Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: PA Farming?  (Read 2280 times)

0 Members and 1 Guest are viewing this topic.

HallelujahAl

  • Guest
PA Farming?
« on: June 10, 2011, 05:06:32 PM »

Probably a load of stupid questions, but how worthwhile is it trying to harvest suitable reeds from old Piano Accordions? There's always loads knocking around on places like ebay etc...mainly they don't look upto much as PAs any more, but is it worthwhile farming them for the reeds? How compatible are PA reeds with melodeons, I assume the reedplates for starters would be bigger on a PA? Then there's the fact that they're unisonoric, so would need re-tuning etc. But it surely is possible to replace individual reeds on a reedplate?
« Last Edit: June 10, 2011, 05:19:51 PM by HallelujahAl »
Logged

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: PA Farming?
« Reply #1 on: June 12, 2011, 12:54:14 PM »

There's so many rubbish 'worn out' PA's on Ebay that seem to get sold for unusually high prices, not many real 'bargain' these days, makes me think that they are being bought up by PA repairers and bits harvested for repairing other boxes. Rather than risk paying for a load of (possibly) rusty reeds that may have already been butchered by some ham fisted tuner sometime in the past, you would probably be better off buying new reeds specially designed for the job you want them for.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: PA Farming?
« Reply #2 on: June 13, 2011, 05:18:43 PM »

I too am interested in this question. I did pick up an old Paolo Soprani PA from Ebay. While the box and keyboard aren't worth repairing, the reeds are in excellent shape (no rust) and many other parts are salvageable.

I was interested to see that for a given note, the Paolo Soprani reed plates and reeds are several mm shorter, sometimes 6mm shorter, than a comparably pitched Hohner reed plate. I have a feeling reed plate dimension depends more on the manufacturer than whether it's a PA or Melodeon, but my sampling is only one data point and may not be indicative of any standard.

I've been thinking about using the PS reeds for my first instrument since they should work well in a single voice instrument. My dilemma is how to deal with changing them from unisonoric to melodeon bisonoric. I'm currently thinking that I should use the PA reed plate corresponding to the higher of the two notes in a melodeon reed plate and add weight to lower the second reed. That way I'm not removing metal and it's a reversible process if need be. Comments??
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: PA Farming?
« Reply #3 on: June 13, 2011, 05:53:45 PM »

You might try farming C/C# boxes, old hohner corsas often go cheap and have 3 reeds per button plus you get spare bellows for a corona.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

zippydw

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: PA Farming?
« Reply #4 on: June 13, 2011, 06:27:28 PM »

Nothing new on 'farming'. In Chicago I recall seeing this being done 8 or 10 years ago.

I was looking for a reasonable replacement for my then 50ish year old Imperial PA. I tripped upon this music store on the southwest side (it is gone now) that had a large industrial bay in back of the store with PAs stacked floor top ceiling.

A accordion non-afficienado or a perverse cartoonist could have made sport of that!

The prices were astounding. The quality of the instruments did not seem that good. The fellow who owned the store said he grabbed every PA he came across since there were so few places in Chicago that sold them.

It seems that the only place left is the Venerable Italo American Accordion company in Oak Lawn
Logged

Accordion Dave

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
Re: PA Farming?
« Reply #5 on: June 14, 2011, 03:04:19 AM »

I "farmed" some reeds from a piano accordion that I believe was thrown out an attic window.
The reeds have been installed in a Hohner One-Row "Pokerwork" that someone had converted to the key of B-Flat. They had taped off the holes for the E-Flat bass and triad chord. The reeds for E-Flat were missing.

The piano accordion reeds worked fine in this case because I needed E-Flat on both press and draw for the bass and E-Flat, G, and B-Flat for the chord in both directions.

As I have previously mentioned, the treble side is tuned quite dry in comparison to other Hohner One-Rows in my collection. I am guessing it was converted to B-Flat for Cajun Music.

Logged

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: PA Farming?
« Reply #6 on: June 15, 2011, 12:43:47 PM »

For a two voice instrument, could you remove one of the reeds from the plate, and rivet it on the other side?   That would give your two voices in one direction which might for example be G push.  Then use an A plate, do the same but mount it the other way round as A pull.

Or is there some reason why the pairs of reeds sounding together need to be on separate plates?
Logged
Tony S

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: PA Farming?
« Reply #7 on: July 19, 2011, 11:54:22 PM »

I picked up an old junker Paolo Soprani PA from Ebay about a month ago. The keys were delaminating and  falling apart, the bellows shot, the case cracked, the and it was only good for parts and sold as such.

After a great deal of testing, designing, cogitation, and so forth I decided there were enough reeds of the right pitches to create an LMM set of reeds for a D/G 21 button melodeon. I spent the last weekend teaching myself how to change the pitch of PA reeds with solder (scrap reeds first). I'm very happy with the results. The reeds have a delightful tone quality. I'm very much looking forward to hearing what these sound like in an instrument!

The reed plate sizes were somewhat similar to the Hohner plates I've measured though they vary more in terms of width throughout the treble side. Hohner treble reed plates for the T reeds that I've measured are 16 mm wide and the zinc H reeds I have are 17 mm. The Paolo Soprani reeds are variable from 16.2mm for the smallest reeds up to about 17.2mm for the largest on the treble side. On the bass side, standard Hohner Fundamentals measure 25mm wide by 65mm long, the tenors are 20mm x 50mm. The Paolo Soprani bass reeds: fundamentals are 20.5mm approx. x 67mm and the tenors are 17.2 or so by 48mm long.

« Last Edit: July 20, 2011, 12:55:41 AM by Telemorris »
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal