Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Midi Electronics  (Read 2847 times)

0 Members and 1 Guest are viewing this topic.

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Midi Electronics
« on: May 30, 2011, 10:28:48 PM »

Hi

I have been thinking about getting midi fitted to the base side of an accordion. Now my simple way of thinking is you need magnetic type switches/contacts. some sort of circuit board, relay board, that's sends a message down a wire and into the sound module/expander.
Now the thing is it appears to be a closely guarded secret about what parts you need and where you buy them. I don't think the parts would be very expensive, as the biggest cost is the labour involved fitting it. Is there anyone on hear who had made up there own midi.
The easy thing for me would be to take it to a midi fitter, but that takes the fun out of it, I like doing things myself and enjoy the challenge.
Logged

Howard Mitchell

  • Guest
Re: Midi Electronics
« Reply #1 on: May 31, 2011, 12:16:05 PM »

Logged

rmenhinick

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Midi Electronics - Gutless Melodeon Wreck wanted!
« Reply #2 on: June 07, 2011, 03:51:51 PM »

I've got one of Tom Scarf's MIDI melodeon modules to play with and want to make a box up that "feels" like the real thing ... up to a point! I had wondered about just butchering an existing B/C box which I got cheap but it works (and sounds lovely) and I haven't the heart!

Basically I need a two row keyboard assembly that I can fit with either reed switches or gold wire contact switches. I think that electronic push buttons would do for the bass buttons but the treble end needs to be light and responsive like a real melodeon.

Does anyone have an old damaged box with a working two row keyboard mechanism for sale? One without reed banks would be fine ... and it doesn't even need air-tight bellows because Tom's box of tricks just has an in/out switch not a pressure sensor. If it has a bass end with 8 buttons even better!

I should add that the main reason for building this monster is to be able to compose tunes direct to MIDI (my ability to write 'dots' is very limited) and then use software to tweak the tune and write the dots out for me! If at first you don't succeed ... CHEAT!  >:E
Logged
Old G Poker, New DG Poker, ADG Compadre, DG Sandpiper, CF Erica, GC Delicia Popular, DG Dino Baffetti Black Pearl 3, Casali Verona 48 bass PA, (Squeezebox Squirrel :D)

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Midi Electronics
« Reply #3 on: June 07, 2011, 10:10:09 PM »

Hi

Why would you need to butcher a box to fit midi? unless you didn't wont the sound of the reeds. (may have just answered my own question). Could you not use the midi to enhance the sound of the 2 row row.

Where did you get all the connectors (i was looking for magnetic contacts) and wiring required. When i tried Tom Scarf he only supplied the module, and midi out plugs, at first i thought he would supply everything required. I am slowly going off the idea of doing it myself, although I would love the challenge.
Logged

rmenhinick

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Midi Electronics
« Reply #4 on: June 08, 2011, 10:51:38 AM »

Why would you need to butcher a box to fit midi?

I am planning a reedless box for silent practice and to convert tunes to MIDI.

At the moment I'm taking a "belt & braces" approach - I've ordered some promising looking pcb mounted pushbutton switches from eBay which I'll mount on stripboard to make a 2 row keyboard to test the module with (one row 10 one row 11 switches). Depending on how that feels to play, I'll either then make a suitable case, add the 8 basses and the in/out bellows lever, or adapt an old reedless box by using fixed magnets on the key levers and reed switches (small glass reeds are suitable but have to be mounted so that they don't get crushed).

I note that elsewhere on the forum someone has a MIDI melodeon prototype but doesn't like the feel of the elecronic push buttons he's used. I'm anticipating similar problems although push switches vary so much it has to be a "suck it and see" process! The main thing is to have a plan "B" ready.

Through the forum I've put out an appeal for a 2 row "wreck" and have a couple of replies so plan "B" is hot and ready to roll!

I'll document the project and post it here in graphic detail because I know the interest that there is in MIDI boxes/conversions and this one is going to be cheap! Cost so far is £15 for 30 push switches, £5 for stripboard, £40 for Tom Scarf's MIDI module. I have a suitable power supply, loads of diodes (for the key matrix) and also a couple of MIDI sound modules so I'm not anticipating much more than £75 for the whole shebang!
Logged
Old G Poker, New DG Poker, ADG Compadre, DG Sandpiper, CF Erica, GC Delicia Popular, DG Dino Baffetti Black Pearl 3, Casali Verona 48 bass PA, (Squeezebox Squirrel :D)

Jim

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
Re: Midi Electronics
« Reply #5 on: June 08, 2011, 11:46:37 AM »

I note that elsewhere on the forum someone has a MIDI melodeon prototype but doesn't like the feel of the elecronic push buttons he's used. I'm anticipating similar problems although push switches vary so much it has to be a "suck it and see" process!

I guess that might have been me? Either way, please do keep us updated if you find some good buttons. I've tried a few different buttons, some have an OK feel but are the wrong size / shape for melodeon buttons or can't be packed into a keyboard shaped enclosure. The ones I ended up using I bought online because they were the right size and shape but they are much too stiff.

I'm almost considering making my own keyboard from scratch, but I'm not sure I up to it.
Logged

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Midi Electronics
« Reply #6 on: June 08, 2011, 12:30:17 PM »

I've had a number of experiments over the years in this area.

Originally used some hall-effect switched salvaged from a computer keyboard.  These were great with an existing keyboard mechanism, I used a reedless polkawork case. The control circiutary was a Zilog Z80 - this was before the days of PICS. I got it working with a pressure switch to detect bellows direction but then experiments with a pressure sensor were not entirely successful.  I didn't have access to temperature-compensated devices or differntial sensors so the centre point (when the bellows are stationary) kept drifting off.  However the scanning and midi code worked well and it was connected to a stand-alone MIDI synth.  It also had code to select reeds and de-tuning.

Go forward a few years and I had a go using an Arduino board and more up-to-date pressure sensors from Freescale.  Much better result.  I started with push button switches as a test bed but the feel isn't right. Also used infra-red reflection sensors, like the hall-effect switches these don't change the feel of the keys at all.  Used this with a MIDI module but also with Ableton as the Arduino board has a USB MIDI output.  Also tried a blutooth connection which worked well but needed a special MIDI driver in the PC/Mac.

Howard



Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

Jim

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
Re: Midi Electronics
« Reply #7 on: June 08, 2011, 01:32:25 PM »

more up-to-date pressure sensors from Freescale. 

Have you got a source for these in small quantities?
Logged

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Midi Electronics
« Reply #8 on: June 08, 2011, 01:43:14 PM »

Farnell have them  http://uk.farnell.com

Freescale will also send you free samples if you can convince them that you are doing development of a new product - let's say a novel musical instrument that will sell in thousands :D

H
Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Midi Electronics
« Reply #9 on: June 10, 2011, 01:07:53 PM »

Has anyone had any Midi work done by Accordion Magic. If so how did you find there work and was the midi good.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal