Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 15 16 17 18 19 [20] 21 22 23 24 25 ... 35   Go Down

Author Topic: Roland fr18 diatonic accordion - user group  (Read 265361 times)

0 Members and 4 Guests are viewing this topic.

bourree boy

  • Vieux Berrichone
  • Member
  • *
  • Offline Offline
  • Posts: 19
  • Loffet Pro A/D/G, Loffet Pro C/G/add, Roland FR-18
    • Toufeu-Toufolk association de danse Chassignolles
Re: Roland fr18 diatonic accordion - user group
« Reply #380 on: December 12, 2012, 09:08:00 AM »

Hi,
just bought one of these in Red - my local music shop here in France offered it 400€ below normal price and with Roland sac.
Getting to grips - have already played out twice now.  There is a google group, in French, which give the layouts for Bruno Le Tron and Stephen Milleret, complete with a ready made xls file to download.  Off to give it a try AFTER backing up the original.
When I was trying it in the shop there was a guy who played a chromatic version and he said they are fantastic and with such a light keyboard action it was so much faster than mechanical keyboards.  Wonderful for Auvergne bourrées.
 8)
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #381 on: December 18, 2012, 02:06:19 AM »

I see from the manual that you can theoretically import expansion sounds with a "BID" file name.  Anyone know where these can be obtained, if at all?

Thank You

Les

Les,

I asked Roland some time ago about .bid files and they said that there were none available for the FR18 as yet and there isn't an application to produce them for yourself.

However I managed to get hold of a .bid file for the Roland FR1/3/7 series and found that it can be made to work with the FR18.  Similarly the Roland set editor for the R1/3/7 works for the FR18 so long as you ignore features which aren't available and use the file extension .std instead of .st3
http://www.roland.com/support/article/?q=downloads&p=FR-3XB&id=62081390

This is all experimental so be careful!

Howard

Howard,

I would love to hear more about this, what are you using as your starting point for the .STD files (since there isn't a save for them on the FR-18, only load).

Michael
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #382 on: December 19, 2012, 12:34:45 AM »

For the FR-18, once you load up a BID file, like the VA-SE01 Alpine expansion set, does it replace the user sets 4-1, 4-2, and 4-3? The FR-18 user's manual has nearly zero information on how to use the expansion USB sticks other than how to load them into a sound bank, but after that, how do you actually access them? There's mention of two sound banks, but no mention on how to access the banks once they are loaded with new samples.
Logged

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Roland fr18 diatonic accordion - user group
« Reply #383 on: December 19, 2012, 09:22:07 AM »

For the FR-18, once you load up a BID file, like the VA-SE01 Alpine expansion set, does it replace the user sets 4-1, 4-2, and 4-3? The FR-18 user's manual has nearly zero information on how to use the expansion USB sticks other than how to load them into a sound bank, but after that, how do you actually access them? There's mention of two sound banks, but no mention on how to access the banks once they are loaded with new samples.

Roland's Central Europe website says that their VA-SE03 Orchestra Sounds Expansion is "Compatible with FR-3, FR-7x, FR-18d and FR-1x". However, there seems to be some doubt about this and I have been unable to get anyone from Roland to confirm that it definitely works with the FR-18. The manual implies that there are two memory banks where expansion sounds can be stored, but it is unclear to me whether these refer to the two standard locations (accordion and orchestral), or whether there are two previously unused locations into which the new sounds can be loaded. In any case, I have taken a chance and ordered a VA-SE03 USB stick. If the FR-18 is supported, then hopefully the package should include some installation and use instructions. If it works out and if others have not provided clarification in the meantime, I'll follow up here after I have had a chance to try it, which is likely to be in the New Year, since it's coming from Europe. By the way, there seems to be two different versions of the VA-SE03, one with "AccOrchestra" written on it and one without the "Acc", I don't know whether there is any technical difference between them.

Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #384 on: December 20, 2012, 03:10:49 AM »

Got it all sorted out, now also using the FR-3 editor to modify FR-18 orchestral patches, that's great fun. Just rename the .STD files as .SET and you can load them into the editor, modify the orchestral mapping, save back the .SET file, rename to .STD, copy to a USB stick, then load into the FR-18 using function 36.
Logged

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Roland fr18 diatonic accordion - user group
« Reply #385 on: December 20, 2012, 03:11:16 PM »

Got it all sorted out, now also using the FR-3 editor to modify FR-18 orchestral patches, that's great fun. Just rename the .STD files as .SET and you can load them into the editor, modify the orchestral mapping, save back the .SET file, rename to .STD, copy to a USB stick, then load into the FR-18 using function 36.

So, have you found an answer to your original query about .BID files?

I am interested in loading new sounds, which I understand is done by loading a .BID file using function 33. The "Importing optional expansion sounds" section on page 39/40 of the manual seems to imply that there are an additional two "permanent memory areas" where expansion sounds can be loaded, but it doesn't go into detail on how to select these expansion sounds once loaded. In any case, I am hopeful that this will be clear once the new sound module arrives.


Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #386 on: December 20, 2012, 06:56:13 PM »

Got it all sorted out, now also using the FR-3 editor to modify FR-18 orchestral patches, that's great fun. Just rename the .STD files as .SET and you can load them into the editor, modify the orchestral mapping, save back the .SET file, rename to .STD, copy to a USB stick, then load into the FR-18 using function 36.

This sounds fascinating and great fun but I'm sure I can't be the only one who doesn't quite understand :( and is paranoid about messing up big time!

I'd really appreciate it if you could go into a little more step by step detail regarding the procedure and what you have achieved.

I'm reasonably confident with the User Program procedures but you start to lose me at the 'FR-3 editor' bit?  ;)

I have no doubt that it's probably been mentioned on here before but I've come to the conclusion with the (Wonderful, I hasten to add) Roland User Group threads, that, whilst the information is most likely in here somewhere, it's now spread out over 20 pages and can take some finding.

I invariably start searching for one piece of information and end up getting deeply involved in some other subject that I discover along the way!

Anyone fancy writing a comprehensive user manual?

Many Thanks

Skipy
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

malcolmbebb

  • Hero Member
  • *****
  • Online Online
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Roland fr18 diatonic accordion - user group
« Reply #387 on: December 20, 2012, 07:47:58 PM »

I have worked as a technical author for a number of years, hardware and software. You give me a Roland, I'll write you a manual. Fair?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #388 on: December 21, 2012, 02:47:47 AM »

Got it all sorted out, now also using the FR-3 editor to modify FR-18 orchestral patches, that's great fun. Just rename the .STD files as .SET and you can load them into the editor, modify the orchestral mapping, save back the .SET file, rename to .STD, copy to a USB stick, then load into the FR-18 using function 36.

So, have you found an answer to your original query about .BID files?

I am interested in loading new sounds, which I understand is done by loading a .BID file using function 33. The "Importing optional expansion sounds" section on page 39/40 of the manual seems to imply that there are an additional two "permanent memory areas" where expansion sounds can be loaded, but it doesn't go into detail on how to select these expansion sounds once loaded. In any case, I am hopeful that this will be clear once the new sound module arrives.

Yes, you use function 33 to load the .BID file into the user memory area. You also have to load the two .STD files that are provided with the .BID expansion file into banks 4-1 and 4-2 using function 36 if you actually want to use the patches in the BID file. That leaves bank 4-3 open for some experimentation.

What I then did was to run the FR-7X set editor and created a new set, playing with modifying the Orchestral instrument options to create some new patches for bank 4-3. As far as I can tell, the set editor is really only useful for this purpose on the FR-18 as the program has no specific understanding of the FR-18 available sounds, other than the orchestral patches. The editor can be downloaded from http://www.roland.com/support/article/?q=downloads&p=FR-3XB&id=62081390

Once you create a new patch set, you can save it as a .SET file on your Windows or Mac system, rename it to S03.STD, copy it to a USB flash drive, and then load it into bank 4-3 on the FR-18 using function 36.  Now I have 8 patches in the 4-3 bank that have no accordion sounds mapped at all, but have some very specific orchestral sounds.

I've included my modified S03.STD file here as an example, you can rename it as S03.SET to play with it in the editor. Rename it to .STD or .SET as required (had to include as .TXT to post here).
Logged

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Roland fr18 diatonic accordion - user group
« Reply #389 on: December 21, 2012, 10:32:35 AM »

I've included my modified S03.STD file here as an example

Great, many thanks, that should come in handy when the new .BID files arrive and I want to access them. I work mainly on Linux and edit the XML files directly with a text editor. For the keyboard layouts, I did up a chart of the numeric values of the notes, which was easy to figure out, but I expect it might take a bit more work to figure out the various codes in these set files, I don't suppose you have invested any effort in this, i.e. decoding the meaning of the various numbers in your SO3.STD file, i.e:

<?xml version="1.0" encoding="utf-8"?>
<Roland_Fr_Set>
   <SET size="10604" number="1" offset="0">
      <SC size="50" number="1" offset="0"/>
      <O_R size="86" number="26" offset="50"/>
      <OB_R size="66" number="7" offset="2286"/>
      <OBC_R size="72" number="8" offset="2748"/>
      <OFB_R size="72" number="8" offset="3324"/>
      <TR size="94" number="16" offset="3900"/>
      <BR size="84" number="16" offset="5404"/>
      <BCR size="96" number="16" offset="6748"/>
      <ORR size="64" number="26" offset="8284"/>
      <OBR size="32" number="7" offset="9948"/>
      <OBCR size="30" number="8" offset="10172"/>
      <OFBR size="24" number="8" offset="10412"/>
   </SET>
</Roland_Fr_Set>

If all else fails, I'll switch to Mac and download the editor.
« Last Edit: December 21, 2012, 07:25:24 PM by GanAinm »
Logged

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Roland fr18 diatonic accordion - user group
« Reply #390 on: December 21, 2012, 11:32:27 AM »

This sounds fascinating and great fun but I'm sure I can't be the only one who doesn't quite understand :( and is paranoid about messing up big time!
My guess is that the users of this device could be roughly split into two categories:
  • Musicians who just want to know enough about it to get the sounds they want out of it.
  • Technically-minded people who want to push it to the limits and explore every possible option, in some cases, out of pure curiosity.

Whether intentionally or not, the manual seems to have been aimed at category 2 users.

As regards "messing up", this device has a "factory reset" feature, so I had much less fear about starting to tinker with settings on this than I had the first time I went about filing a reed on an acoustic box.

I'd really appreciate it if you could go into a little more step by step detail regarding the procedure and what you have achieved.
What I am trying to do is to add new sounds to it, as a first step, "official" sounds created by Roland, such as Cello and Reed Organ. If that works out well, I'll probably be tempted to have a go at recording sound samples myself and trying to install them. Why? - refer to category 2 above.

If/when I am successful with either of these, I'll be happy to post step by step instructions, if anyone is interested.
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #391 on: December 21, 2012, 02:04:33 PM »


 ....... I'll probably be tempted to have a go at recording sound samples myself and trying to install them........ I'll be happy to post step by step instructions, if anyone is interested.

Yes, Yes, Yes, Yes Please. Most definitely interested here!  :D

Oh, to be able to reproduce the 'Castagnari sound'  ::)

I'm sure I fall (or maybe stumble) into category 2 but once I'm pointed in the right direction, I'm sure I'll succeed.

Thank you for a comprehensive reply........ I can't wait to see how you get on  :D

Skipy
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #392 on: December 21, 2012, 08:04:27 PM »

While I believe that eventually we may be able to do some editing of the user patches using a desktop program based on the sounds built into the FR-18 and the official Roland Expansion ROMs, I seriously doubt we'll ever get to add our own sounds to the FR-18...
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #393 on: December 21, 2012, 08:34:08 PM »

....... I seriously doubt we'll ever get to add our own sounds to the FR-18...

Disappointed Oh and a sigh  :(

Also thinking "This sounds like a challenge...... to someone!"  >:E
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #394 on: December 21, 2012, 09:07:12 PM »

....... I seriously doubt we'll ever get to add our own sounds to the FR-18...

Disappointed Oh and a sigh  :(

Also thinking "This sounds like a challenge...... to someone!"  >:E

I'm guessing there's a lot more going on with the expansion ROM sounds regarding the physical modeling parameters, and I'm guessing that some of that would be considered Roland's "secret sauce" that they wouldn't want to freely expose. I have a lot of accordion and concertina samples from my iOS and Android apps that I would love to get into the FR-18, but I'm not optimistic that will ever happen.
Logged

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Roland fr18 diatonic accordion - user group
« Reply #395 on: December 21, 2012, 09:46:14 PM »

I have a lot of accordion and concertina samples from my iOS and Android apps that I would love to get into the FR-18, but I'm not optimistic that will ever happen.
Well, let's take things one step at a time and see what happens. I prefer to start out from the point of view that everything is possible and only rule something out if/when an insurmountable roadblock is encountered.  Since you already have samples, that should be a good starting point. Perhaps the system has been designed to make it difficult to load third party sounds, but then again, maybe not.
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #396 on: December 21, 2012, 10:24:36 PM »

Interestingly, the XML is the same for all three of my STD files, even after editing the orchestral patch mapping, but clearly the rest of the data is different.
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #397 on: December 22, 2012, 08:04:11 PM »

Hi y'all,

As a natural extension of my own native iPad MIDI controller app development,
I've been experimenting with using the iPad or iPhone/iPod Touch as a MIDI sound
module that I could play from my FR-18.

This started out as a development based on my own iOS controller apps:

http://www.tradlessons.com/apps.html#coremidi

and specifically:

http://www.tradlessons.com/HohnerMIDIMelodeon.html

but it soon became clear that the same synth apps that I use on the iOS device
itself could easily be played from the FR-18 using an IK Multimedia iRig MIDI
interface connected to the dock of the iPhone or iPad:

http://www.ikmultimedia.com/products/irigmidi/

In particular, I was interested in being able to play my own sample sets from
the FR-18, and the "ThumbJam" synth app has that capability, and now includes my
own accordion samples as a free download (demo video in the Hohner page above).
ThumbJam is unique in that you can create your own multi-sampled patches if you
have per-note recordings of an instrument, which is exactly what I had done with
my restored 1930s B/C box.

http://www.thumbjam.com

The main problem is that FR-18 puts out it's bellows pressure on MIDI CC 11,
while ThumbJam (and other synth apps and hardware) expect volume control to be
on CC 7, so one has to have a way to remap the controls. Turns out, as they say
"there's an app for that" as well, called "MidiBridge":

http://www.audeonic.com/#midibridge

What follows is pretty technical, and I'll need to at some point do a full
tutorial with screen shots, but I figure many of you will be able to use this
information:

Here's the hardware setup:

FR-18 MIDI Out ->
IK Multimedia iRig MIDI In->
Dock connector on the iPhone/iPad

For software, you need to buy and install the following two apps from the App
store:

ThumbJam
https://itunes.apple.com/us/app/thumbjam/id338977566?mt=8

MidiBridge
https://itunes.apple.com/us/app/midibridge/id449160859?mt=8

We will be using MidiBridge just to remap the keyboard variable velocity and
expression controls to fixed velocity and volume.

In ThumbJam, under the Sound menu, download my free "Vintage Accordion" patch.

Follow the instructions on this page for setting up ThumbJam to run in the
background on your device:

http://www.tradlessons.com/coremidisetup.html

Connect the iRig MIDI interface to the dock connector your device, and plug the
cable provided into the MIDI In on the interface, and the MIDI out on your
V-Accordion.

Run ThumbJam and from the Sound menu, select "Change Instrument" and pick the
"Vintage Accordion" patch you downloaded previously.

Close ThumbJam and run MidiBridge.

MidiBridge shows you all the inputs and outputs available on the device. Connect
the iRig MIDI input to the ThumbJam's input by touching first the iRig input
icon, then the ThumbJam output icon.

In the iRig input icon, you will need to enable two filters:

Velocity mapping - set to map all velocities to 127 (not absolutely required,
but I don't like having how hard I hit the keys change the sound, I want all my
volumes controlled by bellows pressure)

Holy mapper - remap CC 11 (Expresssion) to CC 7 (Volume)

With this setup, you can play any patch in ThumbJam (or really any other synth
app running on the iOS device) from the V-accordion and have the ability to
control the volume with the bellows pressure.

Again, I have a very strong preference for ThumbJam because it's one of the few
iOS synth apps that allows you to create your own patches from your own .wav
samples. That's a topic for another tutorial, but is well explained in the
ThumbJam documentation. I've provided both high quality concertina and
accordion sample-based patches to the ThumbJam developer, which he now makes
available as a free in-app patch download.

Here's a Flickr set that has iPad screenshots of the various settings for both
ThumbJam and MidiBridge. The exact same setup works on the iPhone and iPod
Touch.

http://www.flickr.com/photos/eskin/sets/72157632310658871/

Here's a quick demo video of the setup running ThumbJam and MidiBridge on an iPod Touch, with my "Vintage Accordion"
patch loaded into ThumbJam:

http://www.youtube.com/watch?v=v9xywp2woEY

I'll have to post another demo with non-accordion sounds. All the audio, including the reverb, is coming from the iPod Touch, not the FR-18.

It's incredibly amazing what's possible with just an iPod Touch connected via MIDI to
the FR-18 and a little amp connected to the Touch. Mindblowing, actually.  The same
setup works with many other CoreMIDI compliant synth apps running on the iOS device.

Cheers,

Michael
« Last Edit: December 23, 2012, 02:40:47 AM by seisiuneer »
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #398 on: December 23, 2012, 05:18:33 PM »


For software, you need to buy and install the following two apps from the App
store:

ThumbJam
https://itunes.apple.com/us/app/thumbjam/id338977566?mt=8



Be warned, Before you purchase Thumbjam. Check compatibility! It appears NOT to be compatible with 3rd Generation Ipods!

Apple want locking up when they do this  >:(

"Dear Father Christmas, please may I have an Ipod Touch 4th Generation?"

Ah, well, it's worth a try.......  ;)

Skipy
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #399 on: December 23, 2012, 05:28:42 PM »

Interesting, I've forwarded your comment about the 3rd generation iPod Touch to the developer of ThumbJam.

Did you install it and have it not work or read somewhere it wasn't compatible? It does require iOS 4.3 or later.

I'm using a 4th generation running iOS 4.3.1 and it works fine.

« Last Edit: December 23, 2012, 05:30:49 PM by seisiuneer »
Logged
Pages: 1 ... 15 16 17 18 19 [20] 21 22 23 24 25 ... 35   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal