better player!

On another note, listen to Spiers and Boden playing the Rochdale coconut dance and see if you can hear the really noisy Oakwood coupler mechanism in the stop before the octaves change down!
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Stops to switches/couplers
« Reply #21 on: June 02, 2011, 05:02:28 PM »

Just catching up on threads I've missed:
I've been trying to improve my basic knowledge of boxes, and am aware of the 'things' behind the keyboards on some larger models, so do they just bring in/take out sets of reeds to alter the sound?
Having listened continually to Saul Rose on his Handry, playing Banks of the Dee/Willaim and Nancy on 'Banquet of Boxes' there's several changes of 'sound' going on and I'm a bit puzzled.
I'm also a bit miffed as over our Whit weekend i had the chance to have a go on a Mory, but was a bit over-refreshed (  :|glug ) to really have a go.
 :|bl
Hey ho
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Stops to switches/couplers
« Reply #22 on: June 02, 2011, 05:23:47 PM »

Just catching up on threads I've missed:
I've been trying to improve my basic knowledge of boxes, and am aware of the 'things' behind the keyboards on some larger models, so do they just bring in/take out sets of reeds to alter the sound?
Having listened continually to Saul Rose on his Handry, playing Banks of the Dee/Willaim and Nancy on 'Banquet of Boxes' there's several changes of 'sound' going on and I'm a bit puzzled.
 :|bl
Hey ho
Q
The Mory and Handry are both 3-voice instruments tuned L M M+. On the RH treble end there are three switches behind the keyboard which control which banks of reeds are in use. Each switch has two positions: up = towards the chin, down = towards the knees.

Switch 1: up selects MM+, down selects M only
Switch 2: selects LMM+ in both up and down positions and overrides any previous setting.
Switch 3: up selects L only, down selects LM

On the LH bass end, there are 4 small-size stops, 1 is nearest the knees, 4 is nearest the chin. Selecting a stop by pushing down overrides any previous setting. Each stop controls whether the lowest bass reed (out of three) is selected AND whether the thirds are included/removed from the chords (dashed clever arrangement, what?)

Stop 1: All bass reeds in, thirds in.
Stop 2: All bass reeds in, thirds out.
Stop 3: Lowest bass reed out, thirds in.
Stop 4: Lowest bass reed out, thirds out.

Hope this helps....

« Last Edit: June 02, 2011, 11:37:33 PM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Stops to switches/couplers
« Reply #23 on: June 02, 2011, 11:05:22 PM »

Thanks for the definitive answer Steve..... looks like a complex set up, but a lot of variables there.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Nick Hudis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 334
  • Loffet Pro 18, Castagnari Casta
    • Themassageman
Re: Stops to switches/couplers
« Reply #24 on: June 03, 2011, 08:10:18 AM »

Just a thought Ollie

Unless you particularly like or need the MMM musette tuning, you would find a three voice LMM with stops would give you a greater variety of sounds.

My box for example can do:

M clear and pure like a concertina, nice for quiet reflective tunes with no bass
MM sort of standard workerday melodeon sound
LM rich and sonorous - my favourite setting
LMM all out rousing dance tunes

MM and LM blend well with other instruments.   
Logged
Nick

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Stops to switches/couplers
« Reply #25 on: June 03, 2011, 12:46:20 PM »

In reply to the original question.  The mechanism inside the Oakwood I recently parted with was as simple as it could possibly be - it's like a simple single stop to engage and remove the low reed on a three voice LMM.

Link to a picture of the mechanism inside RHS without reedblocks
The little box at the bottom is designed to stop the air getting through too much and contains that long piece of wire with a right angled piece soldered/welded on that the lever slots in to.

The lever itself with the slot that goes inside the box - pivoted on a bellows pin!

The slot on the main box with the underside of the keyboard showing at the front of the picture

What makes me think it might be hard to incorporate this kind of thing in an existing box even though it is simple - is that the Oakwood needed to have reedblocks which had pieces cut away to allow the mechanism to operate underneath.  This is what it looks like with the reedblocks in (upside down I'm afraid)

Cheers

Squeezy

EDIT: Just saw LDT's post about the same box - yes it did make a bit of a noise!
« Last Edit: June 03, 2011, 07:22:12 PM by squeezy »
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Stops to switches/couplers
« Reply #26 on: June 03, 2011, 10:29:10 PM »

Great pictures Squeezy (:) Although I was kind of hoping that I would look at them and think "Ah, so that is why a Oakwood sounds great" :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Gary P Chapin

  • L'Accordéonaire
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1950
  • We are all the Free Reed Liberation Orchestra
    • Accordeonaire -- my blog of the last 15 years
Re: Stops to switches/couplers
« Reply #27 on: June 04, 2011, 01:55:47 AM »

The mechanism inside the Oakwood I recently parted with was as simple as it could possibly be -
Heck and a half, I am constantly amazed by how forkin' clever these devices are!

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Stops to switches/couplers
« Reply #28 on: June 06, 2011, 08:00:43 PM »

Many thanks for the pictures Squeezy! The photos really capture the details of the construction. Very helpful.

I'm puzzled by the arrangement of reeds for the bass end though. Looks like you've got three reeds for the octave - low, middle, high. The chords look like they use a lower note for the tonic with the third and fifth an octave higher. Is that correct?

Thanks,

Telemorris.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Stops to switches/couplers
« Reply #29 on: June 08, 2011, 11:02:07 PM »

Don't be puzzled!  That's how they are arranged.  My Saltarelle Connemara 2 models have a 3 voice bass as well giving a nice full tone.  With a stop to remove the low bass reeds it's kind of essential to have two reeds left for the lighter tone without sounding like a concertina.  On that particular box (no longer in my posession) some of the basses are MMH rather than LMH which made for an odd sounding light configuration.

The chords are again as you describe.

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal