Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 5 6 7 8 9 [10] 11 12 13 14 15 ... 35   Go Down

Author Topic: Roland fr18 diatonic accordion - user group  (Read 265434 times)

0 Members and 2 Guests are viewing this topic.

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Roland fr18 diatonic accordion - user group
« Reply #180 on: December 02, 2011, 05:10:17 PM »

Here's a tablature settings file for the Traditional Irish style players with the following setup:

<snip>

Tab 7 - B/C/C# with standard basses

Download the tablature file at:

http://www.tradlessons.com/Roland/RDKC1.XML

(do a right-click "Save as..." for this one)


That's a very peculiar, non-standard BCC# treble layout. The B row is shifted up one button compared with a standard BC, and the C# row has the C#s on the pull instead of the push. Here is a standard BCC# layout, as found on a 37-key Paolo Soprani BCC#. (Ignore the experimental bass layout on this one).
« Last Edit: December 02, 2011, 05:27:58 PM by Bill Young »
Logged

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Roland fr18 diatonic accordion - user group
« Reply #181 on: December 02, 2011, 06:36:29 PM »

I was just including the one verbatim that was passed around earlier on this board, let me recheck it and make the required changes.
Can you point out where it came from originally?
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #182 on: December 02, 2011, 06:41:05 PM »

The B/C/C# in tablature 7 treble side is from Howard Mitchell's post on the first page of this subforum. The bass side is the default B/C bass tablature, matches my Saltarelle.

Attached are the layout currently in the file after edits.
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Roland fr18 diatonic accordion - user group
« Reply #183 on: December 02, 2011, 08:05:43 PM »

sorry but all of this is gibrish to me ( & probably many others)  who might be interested in a rolaand fr18 if making it work  in various keys, tunings etc could be undertood.  EVen the Roland Technical  Representative  on the muisic rooms stall at Whitby failed miserably to set one up with the rows to standard BCC# tuning and that with 24 hours notice!  Half decent Scottish tuning also didn't present itself!

Just what are 'patches' 7" 24" etc etc whatsits  & all the other wierd stuff thats being mentioned and is it necessary to have thourough knowledge of electronics and computors etc to be able to sort the bugger out properly.

I was coming slowly round to the idea of considering one   with the idea wrongly in mind that I would simpley have to  switch each row to  the required key and the electronics within would get on with the job of setting it up , also similarly the degree of wetness etc but alas from reaadidng the posts on this forum it seems to get more complicated by the day

Help!! ( or am I  - and the Roland rep - plain thick)

george ::)
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Roland fr18 diatonic accordion - user group
« Reply #184 on: December 02, 2011, 09:10:58 PM »

The B/C/C# in tablature 7 treble side is from Howard Mitchell's post on the first page of this subforum. The bass side is the default B/C bass tablature, matches my Saltarelle.

Attached are the layout currently in the file after edits.

Yes, the BCC# layout is OK now; though I prefer a layout with the C in the middle of the row, rather than those very low notes at the chin end. I have them on the Shand Morino but have never got down that far.
Logged

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Roland fr18 diatonic accordion - user group
« Reply #185 on: December 02, 2011, 09:57:09 PM »

sorry but all of this is gibrish to me ( & probably many others)  who might be interested in a rolaand fr18 if making it work  in various keys, tunings etc could be undertood.  EVen the Roland Technical  Representative  on the muisic rooms stall at Whitby failed miserably to set one up with the rows to standard BCC# tuning and that with 24 hours notice!  Half decent Scottish tuning also didn't present itself!

Just what are 'patches' 7" 24" etc etc whatsits  & all the other wierd stuff thats being mentioned and is it necessary to have thourough knowledge of electronics and computors etc to be able to sort the bugger out properly.

I was coming slowly round to the idea of considering one   with the idea wrongly in mind that I would simpley have to  switch each row to  the required key and the electronics within would get on with the job of setting it up , also similarly the degree of wetness etc but alas from reaadidng the posts on this forum it seems to get more complicated by the day

Help!! ( or am I  - and the Roland rep - plain thick)

george ::)
It's not quite as bad as that, George (but it's not easy, either!). There is no BCC# tuning built in as a factory standard. It needs to be programmed separately, using the Tablature Maker program, and loaded into the instrument. It's not too difficult, and the Roland rep should have been able to do it.
There is a multitude of settings, including many degrees of musette or wetness. It's all in the manual, but not always easy to find.
Roland describes the "reeds" available as 16', 8'+, 8', 8'-, 4', equivalent to L, M+, M, M-, H; and those are the numbers you've seen on the chart recently listed here. The 2.R.4.Y. etc that you've seen refer to the treble registers and the colours that they light up when pressed (Red, Yellow, Green). The crib sheet is a great piece of work which summarises all the various possible settings from different parts of the manual; but you'd really need to have the instrument in your hands to follow them.
If you haven't already done so, you can get an idea of what's involved by downloading the 72pp manual from this Roland USA site (I can't find it on the Roland UK site).
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #186 on: December 02, 2011, 10:46:10 PM »

I've had mine for three days and I'm feeling like I have a pretty good sense for how to do just about anything on it as far as settings, data loading, etc., but I will say, it's a complicated beast. I'm used to dealing with complex synth modules and sometimes bizarre user interfaces. The FR-18 does have a learning curve that you have to be willing to deal with if you are to reap the full benefits and capabilities of the instrument.

In my case, it was coming up with a set of user patches for Traditional Irish music that had the right two reed sound and musette detune from the large number of presets Roland provides as starting points.

Just getting to a patch can require several buttons, there are 12 banks of basic instrument models, each bank has 8 patches, but all this navigation is done using just a "Set" button and the four register selectors with three banks assigned to each register and lots of pretty lights to help you find your way. Well, most of the time, some operations are completely silent with no lights to tell you what you just did (like octave shifts).

For example, to select preset bank 9, patch 8 you may have to press the following keys: (worst case scenario)

Set (lights up BLUE)
Register 3 (since bank 9 would be in the third group of 4 groups of 3 banks each) (lights up RED to indicate bank 7 )
Resister 3 (lights up GREEN to indicate bank 8 )
Register 3 (lights up YELLOW to indicate bank 9 )
Set (BLUE light goes off)
Now to get to patch 8 in the bank, you press Register 4, which alternates between GREEN and RED for patch 7 and 8 assigned to that bank switch.

Parameter changes like setting a patch musette detune or effects settings involves pressing and holding the Set switch until it flashes blue, then pressing one of the treble keyboard keys that corresponds to the parameter you want to change (listed in the manual, you'll want a cheat sheet), then using either the register buttons or the increment/decrement buttons to change the parameter.  Once you have everything the way you want, you can have up to 4 User patches that are easy to quickly switch between. The four User patches can also be saved/loaded to/from a USB stick as one of 4 available configurations.

File load/store operations are similar, lots of pressing buttons in a certain order and interpreting flashing lights in particular colors that have particular significance (and consequences, like replacing all your user patches with new ones from a USB drive).

It can get really crazy, for example editing parameters on a saved User patch involves selecting the User patch by pressing the User patch button and then one of the four register buttons, holding the User patch button until it flashes RED, pushing and holding the Set button until it flashes BLUE, selecting the parameter number by pressing a key on the treble keyboard, editing the parameter, pushing the Set button to exit editing mode, pressing the User patch button, and the pressing a register button to save the edited patch back to one of the User patch memories. Not hard to do in practice, but it's a quite a few key presses and lots of flashing red and blue lights that actually mean something specific.

I have no problems dealing with the instrument now that I done the work to understand the light show and button operations, and it's really quite well thought out.  However, I would imagine that many people will find it completely off-putting, will never dive in and customize the patches or the tablatures, and as a result will be left with a negative impression of the instrument.  

If you'd rather stick your hand in a glowing furnace than deal with the sort of operations I listed above, do not get the FR-18, you'll be miserable.

That being said, after extensive customization of patches and tablatures for the style of music I play, I'm really pleased with my FR-18. Going forward, I probably won't have to do much more than just switch between my custom patches and tablatures, which is very easy to do and I have all my custom patches and tablatures backed up on the USB stick and on my computer in case I ever have to restore them should something bad ever happen.

« Last Edit: December 02, 2011, 11:12:49 PM by seisiuneer »
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Roland fr18 diatonic accordion - user group
« Reply #187 on: December 02, 2011, 11:12:21 PM »

but what is a 'patch'!?? - must be difficult to come uip with one , whatever it may be, if you don't know what one is or what it does. Is there not a way that the language spoken by electronic gurus can be translated into simple plain English ( or German or French or whatever)

george ( the luddite) or shouold it be he who is just thankful for a good steel reed & a tuning file!))
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #188 on: December 02, 2011, 11:22:24 PM »

You can think of a patch like a set of stops on a pipe organ.

You start with a certain basic sound, like a Cajun or Tex-Mex box reed. Roland has included 12 basic reed sounds in the instrument, all quite different.

For each patch there 5 variants of that basic reed sound that can be combined, think of them as pipe organ stops (Roland actually uses organ stops names in feet for them):

Octave down (Roland calls this 16, again pipe organ foot naming)
In-Tune (called 8)
Tuned flat (called 8-)
Tuned sharp (called 8+ )
Octave up (called 4)

Roland provides various groupings for their preset patches like a two reed version that has the In-Tune and sharp reed together, some have single reeds, some have all 5 together.

Now combine that with a setting for how much the flat and sharp reeds are defined (musette setting), some reverb and chorus effect styles and values, and you have a "Patch".  

There are 96 preset patches (12 accordion styles, 8 patches each) that you can modify. You can store up to four for quick switching on the main treble register buttons rather than having to navigate the whole patch select light show.



« Last Edit: December 03, 2011, 12:40:33 AM by seisiuneer »
Logged

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Roland fr18 diatonic accordion - user group
« Reply #189 on: December 02, 2011, 11:53:20 PM »

but what is a 'patch'!?? - must be difficult to come uip with one , whatever it may be, if you don't know what one is or what it does. Is there not a way that the language spoken by electronic gurus can be translated into simple plain English ( or German or French or whatever)

george ( the luddite) or shouold it be he who is just thankful for a good steel reed & a tuning file!))
George,
Think of a 'patch' as a particular sound setting. On an acoustic accordion, selecting MMM would be one 'patch', LM would be another 'patch', removing thirds from the basses would be another, and so on. The term comes from music synthesizers (which I suppose is what the Roland really is at heart), and there's a good definition here: http://en.wikipedia.org/wiki/Synthesizer#Patch

(The term is quite old. My wife was using patch cords to program IBM accounting machines when I met her in 1961, before going on to program a valve (vacuum tube) computer that was about as big as our dining room).
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Roland fr18 diatonic accordion - user group
« Reply #190 on: December 03, 2011, 10:06:37 AM »

thanks Bill, it now makes some sense!  Is there a Shand Morino 'patch' that sounds anything like authentic?

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Roland fr18 diatonic accordion - user group
« Reply #191 on: December 03, 2011, 03:54:40 PM »

thanks Bill, it now makes some sense!  Is there a Shand Morino 'patch' that sounds anything like authentic?

george
George,

The answer to that is - maybe! I haven't had enough opportunity to play the FR-18 to find out for sure.

When the Roland V-accordions were first introduced, there was published a list of the accordions that their various sets were based on: Classic - Bugari; Jazz - Excelsior; Italian Folk - Beltuna; German (D.Folk) - Hohner Morino; and so on. I found on the FR-3 CBA that the D.Folk set, with MMM reed setting and some adjustment of the musette "spread", gave a very acceptable "Scottish" sound. There must be a good possibility that Roland, having established a number of accordion sets already, would include the same ones in their new model. There is a D.Folk set on the FR-18, and MMM setting, so maybe that will sound the same. That would be my starting point, anyway.
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #192 on: December 04, 2011, 06:30:59 PM »

Here's the latest revision of what I'm using on my FR-18 for Traditional Irish
music:

Download the user patch file at:

http://www.tradlessons.com/Roland/U04.USD

Patches
1: Two voice 8/8+
2: Two voice 8/8+
3: Three voice 16/8/8+
4: Tenor sax, bass, strings, jazz drums (Just for fun)

Use function 35 on the FR-18 to load it from a USB stick.
« Last Edit: December 04, 2011, 06:35:18 PM by seisiuneer »
Logged

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #193 on: December 04, 2011, 07:03:23 PM »

Here's the latest revision of what I'm using on my FR-18 for Traditional Irish
music:

Download the user patch file at:
http://www.tradlessons.com/Roland/U04.USD
Use function 35 on the FR-18 to load it from a USB stick.

Thanks for the patches on the other Roland forum. I enjoyed them. On this message I can't get the link to work 'a character wrong' or somesuch reply
What I want to know, once you get your right hand sorted out is how you configure the basses  >:E - 
'You show me yours and I'll show you mine', or at least I will describe them
DaveW
« Last Edit: December 04, 2011, 07:12:33 PM by DaveW »
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #194 on: December 04, 2011, 08:25:21 PM »

Right click on the link to the file and do a "Save link as..." (or the equivalent on your browser). Copy the file to a blank USB drive and put it in the FR-18 (powered off). Then use function 35 on the FR-18 to load the patch set (see page 38 of the FR-18 manual for the details on loading user patches).

Here's the procedure:

The use of the USB memory stick at first seemed pretty obtuse to me, but it's the only way to save and restore settings on the FR-18.  Now that I've gone through the procedure a few times, it's pretty straightfoward:

Copy the U04.USD file over to a blank USB memory stick.

Make sure your FR-18 is turned off and insert the memory stick into the USB slot on the front of the instrument.

Turn on the FR-18. When it finishes starting up, press and hold the Set key until it flashes blue.

Press button 35 on the treble side (3rd button from the bottom on the bottom row). That selects the "Load User Program Set" function.  Since the file is U04.USD, the register select light #4 should light up red to indicate that it is available to load from the USB stick.  If the file had been named, for example, U03.USD, the register select light #3 would be lit. You can have up to four User Program Set .USD files (named U01.USD, U02.USD, U03.USD, and U04.USD) on the USB stick at any one time.

Press register #4 to load the patch.  You should see some activity on the USB stick as it loads the patch. After a second or two, it will be done.

Turn the FR-18 off and remove the USB stick.

Turn it back on, select "User Program" then press registers 1 through 4 to try out the new custom patches.


Cheers,

Michael
« Last Edit: December 04, 2011, 08:43:04 PM by seisiuneer »
Logged

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #195 on: December 04, 2011, 10:22:19 PM »

Here's the latest revision of what I'm using on my FR-18 for Traditional Irish
music:Use function 35 on the FR-18 to load it from a USB stick.
Michael - although I couldn't find fr-18 patches on your website (I tried this after I couldn't work the link) There is some amazing stuff on there. You may have changed the traditional music world forever :||:
DaveW
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #196 on: December 05, 2011, 04:39:01 PM »

Right click on the link to the file and do a "Save link as..." (or the equivalent on your browser). Copy the file to a blank USB drive and put it in the FR-18 (powered off). Then use function 35 on the FR-18 to load the patch set (see page 38 of the FR-18 manual for the details on loading user patches).
Thank you Michael - What I did wrong was trying to run the file instead of save it. But the cognoscenti will understand that until it is loaded into the instrument nothing happens. I have saved it elsewhere pending the purchase of a new USB stick. One could get in a muddle here  ???
DaveW
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #197 on: December 05, 2011, 07:17:39 PM »

Glad you got it sorted out!  Thank you for the kind words about my site and projects!
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #198 on: December 08, 2011, 07:21:37 AM »

Howard, on your wonderful YouTube videos what tuning and Tablature are you using?
Logged

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Roland fr18 diatonic accordion - user group
« Reply #199 on: December 08, 2011, 11:49:34 AM »

Howard, on your wonderful YouTube videos what tuning and Tablature are you using?


I can answer for tablature.  I mostly use Tablature 1 and sometimes 11.  Both transposed into the key(s) I need.
I like to have a dominant reversal (D on a G/D box) which Tab 1 gives me and the accidentals are very similar to my Salterelle and Gaillard boxes.

I can't remember exactly which voices I used for the videos.  I was experimenting at the time.  Note to self - put the tab and voice setting on future videos.

Howard
Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.
Pages: 1 ... 5 6 7 8 9 [10] 11 12 13 14 15 ... 35   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal