Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Split in bellows  (Read 2256 times)

0 Members and 1 Guest are viewing this topic.

Flashman

  • Member
  • *
  • Offline Offline
  • Posts: 15
Split in bellows
« on: July 01, 2011, 03:06:49 AM »

The bellows on my old hohner has a split on one of the folds if I get some bellows tape is it easy to easily repair this from the inside.  Its on the second or third fold from the fingerboard side.

Thanks in advance

Dazz
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Split in bellows
« Reply #1 on: July 01, 2011, 08:11:31 AM »

If it is split right through the card you will need something stronger than bellows tape to reinforce it from inside as well as replacing tape on the outside.  A strip cut from a cereal box, folded lengthwise and glued into the damaged fold with pva will provide plenty of strength.  
« Last Edit: July 01, 2011, 08:13:33 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Split in bellows
« Reply #2 on: July 01, 2011, 08:31:08 AM »


.. did you used to be on Blue Peter, Theo?  ::)

No, but I did watch Blue Peter.  ;)
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Split in bellows
« Reply #3 on: July 01, 2011, 10:34:49 AM »

I know a guy who had a wire coathanger taped inside his bellows to stop it imploding!  Of course, he had a ribbon to hold the box closed as the straps no longer reached...  Eventually (about two years) he had new bellows made.

I was wondering whether it was feasible to replace the leather diamonds on otherwise OK bellows?

Rob.
Logged

MartinW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 202
Re: Split in bellows
« Reply #4 on: July 03, 2011, 08:35:06 PM »

If it is split right through the card you will need something stronger than bellows tape to reinforce it from inside as well as replacing tape on the outside.  A strip cut from a cereal box, folded lengthwise and glued into the damaged fold with pva will provide plenty of strength.

.. did you used to be on Blue Peter, Theo?  ::)

A complete digression, but I have played melodeon on Blue Peter.

Martin
Logged

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Split in bellows
« Reply #5 on: July 05, 2011, 12:01:17 PM »

I know a guy who had a wire coathanger taped inside his bellows to stop it imploding!  Of course, he had a ribbon to hold the box closed as the straps no longer reached...  Eventually (about two years) he had new bellows made.

I was wondering whether it was feasible to replace the leather diamonds on otherwise OK bellows?

Rob.

Now this job takes a little patience as it can be a little fiddly.
Start off by stretching the bellows by using two timber diagonal braces within the bellows, try to get them to rest up against the frames.

Now you have to try and peel back the bellows tape without tearing it on the offending corners.

 I have a tool that I have made up so that I can slightly lift the metal corner,  sometimes you can take the corner right off without tearing the bellows board or fabric.

Then try and lift and fold back the bellows papers until all the diamond is exposed, some of the bellows makers used hide glue so with a bit of luck you might be able to lift them off without using moisture, but if all fails use a little water.

Replace the diamond with hide or rabbit skin glue, if you do not have that then PVA will service.

When it comes to gluing on the corner I use PVA Craft Glue, but contact adhesive will again service here.

Crimp the corner up with a parallel jawed pliers or use a small bull nose cutter (not to hard) as second best.

Best of luck
Peter
 

Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Flashman

  • Member
  • *
  • Offline Offline
  • Posts: 15
Re: Split in bellows
« Reply #6 on: July 07, 2011, 02:26:34 AM »

Cheers for the advice.  Took the bellows off and had a look on the inside found that the split is only on the coloured card and does not go all the way through if you know what I mean.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal