Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Grain in accordion reeds  (Read 5099 times)

0 Members and 1 Guest are viewing this topic.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Grain in accordion reeds
« on: June 10, 2011, 10:39:27 PM »

Another question about reeds. Are any accordion reeds cut from steel with grain running lengthwise, i.e. Italian hand-made type or hand-finished type? My experience (and collection of accordions) is limited to a pile of German handiwork in the spare room.  ;D

I had a close look at a set of old Hohner reeds this afternoon and saw the grain is running perpendicular to the length of the reed which seems like a liability in the long run. The reed flexes (and breaks) across its length, I imagine the orientation of the grain would have some effect on its performance characteristics, a little like the orientation of the grain on a piece of wood.

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Grain in accordion reeds
« Reply #1 on: June 11, 2011, 10:55:10 AM »

I'm not sure that what you're seeing is grain in the steel rather the grinding marks which are across the reed.
Take a look at http://www.britishpathe.com/record.php?id=417 at the very beginning.

Howard
Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Grain in accordion reeds
« Reply #2 on: June 13, 2011, 11:43:19 AM »

Metals do not have linear grains as do woods.  As howard says, you are most likely seeing grinding marks or maybe rolling marks.  Ideally, there would be no marks at all as they cna all act as stress raisers, where the metal will fatigue over the years and cracks develop.

Rob.
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Grain in accordion reeds
« Reply #3 on: June 13, 2011, 11:28:26 PM »

My working knowledge of metallurgy is extremely limited, so thank you both for the information. And Howard, that's a fascinating and terrific film! I was using "grain" in a loose way to describe what I was seeing.

I brought up the issue because I noticed on the marks on the Hohner reeds were running at right angles to the length of the reed, and I read a review of a harmonica wherein the manufacturer was making reeds with a lengthwise grain for longevity (so he described it) and wondered if accordion makers might do the same thing. Does machining a reed one way or the other have any effect on its rigidity and thus its response?

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Grain in accordion reeds
« Reply #4 on: June 18, 2011, 04:43:16 AM »

My working knowledge of metallurgy is extremely limited, so thank you both for the information. And Howard, that's a fascinating and terrific film! I was using "grain" in a loose way to describe what I was seeing.

I brought up the issue because I noticed on the marks on the Hohner reeds were running at right angles to the length of the reed, and I read a review of a harmonica wherein the manufacturer was making reeds with a lengthwise grain for longevity (so he described it) and wondered if accordion makers might do the same thing. Does machining a reed one way or the other have any effect on its rigidity and thus its response?

Interesting observation, I would say there is a grain or another such (appropriate maybe "draw marks") word in the metal as I think the metal that makes reeds would in fact be drawn, thus causing a slight grain, be it is not as critical as timber. Hohner reeds and none Italian hand made reeds are cut across the reed metal on a wider strip, thus allowing initial profiling across the reed with grinders before the reed is cut out, whereas the hand made reeds are cut along the length on a narrow width of reed steel.

I was having a close look at the Swedish reed strips in my workshop today, and here are some facts.
1.   The reed strips are punched out or cut in some other way and are 1200mm x 5 mm
2.   There is no bluing along the side edges but at either end there is bluing, thus making the original reed stock that these strips were cut across 120 mm wide.
3.   There is draw marks across these strips on either side under the bluing, and this is more pronounced on one side, and some are quite deep.
4.   Looking at some older reeds and under the bluing can be seen draw marks and again some are very deep across the reeds.
5.   These marks can be seen very clearly by the human eye.
I’m sure there is some very good reasons why some engineering practices would want those draw marks along the length.

Just looking at the facts above would indicate to me that there is a very good reason why the hand made reeds are cut along the length of the original stock because those draw marks across the reeds will in fact cause the reed to weaken and break far earlier than a reed cut down length of the reed stock.

Draw marks or Grain call it what you like, but they are there, and are important factors to take into consideration in making hand made reeds.

 
Another interesting thing to note is that if you have to do a lot of tuning to a reed to change pitch then you have to leave it to season overnight, and when you go back to it the following day you will find a few cents of shift in it.

I had friend who was a concertina maker (who was a tool maker as well) used to make his own reeds, he was a turner toolmaker during WW11, and he told me that when they cast the barrels for the war ships they left them in a field for about a year to allow them to season before they turned down the bore.

Metal along with timber has its own little quirks.
Peter
« Last Edit: June 23, 2011, 12:37:43 AM by Peter Stormy Hyde »
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: Grain in accordion reeds
« Reply #5 on: June 18, 2011, 04:47:12 PM »

I'm not sure that what you're seeing is grain in the steel rather the grinding marks which are across the reed.
Take a look at http://www.britishpathe.com/record.php?id=417 at the very beginning.

Howard
filmed in Islington eh.. maybe Crabb Concertinas that was (must ask Geoff on t'other side.
Discussed yr query this morning about 200 yards from that factory, while ordering some 18 gauge sheet of steel... serendipity. My mate who trained moons ago as an RR panel former / wood fitter suggests there is no grain as such in steel but may indeed have been surface marked as drawn or rolled.

As steel is an alloy of various metals at base the atomic structure is crystalline - "The point is that there are no steel "molecules," instead the atoms in steel are arranged in crystalline grains with little to no repeating geometries." (a quote from physics forum).

That said my mate suggests that perhaps brass may show more striations; caused as it is drawn out.

Q? Perhaps a break  can occur where the thinness of the bonding structure of the crystals UNDER those striations (which "look" like wood grains to the naked eye but under an e-microscope look as deep as valleys), leads to some crystals breaking away from others and so pop!

for how the crystals may sit and degree of bonding strength this looks intrestin'

http://www.chemguide.co.uk/atoms/structures/metals.html
« Last Edit: June 18, 2011, 05:08:28 PM by Kautilya »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Grain in accordion reeds
« Reply #6 on: June 18, 2011, 05:43:15 PM »

The text with the Pathe newsreel says that it's Wheatstone, not Crabb.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Grain in accordion reeds
« Reply #7 on: June 18, 2011, 05:50:41 PM »

I thought essentially steel acted like a liquid and acts like glass to some degree where a small fracture will lead to failure? mory
« Last Edit: June 18, 2011, 05:52:29 PM by mory »
Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: Grain in accordion reeds
« Reply #8 on: June 19, 2011, 01:02:43 AM »

The text with the Pathe newsreel says that it's Wheatstone, not Crabb.
\
Dont know how to read - only see pictographs at the talkies! >:E
Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: Grain in accordion reeds
« Reply #9 on: June 19, 2011, 01:39:17 AM »

I thought essentially steel acted like a liquid and acts like glass to some degree where a small fracture will lead to failure? mory
v interestin' = this is why wood is 'xtronger than' steel. Under Finnish building regulations you will often find that steel girders are regarded as weaker than wood beams and protected by wood/bonded wood laminates -- in a fire the steel will become brittle and collapse, long before the wood beams collapse through flame - in the Sibelius (almost all wood) concert hall the few steel beams are encased in wood to reduce the risk of the steel collapsing in the event of a fire.
No shortage of water for hoses as it 'attached' to the old Lahti sawmill which is on the lakeside!
http://www.sinfonialahti.fi/liput/en_GB/sibeliushall/

i have some construction pics somewhere....Actually there are better pics here

http://w3.upm-kymmene.com/upm/internet/upm_profi.nsf/sp?Open&cid=pianopavilion

and I can remember discussing over breakfast (there had been a n award-giving concert the night before) the amazing effect of the wood on the overall acoustics with the lucky winner =  woodworker piano chappy..... called renzo.........  he'd probably be a whiz at designing  and building a melodeon from scratch!>:E
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Grain in accordion reeds
« Reply #10 on: June 19, 2011, 09:15:50 AM »

Under Finnish building regulations you will often find that steel girders are regarded as weaker than wood beams and protected by wood/bonded wood laminates -- in a fire the steel will become brittle and collapse, long before the wood beams collapse through flame - in the Sibelius (almost all wood) concert hall the few steel beams are encased in wood to reduce the risk of the steel collapsing in the event of a fire.
No shortage of water for hoses as it 'attached' to the old Lahti sawmill which is on the lakeside!


If I can correct several misapprehensions about materials.

Steel does not act at all like a liquid.  Liquids flow into whatever shape they are contained in.   Steel keeps its own shape and needs powerful cutting, grinding or bending processes to change its shape.   

The structure of steel is crystalline at a microscopic level.   Glass is not

The crystal structure of steel is modified by the processes used to shape it.   Casting from molten steel gives a crystal structure that is the same in all directions, and the crystals are roughly the same size in any direction.  The size of crystals is greatly affected by the speed of cooling.  Processes which deform the steel while it is hot, but not molten, such as forging or rolling, will change the shape of the crystals so that they are elongated and all lying roughly parallel, this could be though of as a "grain" analogous to the grain in wood.  This grain is completely invisible to the naked eye.

Grinding marks on the surface of a steel object can weaken it significantly because the individual grooves act to concentrate the stresses in the steel at the tip of the groove and can act as the point where cracks will initiate. Polishing out all surface defects has the effect of strengthening the object.

I hope that clarifies things.   I studied material science many moons ago.  It is a complex subject with all sorts of counter-intuitive ideas, such as wood being more fire resistant that steel, which is recognised in building regs worldwide, not just  Finland.
« Last Edit: June 19, 2011, 09:17:31 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Grain in accordion reeds
« Reply #11 on: June 19, 2011, 10:01:49 AM »

Thanks Theo, well thats me told, unless of course YOU know any differant  (:) come on guys where's the debate?  ;) mory
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Grain in accordion reeds
« Reply #12 on: June 19, 2011, 02:37:13 PM »

Theo is quite right, although I'd quibble that casting does not give grains that are the same in all directions except under certain conditions. The cooling in a cast is reasonably complex, you end up with small grains on the walls (where heterogeneous nucleation takes place), which goes into columnar grains which then meet in the middle, forming a grain boundary along the length of the cast (a weak point). By heating the cast walls you can create an equiaxed region in the middle through homogeneous nucleation and by heating and using innoculants you can get an equiaxed structure throughout (as they form a surface for heterogeneous nucleation to take place).
« Last Edit: June 19, 2011, 03:18:17 PM by ukebert »
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Grain in accordion reeds
« Reply #13 on: June 19, 2011, 03:01:11 PM »

Yes, I know it is much more complicated,  but sometimes the explanation has to be geared to the context.
http://www.bbc.co.uk/archive/feynman/10701.shtml see 3.00 onwards
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Grain in accordion reeds
« Reply #14 on: June 19, 2011, 04:19:12 PM »

Yes, I know it is much more complicated,  but sometimes the explanation has to be geared to the context.
http://www.bbc.co.uk/archive/feynman/10701.shtml see 3.00 onwards


" deviation " ...  and a massive assumption of A.N.Others inability to understand whats on offer (the arrogance of science classically demonstrated I believe)  >:E  (:) mory

thats Mr Feynman not you Theo  ;)
« Last Edit: June 19, 2011, 04:29:32 PM by mory »
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Grain in accordion reeds
« Reply #15 on: June 19, 2011, 04:26:55 PM »

Before I read this thread, the title called to my mind the idea that maybe someone had been out in the barn practicing.... ;D
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Grain in accordion reeds
« Reply #16 on: June 19, 2011, 04:30:45 PM »

Before I read this thread, the title called to my mind the idea that maybe someone had been out in the barn practicing.... ;D

Much more fun  ;D mory
Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: Grain in accordion reeds
« Reply #17 on: June 19, 2011, 06:36:02 PM »

Before I read this thread, the title called to my mind the idea that maybe someone had been out in the barn practicing.... ;D
To be honest I first tort someone had found a piece of rice stuck up their bass reed and it was not sounding off properly and they wanted to know how to use logarithms to sort it out (remeber that old schoool chestnut about constipated mathematicians?) (Which reminds me to go back to jokes section.... and hooting owls

Anyway, [as I seem to forget saying somewhere else], all this for me is a P2C2U........ :|glug :|glug
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Grain in accordion reeds
« Reply #18 on: June 19, 2011, 07:25:20 PM »

Before I read this thread, the title called to my mind the idea that maybe someone had been out in the barn practicing.... ;D
To be honest I first tort someone had found a piece of rice stuck up their bass reed and it was not sounding off properly and they wanted to know how to use logarithms to sort it out (remeber that old schoool chestnut about constipated mathematicians?) (Which reminds me to go back to jokes section.... and hooting owls

Anyway, [as I seem to forget saying somewhere else], all this for me is a P2C2U........ :|glug :|glug


come on you wanted to play before  :D mory
Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: Grain in accordion reeds
« Reply #19 on: June 19, 2011, 09:25:50 PM »

Before I read this thread, the title called to my mind the idea that maybe someone had been out in the barn practicing.... ;D
To be honest I first tort someone had found a piece of rice stuck up their bass reed and it was not sounding off properly and they wanted to know how to use logarithms to sort it out (remeber that old schoool chestnut about constipated mathematicians?) (Which reminds me to go back to jokes section.... and hooting owls

Anyway, [as I seem to forget saying somewhere else], all this for me is a P2C2U........ :|glug :|glug

come on you wanted to play before  :D mory
not in the barn among the straw tho! But am really impressed everyone knows the P2C2U shorthand ref......... ;)

Going a bit deaf here with Durham Reel and Gwent Reel midis repeating themselves on headphones for last 20 minutes.... see learning by ear.dots/ ..........
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal