Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Erica keyboard screw size?  (Read 2899 times)

0 Members and 1 Guest are viewing this topic.

RusselS

  • Member
  • *
  • Offline Offline
  • Posts: 16
Hohner Erica keyboard screw size?
« on: July 02, 2011, 01:04:03 AM »

Hi,
I've just received a new Hohner 2 row plastic keyboard housing and it shipped with the wrong screws. Does anyone know the right size and thread of the screws? The ones that shipped measure approx. 3.2 mm x 40 mm.

Thanks. 
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Hohner Erica keyboard screw size?
« Reply #1 on: July 02, 2011, 01:56:05 AM »

I had the same problem once, I think the screws are metric and I couldn't get any of the machine screws at the hardware store to fit. So.. not too much help, but if you're in the US, try Ace hardware for a match as my local Lowe's and Home Depot were useless in my search for the right part.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Erica keyboard screw size?
« Reply #2 on: July 02, 2011, 08:44:46 AM »

They are metric, I'll check and post the sizes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner Erica keyboard screw size?
« Reply #3 on: July 02, 2011, 09:00:21 AM »

They are M3 bolts, I have the devil's own job sourcing M3s that were long enough in the end bought a pack of these:

http://www.screwfix.com/p/rawlplug-spring-toggle-m3-x-50mm-pack-of-20/44319

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Hohner Erica keyboard screw size?
« Reply #4 on: July 02, 2011, 10:12:27 AM »

You may well find these at your local auto shop, Auto Care, Halfords, etc, they only seem to stock metric these days. mory
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner Erica keyboard screw size?
« Reply #5 on: July 02, 2011, 11:01:12 AM »

You may well find these at your local auto shop, Auto Care, Halfords, etc, they only seem to stock metric these days. mory

It was the length that was the problem, plenty of short M3s but you need them to be 39mm long.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Hohner Erica keyboard screw size?
« Reply #6 on: July 02, 2011, 12:55:18 PM »

On the plus side, when you've sourced some replacements they will ubdoubtedly be of better quality than the Chinese monkey metal in a new Hohner!  They seem to use hot melt glue to seal them in and the head stripped out with very little force when I tried to take my keyboard off.

Note to self - buy new screws...

Rob.
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Hohner Erica keyboard screw size?
« Reply #7 on: July 02, 2011, 03:21:59 PM »

I'm sure Hohner could provide you with the correct bolts after 6 weeks, (not including the month taken to reply to your email), at something like €5 each. ;D

Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Hohner Erica keyboard screw size?
« Reply #8 on: July 02, 2011, 04:40:50 PM »

On the plus side, when you've sourced some replacements they will ubdoubtedly be of better quality than the Chinese monkey metal in a new Hohner!  They seem to use hot melt glue to seal them in and the head stripped out with very little force when I tried to take my keyboard off.

Note to self - buy new screws...

Rob.

Yes, and also take care when tightening them. I came into my metric system conundrum after twisting the head off the keyboard screw, with very little effort at all, leaving the rest still threaded in the socket. If the screw had not been so long I don't know how I could have removed it.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner Erica keyboard screw size?
« Reply #9 on: July 02, 2011, 04:55:37 PM »

I am glad it was not just my gorilla like grip that snapped these bolts  ;D   For some reason the originals appear to by slightly waisted just past the head and that is were they snap.

Robbie

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Erica keyboard screw size?
« Reply #10 on: July 02, 2011, 11:27:42 PM »

One shot fixings. ;D
Logged

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Hohner Erica keyboard screw size?
« Reply #11 on: July 03, 2011, 11:19:24 AM »

Hi,
I've just received a new Hohner 2 row plastic keyboard housing and it shipped with the wrong screws. Does anyone know the right size and thread of the screws? The ones that shipped measure approx. 3.2 mm x 40 mm.

Thanks. 

These are the screws I use   http://www.ebay.co.uk/itm/20-NEW-PAN-HEAD-MACHINE-SCREWS-/390169250462?pt=UK_DIY_Material_Nails_Fixing_MJ&var=&hash=item99ab2e955d#ht_518wt_905

The size is M3 x 40mm.  Just select the size from the drop down menu.

Martyn
www.melodeonrepairs.co.uk
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal