Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Sticking valve?  (Read 1388 times)

0 Members and 1 Guest are viewing this topic.

Paul Davenport

  • Member
  • *
  • Offline Offline
  • Posts: 9
    • Hallamshire Traditions
Sticking valve?
« on: June 07, 2011, 03:05:49 PM »

I am experiencing a problem on my D/G Saltarelle Epsilon. The E on the D row only sounds when I am not playing a bass. If the pressure drops it is silent until I squeeze/draw harder. I reckon it's a lazy valve but don't know how to cure it, or even whether I should try. Can anyone advise?
Paul
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sticking valve?
« Reply #1 on: June 07, 2011, 03:13:17 PM »

I saw another Saltarelle yesterday with exactly this symptom.  Turned out there was some sort of foreign body stuck in the reed.   It was too small to see, but sliding a brass foil under and around the the reed cured it.  It could also be a valve not opening properly because something slightly sticky has got under the valve.    The same symptoms can mean the reed is set too high, but that is not likely to develop suddenly.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Paul Davenport

  • Member
  • *
  • Offline Offline
  • Posts: 9
    • Hallamshire Traditions
Re: Sticking valve?
« Reply #2 on: June 07, 2011, 05:06:02 PM »

Thanks Theo, my problem was exacerbated by my lack of knowledge regarding how to access said reed/valve. When I take the end off  can see only half the reed/valve set. The pronlem is on the side nearest the buttons but I can't see how to get at it.
Paul
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sticking valve?
« Reply #3 on: June 07, 2011, 05:39:42 PM »

You really need the right tools to get safe access to the underneath reed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Sticking valve?
« Reply #4 on: June 07, 2011, 05:48:26 PM »

I believe inserting any thing under the reed that lifts it in any way has the propensity to alter the set of a reed, even if only to the minutest degree, which can certainly explain the often invisible blockages that are often refered to, especially on the smaller reeds and where the inserting occurs right up to the rivet end, I also believe pinging can do the same and that quite often the perceived clearing of a blockage is infact minute resetting of the tongue. hope you get it sorted, mory
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal