Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 19 20 21 22 23 [24] 25 26 27 28 29 ... 35   Go Down

Author Topic: Roland fr18 diatonic accordion - user group  (Read 265374 times)

0 Members and 4 Guests are viewing this topic.

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #460 on: February 06, 2014, 06:36:13 PM »

when altering the "bellows curve" (function + key 16) and selecting tab 1 the instrument sounds without bellows movement......
Any help or advice is welcome

Hi Chris,

Sorry for the delay I've been busy and only just round to replicating what you have described and Yes, I can confirm that on that lowest setting, you can play the instrument without moving the bellows and yes, this is normal and Yes, before you ask, as a novelty, I have done so  :D

I have the air hole adjustment closed (turned clockwise as far as it will go) and use the next setting up for the Bellows Curve i.e. whilst the blue led is flashing rapidly and Tab 1 is lit continuous red, press the INC button once, now Tab 1 will flash slowly and Tab 2 will be continuous red.

On this setting, I honestly can't feel any difference regarding responsiveness and bellows movement to that of my 'normal' boxes.

This is my personal humble opinion and others may disagree  ;)

Enjoy!

Skipy
« Last Edit: February 14, 2014, 01:34:48 PM by Skipy »
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #461 on: February 06, 2014, 07:02:27 PM »

My FR-18 is sometimes difficult to play because of the air button / air hole. The basic body is that of a piano accordion where, when the player reaches almost closed bellows or maximum out bellows, he just changes bellows direction. You can't always do that with a melodeon because the tune sometimes demands lots of in or lots of out notes.

On my Castagnari, the problem is solved by the air button, which gives the feeling of opening the end of the instrument, so that a touch is all is necessary to let in or out adequate air.

On a piano accordion, am I right in thinking that the air button is mainly for opening or closing the bellows when starting or stopping playing. In other words, the 'air-hole' needs to be larger. The adjustment just makes the FR-18 'leakier'.



Has anyone else had this problem?

Hi Petey,

I'm not quite sure what you mean but I would suggest using the setting that I have described to Chris in the above post. As I've said to him, in my humble opinion, that setting replicates the feel of all my 'normal' boxes.

Many users have commented that they find the Air Button/Lever very difficult to use and Rees actually carried out a modification on his but again, on the described setting, with the air hole adjustment fully closed and with my wrist through the bass strap to the point where, if I were wearing a watch, it would just be touching the strap, I can honestly say that the Air Button/Lever feels the same as my other boxes.

Maybe it's the size of my paws or something but I've honestly never suffered any discomfort or difficulty.

I must admit that I haven't played the Roland for about a month as I've been playing with my new toy :D but up to a month ago, I was playing it at least twice a week, for two to three hours a session over many months, with no ill effects whatsoever.

I've just had a little play now and honestly, the 'feel' is almost the same as my new toy, I can't say the same for the 'melodeon sound' but Hey, that's another issue  ;)


Again, Enjoy!

Skipy

« Last Edit: February 07, 2014, 01:23:35 PM by Skipy »
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

First pilot

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Roland fr18 diatonic accordion - user group
« Reply #462 on: February 24, 2014, 05:41:28 PM »

Hello to all,
    I have not been successful in replacing Tablature 1 with an ADG keys assempled on Roland's tablature maker.  It says that copying was successful, but it did not effect after several attempts.  What have I failed to do?
Pilot
Logged

First pilot

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Roland fr18 diatonic accordion - user group
« Reply #463 on: February 24, 2014, 06:28:26 PM »

hello all Fr 18 players.
    Until I get help writing and installing the keys I prefer;  I use tablature 6 tuned as a two row where I get all the sharps and flats for my style of music.  It still adjusts all the sharps and flats in every key I select together with suitable bass automatically.  The 3rd. row is silent and is only function keys.  This permits me to play as I always do on a B/C Honer till I can discover how to gain all the benefits of the Roland.  I have no issues with the bellows and I am very pleased with the accordian.  I will appreciate all the help offered from you much more knowledgeable members of the group. I have found a wealth of information on this site.
 Thanks. . . .Pilot
Logged

summerstars

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 301
    • UK Surnames Genealogy Contact Site
Re: Roland fr18 diatonic accordion - user group
« Reply #464 on: February 24, 2014, 10:05:15 PM »

Tablature 11 should give you a standard ADG layout
Logged
Dino Binci D/G, Sandpiper 3v D/G, Sandpiper C/F, Hohner Bb/Eb, Pariselle 1 Row in D, Streb

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Roland fr18 diatonic accordion - user group
« Reply #465 on: February 25, 2014, 10:53:52 AM »

Hi Skipy, many thanks for your reply. I will give it a try and get back to you ASAP but living as I do in the Swamps of Chertsey and having had the "Chertsey Sausage" outside our home things have been passing me by. As an aside, do you know if FR18's float ?
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #466 on: February 28, 2014, 02:33:03 PM »

Tablature 11 should give you a standard ADG layout
Don't forget to select 'key' of A to obtain ADG when using tab 11, otherwise you will be playing in GCF, which is fine, until you meet a Morris man. Best wishes with the FR-18. DaveW
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

First pilot

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Roland fr18 diatonic accordion - user group
« Reply #467 on: March 01, 2014, 02:30:41 AM »

Thanks dave,
    That is very important info.
pilot
Logged

First pilot

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Roland fr18 diatonic accordion - user group
« Reply #468 on: March 01, 2014, 02:46:05 AM »

Hello Dave,
    Tablature 6 is a 2 row B C.  Select D and you should be in C D and so on for any key with sharps and flats like the B C.
Pilot
Logged

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Roland fr18 diatonic accordion - user group
« Reply #469 on: March 04, 2014, 03:49:48 PM »

Here's a clip of Mouchicos exploring the possibilities. I love his versatile hat !

http://youtu.be/hdRux6DrTVo
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Roland fr18 diatonic accordion - user group
« Reply #470 on: March 05, 2014, 04:32:58 PM »

Here's a clip of Mouchicos exploring the possibilities. I love his versatile hat !

http://youtu.be/hdRux6DrTVo

Saw this a couple of years ago. Apparently He's a clown who does charity work with children in Paris.
Extremely skilled and must also be in the pay of Roland. It was that video that made me buy one. Only
It became too heavy for me.  :'( but if that's your thing they are brilliant and so is he. ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #471 on: March 09, 2014, 06:05:25 PM »

    Tablature 6 is a 2 row B C.  Select D and you should be in C D and so on for any key with sharps and flats like the B C.
Yes, Tablature 6 is 2 row B C. The rows are a semitone apart, so that if you select 'key' and press button 3 to give key of D in the outside row (which is how all the tablatures are labelled) I am pretty sure you will have a DC# instrument, not a CD - those are the shiny silver things  (:)
DaveW
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

First pilot

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Roland fr18 diatonic accordion - user group
« Reply #472 on: March 11, 2014, 10:04:42 PM »

I find if I want a D on the inner row; I select C#.
Pilot
Logged

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #473 on: March 12, 2014, 06:50:08 PM »

I find if I want a D on the inner row; I select C#.
Pilot
sounds about right
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

First pilot

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Roland fr18 diatonic accordion - user group
« Reply #474 on: March 22, 2014, 12:30:43 AM »

I too have had buttons come off.  I am hesitant to use glue however as it may become necessary to remove them for some reason in the future.  I just tighten enough without damaging them.  Plastic is not my favourite material because it cracks easily.
Pilot
Logged

First pilot

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Roland fr18 diatonic accordion - user group
« Reply #475 on: March 25, 2014, 01:19:07 AM »

I have found a few faults in the Tablature maker software.  I changed Tab. 1 row 3 and copied it to Tab. 1.  It refused to accept the load with a message telling me it was the same set. .choose another set.  I use many different Cad. and CNC software and when I save they always ask if I wish to over-write the existing file. I choose "yes" and it is done.  Tablature software should be able to do the same since changing one or more key's in a set is frequently necessary due to errors.  I also turned off all the keys for Tab. 1 and it would not let me load that either.  Any comments?
Pilot
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #476 on: March 25, 2014, 06:41:56 AM »

It's pretty easy to just directly modify the tablature XML format files in a text editor, then do any fine tuning of the layouts in the Roland tab editor program. Particularly handy for duplicating the same tab with variations.
Logged

First pilot

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Roland fr18 diatonic accordion - user group
« Reply #477 on: March 26, 2014, 01:28:11 AM »

thanks for your reply Seisiuneer,
    I must have a bad copy of  Tablature maker, as it will not accept a re-load over a set like in Tablature 1.  I have made many attempts without success.
Pilot
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Roland fr18 diatonic accordion - user group
« Reply #478 on: March 26, 2014, 10:30:33 PM »

I must have a bad copy of Tablature maker......

Try completely uninstalling your current version of Tablature Maker, then download and install (or re-install) the latest version 1.01 from here

Are you also running the later system software version (1.04) for the Roland? If not, that is available as well.


« Last Edit: January 14, 2020, 04:15:56 PM by Skipy »
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!

First pilot

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Roland fr18 diatonic accordion - user group
« Reply #479 on: March 27, 2014, 04:35:11 PM »

Thanks Skippy,
It is the older software.  Your help is greatly appreciated!
Pilot
Logged
Pages: 1 ... 19 20 21 22 23 [24] 25 26 27 28 29 ... 35   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal