Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: b/c reeds in c/ci hohner  (Read 3077 times)

0 Members and 1 Guest are viewing this topic.

ofearghail7

  • Member
  • *
  • Offline Offline
  • Posts: 17
b/c reeds in c/ci hohner
« on: June 18, 2011, 08:59:38 PM »

Hi, Quick question. would b/c hohner reeds fit in a c/csharp hohner reed blocks, say a doubleray for example...... sorry if this is a stupid question. 
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: b/c reeds in c/ci hohner
« Reply #1 on: June 18, 2011, 09:39:00 PM »

Yes, they would - and no, it's not a stupid question.
Logged

ofearghail7

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: b/c reeds in c/ci hohner
« Reply #2 on: June 19, 2011, 12:03:44 PM »

fantastic! thanks a million.
Logged

ofearghail7

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: b/c reeds in c/ci hohner
« Reply #3 on: June 19, 2011, 07:51:52 PM »

next question, where would you pick up a set of b row reeds? from hohner themselves? or... replacements of the same quality?
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: b/c reeds in c/ci hohner
« Reply #4 on: June 19, 2011, 10:06:53 PM »

Did you give up on the soldering route then?
CGM could probably make up a set just for the one row though you might have to tailor the blocks a bit.
 If you want exact Hohner replacements Sutherland Trading would get you a set but you are looking at long wait (and the prices have gone up alarmingly.)
Logged

ofearghail7

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: b/c reeds in c/ci hohner
« Reply #5 on: June 19, 2011, 11:14:01 PM »

very good. i'll try them. the idea sort of fizzled out.....  its a mixture of impatience and lack of time and space. i might have to go back to it again. thanks for all the advice.
Logged

ofearghail7

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: b/c reeds in c/ci hohner
« Reply #6 on: June 25, 2011, 12:11:05 AM »

i finally did it. i put a set of cagnoni b/c reeds into the erica. had to open out the the blocks but they're in and working. next to tuning. also took the damaged red celluloid off. i'm aiming for a derek hickey/martin quinn type box. i intend to limit the button action and hoping to give it slightly bigger buttons but is this possible? also i've realised that the gaskets need to be changed or bellow pins altered and it must be varnished. can anyone suggest a good finish for it?
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: b/c reeds in c/ci hohner
« Reply #7 on: June 25, 2011, 01:39:50 AM »

can anyone suggest a good finish for it?

Danish Oil. Cheap, very low toxicity, very easy to apply, durable and looks and feels very nice.

Not sure about the buttons, I think Hohner only makes one size of their type, (interference fit directly onto the lever), but I suppose with a bit of work fitting plastic pistons to the levers you could use larger Italian-style buttons.
Logged

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: b/c reeds in c/ci hohner
« Reply #8 on: June 25, 2011, 09:03:40 AM »

Hi, Quick question. would b/c hohner reeds fit in a c/csharp hohner reed blocks, say a doubleray for example...... sorry if this is a stupid question. 


   Another 'stupid' question perhaps, but what has happened to the C/C# reeds?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

ofearghail7

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: b/c reeds in c/ci hohner
« Reply #9 on: June 25, 2011, 01:37:16 PM »

i still have them. one reed is cracked off alright but if anyone is interested in them let me know. i'm in Ireland but will most them.
Logged

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: b/c reeds in c/ci hohner
« Reply #10 on: June 25, 2011, 03:05:19 PM »

  I have sent you a P.M. ofearghail7.  ;)
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: b/c reeds in c/ci hohner
« Reply #11 on: June 25, 2011, 08:06:24 PM »

also i've realised that the gaskets need to be changed or bellow pins altered

Don't mess with the bellows pins! Replacing the gaskets is child's play and if the old ones are so compressed they leak you won't be doing the box any favours re-drilling the pin holes (and blocking off the old ones!) It's a pity you didn't realise this when you bought the new reeds.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

ofearghail7

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: b/c reeds in c/ci hohner
« Reply #12 on: June 25, 2011, 08:39:36 PM »

no? how would you compensate for the removal of celluloid? thinker gaskets?
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: b/c reeds in c/ci hohner
« Reply #13 on: June 25, 2011, 08:59:44 PM »

no? how would you compensate for the removal of celluloid? thinker gaskets?

Glue some strips of wood veneer in place of the celluloid.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: b/c reeds in c/ci hohner
« Reply #14 on: June 25, 2011, 09:22:26 PM »

Unless the bellow frames are plastic ones, the easiest option would be to block up the existing pin holes by gluing a rounded sliver of wood into them. All you then need to do is drill new pilot holes using the holes in the casings as a jig (keeping them hard against the bellows and the drill on the bellow side of the hole)
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: b/c reeds in c/ci hohner
« Reply #15 on: June 25, 2011, 11:03:17 PM »

no? how would you compensate for the removal of celluloid? thinker gaskets?

Am I going mad? The celluloid is an outer decoration of the end boxes and doesn't appear at all between the box ends and the bellows frame. Rees, an bosca, what on earth are you thinking of? You're both very clued up so I guess I must have missed something!  ???
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: b/c reeds in c/ci hohner
« Reply #16 on: June 26, 2011, 12:13:55 AM »

If we are talking Erica/erica shape Double-Ray, the celluloid does wrap round, albeit unpolished (only the square ones have bare wood edges)
Do you need some of my tablets ? ;)
Logged

ofearghail7

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: b/c reeds in c/ci hohner
« Reply #17 on: June 26, 2011, 08:37:20 PM »

thanks lads. i'll try that next so.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal