Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 17 18 19 20 21 [22] 23 24 25 26 27 ... 35   Go Down

Author Topic: Roland fr18 diatonic accordion - user group  (Read 265335 times)

0 Members and 5 Guests are viewing this topic.

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #420 on: April 10, 2013, 06:03:23 PM »

Yes after about 18 months, I have reached similar conclusions. Good in a band when not competing with other free reeds, provided the volume is kept to a suitable level and melodious voices are chosen. I play to myself for fun, occasionally at Morris practice and also at a bothy session. The ability to change key is useful. I use mainly tab 11 set as ADG, but this can easily be altered to other configurations such as GCF to play in any of those keys or even C# to join in with guitar playing singers - they don't like it though. Playing from music, I transpose stuff to G  and then use the key change to play say in Fmaj. Battle on folks - its fun  (:)! DaveW
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

bourree boy

  • Vieux Berrichone
  • Member
  • *
  • Offline Offline
  • Posts: 19
  • Loffet Pro A/D/G, Loffet Pro C/G/add, Roland FR-18
    • Toufeu-Toufolk association de danse Chassignolles
Re: Roland fr18 diatonic accordion - user group
« Reply #421 on: May 20, 2013, 06:52:11 PM »

As an ex Morris man myself I fully understand the lack of lift.  I find that playing with my regulars for my wife's dance group it is wonderfully expressive at the end of a waltz or similar.  The clarinet is great for fast polkas.  As I play with one group who play their pipes and gurdy's in D/G and others who play in C/G it is very useful as my UK D/G box is too high - I have learnt to play the French way in the higher octave.
Must make somemore time to experiment more. 
Logged

sine labore

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Re: Roland fr18 diatonic accordion - user group
« Reply #422 on: May 25, 2013, 09:49:36 AM »

I had been considering purchase of an fr18 solely so that I could practice B/C or even B/C/C# later in the evening to avoid disturbing the neighbours. However, I don't think I could face up to the apparent complexities. I am sure that I am not the only one that would like a simple alternative that you just plug in and play.
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #423 on: May 26, 2013, 12:20:35 PM »

The Roland may look daunting for a start but it's a bit like the TV Remote or a posh Digital SLR Camera, it has lots of buttons and features that, when you first pick it up look bewildering! However, all you need to do is press a two or three buttons on either of the above to 'watch Eastenders' or 'take a photo'!

Within half an hour of taking my Roland out of it's box, I had it set up to B/C, was playing and exploring all the different sounds!

Within a few hours, I had it set up to B/C/C# with the melodeon sounds I liked!

As with the TV Remote (maybe not a good example.... what do half those buttons do?) and the SLR, as time goes on, you want to explore further and try out more features. It's the same with the Roland and once you get your head round the 'User Manual' (I use the term loosely) and following the advice on this Forum, you will soon be able explore further.

I have owned mine for about a year now and I love it! I played last night amplified in a pub, I have it set to B/C/C# with Orchestral Bass/Chords and by pressing one button, I can be playing Sax or another for Clarinet or another for a different melodeon sound :D

It is by no means perfect, it is not to every bodies taste and it is not a replacement for a melodeon (as such) but it is brilliant fun!

I've noticed that a few Members here have purchased one, tried it, not taken to it and sold it on after a year or so (probably not taking too much of a loss) and I'm sure many have kept theirs.

Unless you are a Luddite, I would not be put off by all the techie talk  ;)

Skipy
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

sine labore

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Re: Roland fr18 diatonic accordion - user group
« Reply #424 on: May 26, 2013, 12:45:34 PM »

Yes, maybe I should consider changing my user name to Luddite as I haven't the patience to figure out the machinations of the t.v.remote either.😳Thanks anyway.
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #425 on: May 26, 2013, 01:17:49 PM »

 
:D  Hhhmmm......... I have, out of curiosity, just picked up my TV Remote and looking at all the buttons along with all the 55 pictures/symbols on or next to them (one button has four symbols on it  :o ).................. I would suggest that using the Roland IS far easier  ;)

Skipy
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Roland fr18 diatonic accordion - user group
« Reply #426 on: June 01, 2013, 05:23:42 PM »

I successfully programmed a C-system chromatic accordion set up plus basic stradella bass today.

Anyone else done this and if so it would be nice to know what you came up with?

I set up the bass diagonally like a stradella but of course there are a few missing buttons at either end so I used the left hand "corner" for an A bass, A major chord and an A minor chord and the right hand "corner" for an E bass, E major chord and an E minor chord - sacrificing the Bb in the process.  These of course don't follow the usual "diagonal" convention but they kind of work!

This might work for me as I'm not too entrenched in stradella bass usage but would presumably throw you if you are!

I'm thinking I'll get a lot more use out of the FR -18 in this way even if this is not what it was intended for!!

My efforts as they stand are attached.
« Last Edit: June 02, 2013, 09:17:00 AM by Daddy Long Les »
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

bourree boy

  • Vieux Berrichone
  • Member
  • *
  • Offline Offline
  • Posts: 19
  • Loffet Pro A/D/G, Loffet Pro C/G/add, Roland FR-18
    • Toufeu-Toufolk association de danse Chassignolles
Re: Roland fr18 diatonic accordion - user group
« Reply #427 on: June 03, 2013, 12:09:46 PM »

I use the ready made settings from the French user group which includes a unsonore system C plus Stradella basses.
look here: https://groups.google.com/forum/?fromgroups#!topic/diatotrad-roland/w6BHLP9_THw

Dave
 :|glug
Logged

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #428 on: June 05, 2013, 02:58:10 PM »

I set up the bass diagonally like a stradella but of course there are a few missing buttons at either end so I used the left hand "corner" for an A bass, A major chord and an A minor chord and the right hand "corner" for an E bass, E major chord and an E minor chord - sacrificing the Bb in the process.  These of course don't follow the usual "diagonal" convention but they kind of work!
This might work for me as I'm not too entrenched in stradella bass usage but would presumably throw you if you are!
Why use the diagonal? Going straight across each column is not too difficult to accommodate. I've done it for stradella with bcc# treble, but don't use it much, preferring a push pull melodeon bass. Push /pull would not suit Continental C I guess. I have two tablatures with stradella bass, one starts with F and goes up to E and the other with Eb and goes up to D. Each column has Alternate bass, Bass note then Maj or (mostly) minor chord - You can take out the thirds by pressing all bass registers together. Two tabs allows for playing in more keys  DaveW
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Roland fr18 diatonic accordion - user group
« Reply #429 on: June 05, 2013, 03:00:57 PM »

I set up the bass diagonally like a stradella but of course there are a few missing buttons at either end so I used the left hand "corner" for an A bass, A major chord and an A minor chord and the right hand "corner" for an E bass, E major chord and an E minor chord - sacrificing the Bb in the process.  These of course don't follow the usual "diagonal" convention but they kind of work!
This might work for me as I'm not too entrenched in stradella bass usage but would presumably throw you if you are!
Why use the diagonal? Going straight across each column is not too difficult to accommodate. I've done it for stradella with bcc# treble, but don't use it much, preferring a push pull melodeon bass. Push /pull would not suit Continental C I guess. I have two tablatures with stradella bass, one starts with F and goes up to E and the other with Eb and goes up to D. Each column has Alternate bass, Bass note then Maj or (mostly) minor chord - You can take out the thirds by pressing all bass registers together. Two tabs allows for playing in more keys  DaveW

Yep - gone for a straight across stradella now but adopted the B system R.H. which I found easier than the C.
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Colombia20102018

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: Roland fr18 diatonic accordion - user group
« Reply #430 on: July 17, 2013, 12:49:22 PM »

Hello everybody, I need your help to answer a question. Is there a software that if I play my accordion would built a tablature of what I am playing? I do not mean a software that will allow me to write a tablature myself where I have to type it, but a software that will detect what buttons I am pressing and built a tablature based on that? So far I have two acustic diatonic accordions but I would be willing to buy a Roland FR-18 if there is a software that could do what I want. Thank you all  :)
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #431 on: July 17, 2013, 10:39:42 PM »

I have an FR-18 and the answer is "not easily". The FR-18 just transmits MIDI note-on/note-off events like a standard MIDI keyboard, if multiple buttons/directions are assigned the same note, then there is no way to distinguish which of the multiple buttons were used to play the note. 

Now, that being said, it may be possible with some intelligent software to come up with some rules based on your particular tablature and fingering standard to map the notes to specific buttons, but out-of-the-box, there isn't an easy way to do it.

One way that this could be done in theory would be to map every button and bellows direction to a different MIDI note number, then use an external MIDI data stream processor to remap the button/bellow direction mapped note numbers to the proper playback pitch for live performance while recording the raw data stream. One would then need to develop tablature generation software able to process the raw unmapped data stream to build complete tablature including button number and bellows direction.
« Last Edit: July 17, 2013, 10:41:19 PM by seisiuneer »
Logged

Colombia20102018

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: Roland fr18 diatonic accordion - user group
« Reply #432 on: July 25, 2013, 02:08:52 PM »

Thanks. I will stick to the acustic diatonic accordion for now then.
Logged

ronaldas

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Roland fr18 diatonic accordion - user group
« Reply #433 on: August 04, 2013, 11:28:33 AM »

Hello, my first post :-) 

I have just made a tablature of the B system chromatic and successfully installed it into the box. 

I did it being in total ignorance of what the numbers next to the notes signify, e.g. Bb3, A6 etc  but generally followed the helpful diagram provided earlier in this thread of a C system, and the pattern of sorts in the existing tablature in the manual, i.e., low numbers for the low notes, and high numbers for the high notes.  (I normally play tablature 11 - the Hohner Corona setup)

While I've transcribed all the notes correctly and I can get all the chords chromatically etc, I notice that when I play some chords, and scales the notes drop an octave when I don't want them to.  I assume that the numbers have something to do with it but don't know what is the correct procedure or if this is a problem with trying to make it a chromatic as well as diatonic.  Can someone help?
Logged

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Roland fr18 diatonic accordion - user group
« Reply #434 on: August 04, 2013, 12:04:58 PM »

Hello, my first post :-) 

I have just made a tablature of the B system chromatic and successfully installed it into the box. 

I did it being in total ignorance of what the numbers next to the notes signify, e.g. Bb3, A6 etc  but generally followed the helpful diagram provided earlier in this thread of a C system, and the pattern of sorts in the existing tablature in the manual, i.e., low numbers for the low notes, and high numbers for the high notes.  (I normally play tablature 11 - the Hohner Corona setup)

While I've transcribed all the notes correctly and I can get all the chords chromatically etc, I notice that when I play some chords, and scales the notes drop an octave when I don't want them to.  I assume that the numbers have something to do with it but don't know what is the correct procedure or if this is a problem with trying to make it a chromatic as well as diatonic.  Can someone help?

Try this - see attached.  Try shifting octaves if it's not right for you.
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Roland fr18 diatonic accordion - user group
« Reply #435 on: August 04, 2013, 01:55:10 PM »


I did it being in total ignorance of what the numbers next to the notes signify, e.g. Bb3, A6 etc 

The number indicates the octave. For example, middle C and A=440Hz are in the octave C4-B4. C3-B3 are an octave lower, and C5-B5 an octave higher. There is a table of values in this Wikipedia article.
Logged

ronaldas

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Roland fr18 diatonic accordion - user group
« Reply #436 on: August 05, 2013, 02:53:30 AM »

Thanks a lot for the replies

Looking at Daddy Long Les' tablature I now realise what I've done wrong - the octaves have to follow the chromatic scale pattern, starting on C for each octave.



Logged

MarkW

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Roland fr18 diatonic accordion - user group
« Reply #437 on: August 16, 2013, 07:40:00 AM »

Now here's an interesting question! I play 3 row melodeon but have had to stop as it is aggravating the osteo arthritis I have in my left shoulder. :'(  I need something much lighter to play and I'm wondering whether an FR-18 with the bellows resistance adjusted to the minimum might be the answer? I live in Indonesia so there is no opportunity to pick one up and try it. Must be somebody else somewhere with some experience of this problem - anybody?
Logged

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Roland fr18 diatonic accordion - user group
« Reply #438 on: August 16, 2013, 08:21:36 AM »

I don't think this is the instrument for you. A touch on the heavy side if you have a dodgy shoulder. I still found out that the bellows can be hard work especially as a hard push or pull are needed to emphasise some types of music. Playing it in the chromatic modes might be easier, but you might just as well get a small melodeon that does that, at a lot less money.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

MarkW

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Roland fr18 diatonic accordion - user group
« Reply #439 on: August 19, 2013, 07:39:27 PM »

OK, thanks for the advice Ace. I have an old Benny which needs repair, so I'll get that fixed.
Logged
Pages: 1 ... 17 18 19 20 21 [22] 23 24 25 26 27 ... 35   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal