Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 16 17 18 19 20 [21] 22 23 24 25 26 ... 35   Go Down

Author Topic: Roland fr18 diatonic accordion - user group  (Read 265275 times)

0 Members and 1 Guest are viewing this topic.

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #400 on: December 23, 2012, 06:03:25 PM »

I purchased both and whilst Midibridge installed, Thumbjam came up with the error 'The app was not installed because it requires a newer version of iPod software'.

On closer scrutiny, I noticed the requirements on the Apple Store Thumbjam page, The requirements are iOS 4.3 or later and I discover that the highest version of iOS 3rd Generation iPods can update to, is iOS....... wait for it...... 4.2.1!

It's my own fault, I should have read the small print, I just assumed that all software was compatible with reasonably earlier Ipods. I think I've only had it a couple of years.

I assumed incorrectly  :(

Now, where was I? Ah Yes

Dear Father Christmas....
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #401 on: December 23, 2012, 06:31:46 PM »

There were two versions of the 3rd gen iPod Touch. The 8 GB model was effectively a rebranded 2nd generation and is limited to 4.2.1.

The higher capacity versions did support all features of iOS 4:

http://www.everymac.com/systems/apple/iphone/iphone-faq/which-iphone-ipod-touch-ipad-models-fully-partially-support-ios-4.html

http://www.everymac.com/systems/apple/ipod/specs/ipod-touch-3g-specs.html

So, I'm guessing you have a 8 GB model?
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #402 on: December 23, 2012, 06:32:30 PM »

Well, at least when you upgrade, you'll already have the software... :-)  Works quite well on all iPad models as well.

I see 4th gen iPod Touches on Craigslist for less than $100
« Last Edit: December 23, 2012, 06:38:07 PM by seisiuneer »
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #403 on: December 24, 2012, 03:11:36 PM »

Yes, it's an 8GB model and I fear over here, the 4th generation are nearer £159.00.

Still, I've emailed Father Christmas and when I come in from playing tonight, I'll leave a healthy sized glass of my best brandy out, a couple of home made mince pies and pray!

Watch this space! :D
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #404 on: December 24, 2012, 05:07:47 PM »

Good luck! Hope Santa comes through with the goods!
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #405 on: December 25, 2012, 05:27:35 PM »


Hi y'all,

I tested the use of the iPad USB camera kit and USB connection to the FR-18 this morning with MIDIBridge and ThumbJam and it works perfectly on an iPad. (iPad 1, iOS 4.3.1)

Here's a screen shot of the MIDIBridge configuration after plugging in the FR18:

http://farm9.staticflickr.com/8078/8306755423_910ef90e50_o.png

Unfortunately the USB camera kit isn't supported on iPhone or iPod Touch (tried both), for those two, the iRIG MIDI is probably the simplest solution.

Cheers,

Michael
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #406 on: January 02, 2013, 09:04:10 PM »

Watch this space! :D

Well, Yer' Man never turned up with the goods  :( I am seriously starting to doubt the authenticity of the said Gentleman!

Still, I'm not one to hold a grudge but I really can't decide whether to;

a. Buy the latest iPod touch, thus avoiding the 'becoming obsolete after 12 months problem'.
b. Hang onto my current iPod and get an iPad
c. Wait a while and see if somebody really clever, can discover a way of getting 'our own' sound samples into the Roland.

Michael, can you foresee me getting Castagnari samples to play through/via the Roland using your Midi controller app developments idea?

That may be a deciding factor  ;)

Cheers

Skipy
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #407 on: January 02, 2013, 09:22:58 PM »

FR-18 - Buttons Coming Loose.

Following advice received and passed on regarding the occasional loose buttons on the FR-18, I dabbed a tiny spot of Loctite onto the thread head of just four suspect Bass/Chord buttons.

BAD IDEA, I fear!

I started playing on New Years Eve only to find the four buttons were sticking/sluggish   >:(

I carefully opened her up last night (a very scary but really interesting exercise) to dismantle the sticky button shafts and clean off the Loctite......... there was hardly any visible but clearly, there was just enough to cause problems!

All is well again now but I would be reluctant to use Loctite again and if I did, I would use only a micro dot on each thread.... literally!

Skipy
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #408 on: January 02, 2013, 09:42:10 PM »


..... I have taken a chance and ordered a VA-SE03 USB stick......



Have we any news yet?  :D


Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Roland fr18 diatonic accordion - user group
« Reply #409 on: January 03, 2013, 12:47:27 PM »

Have we any news yet?  :D

Yes, the VA-SE03 AccOrchestra sound expansion usb stick loaded up without problems on the FR-18, even though the  online shop in France where I bought it told me beforehand "The Va-se3 is made for FR1-3-7X and not for FR18, its impossible, sorry".

It came with a booklet containing step-by-step instructions, in English, on how to load it on each of the models, including fr-18. Since it comes with step-by-step instructions, I don't see any need to repeat them here.

However, apart from increasing my technical understanding of the instrument a little bit, it doesn't add any real value for me. I didn't spend a lot of time with it, but, as far as I am aware, there are no new accordion sounds on it, just the orchestral ones listed on the French site above.

My current understanding is as follows:
  • It appears that there are two empty expansion sound slots in a new box
  • Either or both of these slots can be loaded with additional sounds supplied by the manufacturer. I have not found any means to load one's own sound samples.
  • After the new sounds are loaded into memory, they can be accessed by re-programming one or more of the three User Sets, 4.1, 4.2, or 4.3 (red, green or yellow)
  • The package includes a selection of SETs, but these only cover a sub-set of the new sounds
  • There is no "official" way to access the remainder of the sounds, until Roland releases it's set editor for the FR-18 - this may be the reason why Roland Dealers say the fr-18 is not supported. In the meantime, for the technically-minded, it is possible but cumbersome to use the existing set editor to create new SETs. For example, by copying one of the sample SET files supplied on the usb stick onto your computer, e.g. S01.STD, then:
    • Re-name it to S01.SET (or S01.ST3)
    • Load it in the set editor
    • Modify it, e.g. select one of the new sounds which is not included in the supplied sample SETs
    • Save it
    • Rename it back to S01.STD
    • Follow the supplied instructions to load the new SET into the box, overwriting one of the existing default SETs (4 red, 4 green, or 4 yellow). If you later decide you don't want the new SET, you can restore the default, as per page 51 of the manual.
  • While it is possible to restore factory settings for most things, it does not appear to be possible to remove the expansion sounds once they are loaded. So, for example, if you buy it, try it out and then decide you don't want it, there doesn't seem to be any way to remove the software from the device, should you wish to return or sell on the expansion sounds module.
  • While the new sounds were not of any great interest to me, the cost-free ability to create SET files using the unofficial and cumbersome method above is of interest. It really opens up a lot of the possibilities and would be capable of consuming endless hours experimenting. For example, you can configure from 1 to 7 "reeds" to sound for each button, selecting:
    • Sound, e.g. D-Folk, Cajan, etc.
    • Octave: 16'(L), 8'(M), 4'(H)
    • Harmonic: 5' 1/3 (fifth M), 2' 2/3 (fifth H)
A word of warning, the above process of editing sets is cumbersome, unsupported and time-consuming. But, if you have time on your hands and you are comfortable with experimenting with technology, you can have hours of fun experimenting with the various sound possibilities and you shouldn't need to buy anything at all to try it out - although I used one of the supplied SET files as a base to start from, it should be perfectly possible to save one of the existing SETs from the instrument and use it as a base, you won't then of course have access to new sounds, but there's a lot of untapped potential in the instrument itself.

WARNING: the above is a summary of my own experimentation and is for information purposes only, use it at your own risk. I spent time on this over the holidays, but I am now back at the grindstone. I didn't keep any notes and I have written this from memory. There is absolutely no guarantee that what worked for me will work for you. The above information may be useful to people who, like me, are happy to tinker around with technology and take the risk that some irreversible error might crop up. Others, who are not comfortable taking such risks, might be wise to take the Roland Dealer at his word when he says that the expansion sounds don't work on the FR-18 and to wait for a future release of the SET editor. 
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #410 on: January 03, 2013, 08:46:21 PM »

WOW...... Now, that's what I call an answer!  :D

Thank you kindly, you have certainly enlightened me, for one!

I shall read again, absorb and decide.

I can just imagine you tutting when you read my five word question  ::)

I never imagined such a comprehensive and informative response and again, I thank you  (:)

Skipy

Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

CANNadian

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Roland fr18 diatonic accordion - user group
« Reply #411 on: February 24, 2013, 10:18:07 PM »

Hi all.  I'm new to both this site, and the FR-18, which I have had for about 1 month.  I LOVE IT!!!!  Trying not to get overloaded, however, with all that it can do. 

Have a few questions I hope someone might be able to help me with.

1.  The manual says that there are a total of 8 drum sets, changeable using the registers after holding the drum button until it blinks.  I am able to do so, however can only get 4 different sets (only 1 is available on each register rather than 2).  Any idea what I am doing wrong?

2.  Is it possible to program the chorus/bass buttons with different voices available from a different genre/register (rather than just using those available within the genre factory settings)?

3.  I notice that even though I have the bellows regulator fully closed, that air can still slowly go in and out even though I am not pressing the bellows button.  Is this normal (I hope my FR-18 doesn't have a hole in the bellows)?

4.  On some of the youtube demos, performers were able to loop their songs and play along with themselves.  Can't see how within the manual.  Does this require a separate device?

Thanks so much for any information you can provide.

Phil Cann
Logged

CANNadian

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Roland fr18 diatonic accordion - user group
« Reply #412 on: March 01, 2013, 05:19:46 AM »

Hi all.  I'm new to both this site, and the FR-18, which I have had for about 1 month.  I LOVE IT!!!!  Trying not to get overloaded, however, with all that it can do. 

Have a few questions I hope someone might be able to help me with.

1.  The manual says that there are a total of 8 drum sets, changeable using the registers after holding the drum button until it blinks.  I am able to do so, however can only get 4 different sets (only 1 is available on each register rather than 2).  Any idea what I am doing wrong?

2.  Is it possible to program the chorus/bass buttons with different voices available from a different genre/register (rather than just using those available within the genre factory settings)?

3.  I notice that even though I have the bellows regulator fully closed, that air can still slowly go in and out even though I am not pressing the bellows button.  Is this normal (I hope my FR-18 doesn't have a hole in the bellows)?

4.  On some of the youtube demos, performers were able to loop their songs and play along with themselves.  Can't see how within the manual.  Does this require a separate device?

Thanks so much for any information you can provide.

Phil Cann
Logged

bourree boy

  • Vieux Berrichone
  • Member
  • *
  • Offline Offline
  • Posts: 19
  • Loffet Pro A/D/G, Loffet Pro C/G/add, Roland FR-18
    • Toufeu-Toufolk association de danse Chassignolles
Re: Roland fr18 diatonic accordion - user group
« Reply #413 on: March 05, 2013, 03:43:11 PM »

Hi all,
reading the wonderful manual on P43 (parameters) it says all parameters except midi in/out CAN be saved in the global area, common to all sets.  Is this the default?  From what I understand the only way of saving to a specific set is to save to the 4 user sets.
Hope this makes sense to someone.
Now playing out at our local dance workshops here near St Chartier and the local love it when i slip in to one of the pipes or clarinet. Great fun.

Cheers,
Dave
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #414 on: March 06, 2013, 10:32:11 PM »

Hi all.  I'm new to both this site, and the FR-18, which I have had for about 1 month.  I LOVE IT!!!!  Trying not to get overloaded, however, with all that it can do. 

Have a few questions I hope someone might be able to help me with.

1.  The manual says that there are a total of 8 drum sets, changeable using the registers after holding the drum button until it blinks.  I am able to do so, however can only get 4 different sets (only 1 is available on each register rather than 2).  Any idea what I am doing wrong?

2.  Is it possible to program the chorus/bass buttons with different voices available from a different genre/register (rather than just using those available within the genre factory settings)?

3.  I notice that even though I have the bellows regulator fully closed, that air can still slowly go in and out even though I am not pressing the bellows button.  Is this normal (I hope my FR-18 doesn't have a hole in the bellows)?

4.  On some of the youtube demos, performers were able to loop their songs and play along with themselves.  Can't see how within the manual.  Does this require a separate device?

Thanks so much for any information you can provide.

Phil Cann

Hi Phil,

I'm pretty new to all this as well and I'm sure that there are many better placed to comment, however, to the best of my knowledge......

1. If you have the 'Drum Set' set to 'Register 1', then pressing a Bass Button will produce: Bass Drum + Hi Hat. Whereas pressing a Chord Button will produce: Snare + Tambourine.
If you have it set to Register 2, then pressing a Bass Button will produce: Ride Cymbal. Whereas pressing a Chord Button will produce: Jazz Snare + Pedal Hi Hat.
and so on through to Register 4.

2. No.

3. This is normal.

4. A few weeks ago I purchased the Roland BK-7m backing module which is wonderfully compatible with the FR-18 and opens up even more horizons than the FR-18 on its own, alas I've only just started exploring them.

As you have probably discovered by now, the manual is hard work and I've found it's easier to experiment, even if you're not quite sure what you're doing.......... there's always the 'Factory Reset' button  ;)

Enjoy

Skipy
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #415 on: March 07, 2013, 05:36:18 PM »

Hi all,
reading the wonderful manual on P43 (parameters) it says all parameters except midi in/out CAN be saved in the global area, common to all sets.  Is this the default?  From what I understand the only way of saving to a specific set is to save to the 4 user sets.
Hope this makes sense to someone.
Now playing out at our local dance workshops here near St Chartier and the local love it when i slip in to one of the pipes or clarinet. Great fun.

Cheers,
Dave

Hi Dave,

I may be wrong but my understanding is that once you have selected a Parameter different to the default setting and saved it, then that is how it will be set until you alter it. Similar to setting the tone/bass/balance on your car radio..... once set, it will sound the same no matter what station you are listening to (global and common to all sets).

For example, if you alter the 'Bellows Curve' (Button 16) to Register 4 and save it, then the Bellows Curve will be set to 'Heavy' whenever or whatever you play unless you alter the setting again.

Skipy

(E&OE)


Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Roland fr18 diatonic accordion - user group
« Reply #416 on: March 24, 2013, 12:29:03 AM »

First real gig with the roland tonight.  A morris feast!  great fun showing off with the different sounds but sadly I lacked expression. Back to the drawing board because it must be in there somewhere. After a few tinctures I realised I was trying to play a melodeon, but then went back to playing a roland. Just could not get the oomph though.  I  muddled through with the band and wished I had taken a proper box but the morris side had enough ale to not notice, but I need a lot more practice with this box. What are other roland players thoughts.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Roland fr18 diatonic accordion - user group
« Reply #417 on: March 24, 2013, 07:02:59 AM »

First real gig with the roland tonight.  A morris feast!  great fun showing off with the different sounds but sadly I lacked expression. Back to the drawing board because it must be in there somewhere. After a few tinctures I realised I was trying to play a melodeon, but then went back to playing a roland. Just could not get the oomph though.  I  muddled through with the band and wished I had taken a proper box but the morris side had enough ale to not notice, but I need a lot more practice with this box. What are other roland players thoughts.

Well you can slap my bottom with a wet lettuce if you like, but a Roland can be all things to all men/ women.
I'm not very computer literate and have set the machine up for ADG  but it still doesn't replace a melodeon. However, pretending to be Reginald Dixon  is fantastic.
My thoughts are, that if one was to take it to a Morris do, treat it as an extra and a novelty. Not as a replacement for the real thing.
I'll get me coat.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Roland fr18 diatonic accordion - user group
« Reply #418 on: March 25, 2013, 10:16:34 AM »

A novelty is certainly is, but it can also be a serious musical instrument which will be perfect for my dance band work which what it was used for at the morris feast. They have their own musicians for their own set dances which I would not have dared to intrude into with the roland. It was the 'lift' that I could not seem to find, if I had not been a dancer myself in a former life I would not have worried. I feel the dance, play tunes, that fit the dances, but even simple tunes like Blaydon Races and Salmon tails came out sounding like something you hear on street corners played by romanian buskers.

I reckon I'll have to work on the bellows settings a bit more.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

summerstars

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 301
    • UK Surnames Genealogy Contact Site
Re: Roland fr18 diatonic accordion - user group
« Reply #419 on: March 25, 2013, 10:26:43 AM »

I have given up trying to use the roland for solo tunes for the very same reasons - I do however find it very useful for accompanying singers or in ensembles where it is being used to fill in rather than lead the tune
Logged
Dino Binci D/G, Sandpiper 3v D/G, Sandpiper C/F, Hohner Bb/Eb, Pariselle 1 Row in D, Streb
Pages: 1 ... 16 17 18 19 20 [21] 22 23 24 25 26 ... 35   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal