Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 18 19 20 21 22 [23] 24 25 26 27 28 ... 35   Go Down

Author Topic: Roland fr18 diatonic accordion - user group  (Read 265695 times)

0 Members and 1 Guest are viewing this topic.

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: Roland fr18 diatonic accordion - user group
« Reply #440 on: August 29, 2013, 09:32:16 PM »

Help please!  Could someone please tell me how to set up the FR18 as...
1.  ADG
2.  GCF
...standard Hohner type layout and basses.

Haven't had it out of the bag for months and the last two memory cells are playing up again (mine, not the Roland's ::))  ...and ...me brains has gone into Teflon mode :-[ 

Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Roland fr18 diatonic accordion - user group
« Reply #441 on: August 29, 2013, 11:00:19 PM »

Tablature 11 is the standard GCF layout.

1. Press the [TABLATURE] button (it lights).
2. Use the first row in the button keyboard to select the new tablature.

To change the key

1. Press the [KEY] button (it lights).
Press any of the 12 treble buttons in the first row to select the desired key. A for ADG).

See pages 31 and 32 of the manual for more details.

Howard
Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: Roland fr18 diatonic accordion - user group
« Reply #442 on: August 29, 2013, 11:02:13 PM »

Many thanks Howard!
Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK

Lenny O

  • New Starter
  • Offline Offline
  • Posts: 2
problem with roland fr18 v accordion
« Reply #443 on: September 30, 2013, 10:47:33 PM »

several in the first row are mute, this prevents me from changing key as well. Can anyone help
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Roland fr18 diatonic accordion - user group
« Reply #444 on: September 30, 2013, 11:10:36 PM »

Ummm - get a real melodeon?

Seriously - there are so many problems with the Roland MIDI melodeon that for me far outweigh any of the benefits as an instrument - and that's the key point - it's still got to be an instrument.

I had a completely pointless conversation with the resident Roland expert salesman at a Music Room stall one festival last year where I asked how the bellows could be calibrated to actually accurately determine whether the user was pushing or pulling at low pressures depending on the local atmospheric pressure ... after quite a lot of blustering - it was quite clear that their "expert" was no such thing (he was simply a car salesman selling boxes) ... and that the problem with the software could not be solved as there was no setting for that.  The external atmospheric pressure can swing between 925mB and 1055mB in the UK - and that is quite enough for the sensor in a MIDI box to think your pulling when you're pushing or vice versa ... for an instrument to be sold here where you can't calibrate it to solve that problem is absolutely impossible to work with as a musician.

I apologise in advance for hijacking your particular thread with this ... have you tried turning it off and on again?

Edit:  This has now been put in an all encompassing Roland thread so my response is possibly now more on topic!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

streb

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 100
Re: Roland fr18 diatonic accordion - user group
« Reply #445 on: September 30, 2013, 11:46:55 PM »

Are you serious? The Roland has no ambient pressure calibration? I solved this easily so surely they must have done too!

Steve
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Roland fr18 diatonic accordion - user group
« Reply #446 on: September 30, 2013, 11:50:28 PM »

Hi Steve  :D

As far as anyone from Roland has been able to tell me ... and I have really tried! No ...

But ... sell, sell, sell !!!!  That seems to be the party line!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #447 on: October 01, 2013, 03:11:47 AM »

Are you serious? The Roland has no ambient pressure calibration? I solved this easily so surely they must have done too!

Steve

From page 52 of the FR-18 User's Manual:

The bellows exhibits an erratic behavior:

If the bellows doesn't work as expected, causing notes to sound even while it is not moved, its sensors may need resetting.

To do so, switch off the FR-18 diatonic, then press and hold the [ORCH.BASS] and [TABLATURE/INC] buttons while switching the FR-18 diatonic back on. If this operation doesn't solve the problem, contact your Roland dealer.
Logged

Lenny O

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Roland fr18 diatonic accordion - user group
« Reply #448 on: October 01, 2013, 03:55:00 AM »

Thank you. I'll give it a try  Len O
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Roland fr18 diatonic accordion - user group
« Reply #449 on: October 01, 2013, 03:56:25 AM »

just to put those pressure measurement in more context, our 925 was in Perthshire in 1884, and the highest Google could find was a 1053.6 hPa recorded in Aberdeen in 1902. This might throw a very ;) slow waltz, but normal diurnal variation is the ±15 or so seen elsewhere.

I happen to live very near the old Bidston Proudman Lab, who also did world tides. These were measured using a series of largish tanks connecting to Liverpool Bay with small channels. Strikes me that a simple capsule sensor à la barograph, but with a pinpoint hole should still reflect minute by minute pressure change but would be self adjusting wrt atmospherics?  Engineering wise it seems facile, more a matter of what assumptions the software chap made ;) If he used absolutes … bit silly?
Logged
  _       _    _      _ 

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Roland fr18 diatonic accordion - user group
« Reply #450 on: October 01, 2013, 08:00:20 AM »

I realise that now this has been moved and I'm not a Roland user that this is miles off topic. But yes I did use the most extreme recorded atmospheric pressure in the UK to make the point. However with my Streb - which allows a constant leak much large than a pinhole still goes off during fairly normal weather changes and needs re-calibration.

All the Roland's I have tried have suffered this problem (instrument thinking it's being pushed when it's being pulled at low pressures or vice versa), but nobody selling them has ever been able to tell me how it could be fixed.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Roland fr18 diatonic accordion - user group
« Reply #451 on: October 01, 2013, 09:10:14 AM »

I don't think this is the instrument for you. A touch on the heavy side if you have a dodgy shoulder. I still found out that the bellows can be hard work especially as a hard push or pull are needed to emphasise some types of music. Playing it in the chromatic modes might be easier, but you might just as well get a small melodeon that does that, at a lot less money.

It's true. I sold mine because it was too heavy.  :'(
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Roland fr18 diatonic accordion - user group
« Reply #452 on: October 01, 2013, 09:26:13 AM »

i tried one "conversationally" at the Saltarelle stall in Quimper. 'fraid I found it heavy, playable though hard to control tone variation. So not for me either, apologies for blundering in here in the small hours this morning.

I can't cope with salesmen who don't know their own kit either … Though seisluneers post suggests the pressure issue is fixable.
Logged
  _       _    _      _ 

streb

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 100
Re: Roland fr18 diatonic accordion - user group
« Reply #453 on: October 01, 2013, 06:03:09 PM »

However with my Streb - which allows a constant leak much large than a pinhole still goes off during fairly normal weather changes and needs re-calibration.

Hi John  :D

Hmm, it should calibrate itself for pressure changes. I admit that it does drift out slightly but I am pretty sure this is due to temperature differences (cf. pitch drift on old analogue synths) and this is much harder to correct.

When developing the eMelodeon back in 2003 I took an uncompensated prototype rig up a local hill only 300' higher than my house and the pressure null point was way out, not just slightly adrift!

Steve
Logged

dunlustin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 127
Re: Roland fr18 diatonic accordion - user group
« Reply #454 on: October 01, 2013, 07:35:13 PM »

Question:
Given that 300' is about 10mb why would it not make sense to wait for the next high/low pressure system to come through?
That could easily give you 20-30 mb variation.
Logged

CANNadian

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Roland fr18 diatonic accordion - user group
« Reply #455 on: October 17, 2013, 08:09:28 PM »

Good day all.

I've had my FR-18 since January of this year, and I love it!!!

Trying my hand at programming new tablature layouts, particularly for jazz/swing (which is often in a 7th chord).  Would anyone happen to have already done this, and if so, might you share the layout for both left and right hands?  I am wasting a lot of time using the "trial and error" method.

Thanks!
Logged

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #456 on: January 04, 2014, 02:03:52 PM »

Hello Cannadian, welcome to the club. I say this, because the question you ask is what is covered most in the  preceding 23 pages of discussion. When you have read all that is written you will still be back on you own, experimenting. Most commonly the advice has been 'Read the handbook' which I endorse. Look at the keyboard layouts in the appendix and choose something familiar and away you go. Members tardiness in replying to your October post probably means you have had time to do that. How are you getting on? Take the technical bit slowly and enjoy the playing DaveW
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Roland fr18 diatonic accordion - user group
« Reply #457 on: January 30, 2014, 08:25:21 PM »

Help required, when altering the "bellows curve" (function + key 16) and selecting tab 1 the instrument sounds without bellows movement. I have zeroed the bellows and performed a factory reset as per the manual,  I have also upgraded the software to the latest version all to no avail. Roland assure me that this is normal and allows the instrument to be played without moving the bellows as some people prefer this !!!. When it was pointed out that bellows movement was required in order to access the "in" and "out" notes on a melodeon I was  told that this was how the designer had organised things, and to ask them. I am sure that when I first took delivery (last July) that I was able to select tab 1 and play as normal, ie no movement = no sound whatever curve selected. The unit is at present with Roland's but I feel I may well be facing a losing battle as it seems nobody actually plays at Roland. Any help or advice is welomed
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment

petey

  • New Starter
  • Offline Offline
  • Posts: 1
Re: Roland fr18 diatonic accordion - user group
« Reply #458 on: January 31, 2014, 11:56:18 AM »

My FR-18 is sometimes difficult to play because of the air button / air hole. The basic body is that of a piano accordion where, when the player reaches almost closed bellows or maximum out bellows, he just changes bellows direction. You can't always do that with a melodeon because the tune sometimes demands lots of in or lots of out notes.

On my Castagnari, the problem is solved by the air button, which gives the feeling of opening the end of the instrument, so that a touch is all is necessary to let in or out adequate air.

On a piano accordion, am I right in thinking that the air button is mainly for opening or closing the bellows when starting or stopping playing. In other words, the 'air-hole' needs to be larger. The adjustment just makes the FR-18 'leakier'.

Has anyone else had this problem?
Logged

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Roland fr18 diatonic accordion - user group
« Reply #459 on: February 05, 2014, 11:20:32 AM »

Hi Petey, I think like a lot of people you are thinking of the instrument as a melodeon, it is not, it is a "Roland" or even a "Roland Melodeon" and should not be look on as an extra melodeon. I think I am also guilty of the same idea if you look at my post reference bellows curve where I am beginning to think the software is a carry-over from their accordions as it appears that nobody at Roland actually plays the FR-18.

I would add that I also find the air button a total disaster and the best you can do is enjoy the Roland for what it is - a great deal of fun, and something different.
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment
Pages: 1 ... 18 19 20 21 22 [23] 24 25 26 27 28 ... 35   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal