Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 20 21 22 23 24 [25] 26 27 28 29 30 ... 35   Go Down

Author Topic: Roland fr18 diatonic accordion - user group  (Read 265350 times)

0 Members and 5 Guests are viewing this topic.

vias

  • New Starter
  • Offline Offline
  • Posts: 2

Hello I am new to this forum, I have a Roland fr-18 for 3 years and I'm crazy because I want to make a tablatura ¨Hohner club model Erika¨ or ¨Hohner club 3 m¨ but I can not, can someone help? thanks


This is the acordion...
« Last Edit: April 04, 2014, 01:16:55 AM by vias »
Logged

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Roland fr18 diatonic accordion - user group
« Reply #481 on: April 04, 2014, 01:59:12 PM »

Hello,

I've attached a file RDKC1.XML.txt which has the tablature you want based on the standard tablature number 12 with modifications.
It's in the key of C so you will need to transpose to Bb (page 32 of the manual).
Take the .txt off the file name and put it on a USB memory stick then follow the instructions for Importing Tablature Sets on page 39 of the manual.

You can edit tablature sets or make you own using the Tablature Maker available at http://www.roland.com/support/article/?q=downloads&p=FR-18D

Mitch
« Last Edit: April 05, 2014, 10:46:11 AM by Howard Mitchell-Borts (Mitch) »
Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

vias

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Roland fr18 diatonic accordion - user group
« Reply #482 on: April 10, 2014, 12:38:27 AM »

Thanks Mitch!!
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Roland fr18 diatonic accordion - user group
« Reply #483 on: July 17, 2014, 10:01:06 AM »

Can I join this happy band of FR18 owners?  Got mine from Summerstars of this parish yesterday (thanks for that, Malcolm, great to meet you, and thanks for starting me off!), but I'm a digital newbie.

Malcolm very kindly set up my Saltarelle D/G/Acc layout on the FR18 for me, but I'm trying to repeat and extend this, so that I understand how it works.  Can I seek some guidance from you experts on a few basic points?:

1) To set up a new layout, it looks easiest for me to modify Tablature 7 using the downloadable software, but to do it in G/C/Acc.  Is that right?

2) I'm thinking of initially setting up the extended acc row as per my Tramontane.  This involves a fifth button repeat of the first button on both push and pull.  There's been a lot of discussion elsewhere about the merits of the acc row repeat system matching the 'out of syncness' of the other rows in terms of repeats.  I think I'll probably stick with what I know, but has anyone any comments?

3)  I want to set up the basses to make a fairly easy replacement of my bass buttons 13 and 14, using the third row.  I think I know what to do about the F#/C# replacement (in D/G/Acc box speak, that is), using the middle two buttons of the third bass row as F#/F#mi push and C#/C#ma pull.  This allows me to continue with my existing alternating bass technique when playing a tune in D.   What's the consensus for the best use of the other four buttons on the third bass row, is there any agreement?
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Roland fr18 diatonic accordion - user group
« Reply #484 on: July 21, 2014, 03:43:39 PM »

A few days further into the learning curve, and most of my questions are probably now superseded by experience, but one or two new ones have emerged -

Why is the sound from the headphones socket so weird, and so different from the other two sockets?  It sometimes sounds like it has a strong high frequency stereo panning effect going on.  This seemed to disappear when I did a factory reset, but it seems to have re-emerged.   What exactly do the other two output sockets give you?

Ploughing through the above 25 pages has been very helpful - thanks particularly to Howard for explaining how to preset the tablature and key effectively.  I will probably almost always want to use the same tablature, so this has made it much easier.

I'm scratching my head a bit about how to save settings effectively to the stick, so that if I inadvertently change something I don't want, and don't know what I've done wrong, I can revert to the changes I've already done.  What's the best advice here?
Logged

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Roland fr18 diatonic accordion - user group
« Reply #485 on: July 25, 2014, 10:08:04 PM »

Hi Chris,

I'm away from home in America at the moment with no access to any melodeons including the Roland.

A general answer is, set it up as you want it then save those settings to a memory stick. You can then make other changes and revert to the saved version if everything goes wrong.

I'm sure others will jump in but I'll look at it again next week when I'm back in the UK.

Mitch (Howard Mitchell)

Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Roland fr18 diatonic accordion - user group
« Reply #486 on: July 28, 2014, 10:07:42 AM »

I'm getting into re-setting parameters now, particularly reverb and chorus (why exactly are they defaulted as being on?  Surely you wouldn't do that on any other instrument?  OK, maybe Roland wanted it to have a full sound on its own, but if you're playing with others through a mixer the sound engineer is going to get pretty fed up with you for having those preset on, I would have thought!)

I'm confused however as to how changing these parameters affects other 'patches', and I seem to be having problems turning off the flashing blue light after changing the parameter, which seems to be causing me to then make unintended changes.  I think there's something I don't understand about this, can anyone else help in my problem?
Logged

summerstars

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 301
    • UK Surnames Genealogy Contact Site
Re: Roland fr18 diatonic accordion - user group
« Reply #487 on: July 28, 2014, 12:26:47 PM »

From memory Chris,  you need to press the flashing blue switch again to take you out of settings mode.  I can't test this obviously .......   but I think the routine is

1. press and hold the settings button until it flashes - then choose the parameter button (on the main keyboard) - set your parameters using the 4 rocker switches,  then press the settings blue button to finish.

Is it possible that you haven't yet mastered the short and long hold presses on the settings (First coloured) button?

Malcolm
Logged
Dino Binci D/G, Sandpiper 3v D/G, Sandpiper C/F, Hohner Bb/Eb, Pariselle 1 Row in D, Streb

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Roland fr18 diatonic accordion - user group
« Reply #488 on: July 28, 2014, 12:46:34 PM »

Cheers Malcolm, yes that may be the reason, I don't know.  The parameters sometimes need to be set using the inc and dec buttons as well, don't they, to get intermediate settings?  I seem to be able to come out of editing OK, but for example I managed to somehow remove one of the voices from all the different accordion sounds earlier, so they were all just playing the low reeds -  everything seemed to go down an octave.  I have no idea how I managed to get out of this, but somehow it all suddenly seemed to work again properly!
Logged

summerstars

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 301
    • UK Surnames Genealogy Contact Site
Re: Roland fr18 diatonic accordion - user group
« Reply #489 on: July 28, 2014, 01:24:09 PM »

octave change   -   single press of the select button then while holding the select button pressing (just a touch is all that is needed) the first or second butoon lowers or raises by one octave

Malcolm

Logged
Dino Binci D/G, Sandpiper 3v D/G, Sandpiper C/F, Hohner Bb/Eb, Pariselle 1 Row in D, Streb

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Roland fr18 diatonic accordion - user group
« Reply #490 on: August 03, 2014, 04:23:18 PM »

Huge breakthrough with the playability and responsiveness of my FR-18 last night.

Previously, I had an issue with cracks on the bass side causing air leaks, where the bass strap attaches to the internal plastic of the case.  Roland replaced the left main case no charge even after it was out of warranty.

Last night, I started noticing air sounds again from where they shouldn't be, sounded this time like it was on the right side.

So, I carefully opened up the right side (there are two screws on each side of the panel you need to remove), and discovered the air sensor port and tube.

I've never liked that you can't really get a very tight bellows response from the FR-18 as I get from my Saltarelle even with the left side air valve as closed as it can go.

On the right side, there is a port into the bellows that has a small cover plate held on with two screws and a rubber tube that goes into a small port for the pressure sensor. The rest of the port has two foam discs to restrict air flow. Apparently, something had shifted with the foam discs and was causing more air than usual to go through the port, nothing was cracked or broken.

To further increase the air flow restriction, I cut an additional disc of high density foam and stacked it on top of the two already there, then reattached the cover plate.

Now the instrument plays much more like my Saltrarelle, is much tighter in response and can do reversals much faster. Feels really nice. Takes about 10 minutes to make the modification, is completely non-destructive and easily reversible.

Not sure if this would void your warranty so try at your own risk, but for me it changed my mind about getting rid of my FR-18.

Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Roland fr18 diatonic accordion - user group
« Reply #491 on: August 03, 2014, 07:02:36 PM »

Thanks Malcolm, that looks like the answer.  Easy to reverse!

Can anyone suggest how best to alter the character of the sound?   It feels to me as if a graphic equaliser would be able to make the box sound more like the real thing - at the moment all the RH sounds seem too 'tinny' to me.  I've removed the internal reverb and chorus effects, which seems to help a lot, but I'd like to modify the whole sound a bit - some more middle treble and probably low treble, and cut some of the really glassy high sounds.  Should I be looking at importing new sounds, or perhaps using the MIDI output somehow?
Logged

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Roland fr18 diatonic accordion - user group
« Reply #492 on: August 04, 2014, 02:55:58 PM »

Huge breakthrough with the playability and responsiveness of my FR-18 last night.

...
Last night, I started noticing air sounds again from where they shouldn't be, sounded this time like it was on the right side.

...

On the right side, there is a port into the bellows that has a small cover plate held on with two screws and a rubber tube that goes into a small port for the pressure sensor. The rest of the port has two foam discs to restrict air flow. Apparently, something had shifted with the foam discs and was causing more air than usual to go through the port, nothing was cracked or broken.

To further increase the air flow restriction, I cut an additional disc of high density foam and stacked it on top of the two already there, then reattached the cover plate.

...

Thanks for this.  I'd also noted an increase in air flow somewhere on the right hand side. 
My solution was to put a piece of insulation tape on the inside of the perforated cover plate.

I get a much quicker response to below direction changes now.

Mitch
Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Roland fr18 diatonic accordion - user group
« Reply #493 on: August 04, 2014, 03:18:36 PM »

...

I'm scratching my head a bit about how to save settings effectively to the stick, so that if I inadvertently change something I don't want, and don't know what I've done wrong, I can revert to the changes I've already done.  What's the best advice here?

Chris,

You can save User Program Sets to a memory stick. The files are U01.USD, U02.USD, U03.USD and U04.USD
These are the settings you may have saved in User Program 1,2,3 and 4 which could be settings before you edit something to give you somewhere to go back to without having to reset the whole instrument.  Section 10 of the manual covers user programs and section 11 saving and loading from a of a memory stick.


Confusingly, User Sets (The files are S01.STD, S02.STD, S03.STD and S04.STD) can be loaded into the USER family from a memory stick but you have to buy additional sets to do this.

Mitch




Section 11 of the manual tells you how to save and load User Program Sets and User Sets.



Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Roland fr18 diatonic accordion - user group
« Reply #494 on: August 04, 2014, 04:36:17 PM »

Thanks Howard, I think my problem is probably more to do with understanding what the terms they use actually mean, rather than the procedure for saving things.  I seem to have got a workable set of sounds, but I don't really know what to do with them to, how I got there, or exactly what I would be saving if I did so.

So, in section 10 it describes the 'set' of things you can save (both to a 'User Program' and to a USB stick), but I'm not really sure what it is you are saving in each file - is it just the 'set' of parameters for that particular button (1-4, with inc and dec variations for each parameter?), or does it cover all the 4 buttons, for each of the saved files?

I think that where I'm stuck is in trying to understand how the whole programming philosophy actually works.  I probably haven't understood an early point in the manual.  I think it's something to do with the multiple functionality of the five main buttons, maybe?
Logged

sperretta

  • New Starter
  • Offline Offline
  • Posts: 1
Re: Roland fr18 diatonic accordion - user group
« Reply #495 on: August 25, 2014, 11:08:54 PM »

Hey guys,

I've had an FR-18 for a few months now and after struggling with making quick key-changes and using my own sounds, I've come up with a solution and decided to make it into a bit of a walkthrough/project. If you want to read about it, check out the first part at http://www.lazyengineer.com/roland-fr-18-part-1-midi-software/

Hope it's okay to post this here!

Simon
Logged

Suppards

  • Good talker
  • **
  • Offline Offline
  • Posts: 84
  • Old enough to know better. Daft enough not to care
Re: Roland fr18 diatonic accordion - user group
« Reply #496 on: August 31, 2014, 06:21:21 AM »

Just saying "hello" to you all.  I've just bought an FR-18. I love it - so much fun and a change from cranking away on my D/G box. 

Next job is to replicate the 4th button start layout of my Dino BP III - that should amuse me for a few weeks!   And you're all spot-on - the handbook is hard work but by golly I know how the straps are fitted!
« Last Edit: August 31, 2014, 08:16:48 PM by Suppards »
Logged
Steve
North Yorkshire, UK

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: Roland fr18 diatonic accordion - user group
« Reply #497 on: September 03, 2014, 06:03:03 PM »

Just saying "hello" to you all.  I've just bought an FR-18. I love it - so much fun

Welcome to the Happy Band of travellers (in space and time?) - Now there's a thought - is anyone  up for playing the Doctor Who theme on an FR-18, choose your own voice.  (:)

DaveW
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

Suppards

  • Good talker
  • **
  • Offline Offline
  • Posts: 84
  • Old enough to know better. Daft enough not to care
Re: Roland fr18 diatonic accordion - user group
« Reply #498 on: September 05, 2014, 04:20:10 AM »

I would say banjo but maybe a rule for this game should be that you can only choose a voice you can actually find?!   :P
Logged
Steve
North Yorkshire, UK

Suppards

  • Good talker
  • **
  • Offline Offline
  • Posts: 84
  • Old enough to know better. Daft enough not to care
Re: Roland fr18 diatonic accordion - user group
« Reply #499 on: September 10, 2014, 06:19:04 PM »

Getting to grips with the FR-18, the first thing I've found is that the keyboard functions diagram on Page 42 of the manual is a bit lacking in size and detail. It is also always in the wrong place whenever you are using the pages on parameters.    As my first "fix" I've produced a diagram of the keyboard (seen from the player's viewpoint) which clearly shows functions on their individual keys.

As this might be of some use to others, Clive has kindly attached it to this thread - just scroll down a bit.
« Last Edit: September 11, 2014, 04:56:26 PM by Suppards »
Logged
Steve
North Yorkshire, UK
Pages: 1 ... 20 21 22 23 24 [25] 26 27 28 29 30 ... 35   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal