Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Coil spring hook?  (Read 2959 times)

0 Members and 1 Guest are viewing this topic.

RusselS

  • Member
  • *
  • Offline Offline
  • Posts: 16
Coil spring hook?
« on: July 04, 2011, 11:17:00 AM »

I'm interested in a hook/tool for disconnecting/reconnecting coil springs easily and is there a simple method for this? As I need to remove the entire keyboard mechanism (which is entirely coil sprung) to do other work a handy hook would make the job much easier.

Thanks.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Coil spring hook?
« Reply #1 on: July 04, 2011, 11:43:53 AM »

I find a useful tool for this can be made from a screwdriver with a V notch filed in the end of the blade.  Mine is made from 2mm flat bladed screwdriver.  Of course it depends on what kind of keyboard you are working on.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Coil spring hook?
« Reply #2 on: July 04, 2011, 12:03:28 PM »

When I was a young graduate engineer, assigned to the field service division for experience (of card punches, sorters, collators, accounting machines etc) I had the very tool in my kit, called a spring hook. I can't find a similar device listed anywhere, but it was a tool about 7" long with a flattened, notched end, like Theo describes, while the other end had a small hook, like the second one from the left here. Very useful for removing and replacing coil springs. It occurs to me that one could perhaps be fashioned out of a metal crochet hook.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Coil spring hook?
« Reply #3 on: July 04, 2011, 12:42:35 PM »

A crochet hook also works well.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Coil spring hook?
« Reply #4 on: July 04, 2011, 02:55:36 PM »

A good friend gave me a small, metal crochet hook for Christmas, as I was going through quite a few springs on the Pokerwork.  Saves having a sore thumb!

Rob.
Logged

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Coil spring hook?
« Reply #5 on: July 04, 2011, 10:02:13 PM »

I'm interested in a hook/tool for disconnecting/reconnecting coil springs easily and is there a simple method for this? As I need to remove the entire keyboard mechanism (which is entirely coil sprung) to do other work a handy hook would make the job much easier.

Thanks.


You'll find a good selection of spring hooks in places like this: ELFA click Tools - then click Special / Miscellaneous Tools - then go to page 2, and you'll find spring hooks. I use spring hook art. 1-5475/185 and 1-5430. I can recommend springhook 1-5475/185.

Logged
Sweden, Skåne

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Coil spring hook?
« Reply #6 on: July 04, 2011, 10:12:45 PM »

I don't know where you are, but here in Oxford there's an antiques/flea market every Thursday and there's a stall that always has a seemingly endless supply of second hand crochet hooks for 50p to £1 each.  If there's something similar near you then you should have a look for what's available - choose a nice small one with a bend (or bend the shaft yourself) - I find the open hooks easier to use than the ones with a hinged closing part.

Cheers
Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Coil spring hook?
« Reply #7 on: July 05, 2011, 09:58:19 AM »

I just use a piece of bent piano wire as recommended by Emmanuel Pariselle.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Coil spring hook?
« Reply #8 on: July 17, 2011, 12:33:27 AM »

I have a spring hook made by MusicMedic in the US. I had it years ago for doing woodwind stuff. It's quite a nice thing, but as far as I can tell, a crochet hook or bit of bent wire would do just as well.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Coil spring hook?
« Reply #9 on: July 17, 2011, 12:20:56 PM »

Another thing worth looking out for is someone selling used dentists tools.  I know it sounds weird, but once the surface finish is marred they are discarded and I have picked up small scrapers, etc at a boat jumble.  Another possibility is to slip an orange stick into a hypodermic syringe, flatten the needle and bend to a suitable shape - or is that considered non-PC nowadays?

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Coil spring hook?
« Reply #10 on: July 17, 2011, 12:23:56 PM »

Another possibility is to slip an orange stick into a hypodermic syringe

This is OK as long as you don't share with others

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Coil spring hook?
« Reply #11 on: July 17, 2011, 02:19:04 PM »

Another thing worth looking out for is someone selling used dentists tools. 

Some tool shops sell things that are shaped like dentists tools but aren't.  They have various shaped spikes, hooks and probes and can easily be bent into whatever shape you need.   I have several that I use all the time.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal