Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Burning off a soundboard  (Read 3217 times)

0 Members and 1 Guest are viewing this topic.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Burning off a soundboard
« on: July 05, 2011, 05:06:15 PM »

See http://www.youtube.com/watch?v=f1vgRiPg8vQ (from Olav Bergflodt's facebook).  I see EeJay's been there already.  Warning - fast forward may be appropriate but it's interesting. Olav comments: Nettopp. Forresten: Tidligere brukte man som regel drill og boret gjennom flere plater pÃ¥ en gang, noe som muligens gikk enda kjappere enn med min laser-metode. Problemet er bare det at man i de fleste tilfeller endte opp med runde hull og mye tapt klang...  ???
Logged
  _       _    _      _ 

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Burning off a soundboard
« Reply #1 on: July 05, 2011, 11:04:11 PM »

It's awesome.  I offered to trade a used wife for one, and depending on the day, may throw in a couple kids.  No takers yet.

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Burning off a soundboard
« Reply #2 on: July 06, 2011, 09:36:55 AM »

Olav comments: Nettopp. Forresten: Tidligere brukte man som regel drill og boret gjennom flere plater pÃ¥ en gang, noe som muligens gikk enda kjappere enn med min laser-metode. Problemet er bare det at man i de fleste tilfeller endte opp med runde hull og mye tapt klang...  ???
In 'English':
Exactly. did: formerly used mon usually drill and drilled through several discs at a time, something which possibly went even kjappere than with my laser-method. The only problem is that there is in most cases ended up with round hole, and much lost sound
Anyone tried 3d-printing yet?

Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Burning off a soundboard
« Reply #3 on: July 06, 2011, 01:25:06 PM »

 I wonder how many melodeons you have to sell to pay for one of those.  ???
Logged

michik

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 412
Re: Burning off a soundboard
« Reply #4 on: July 06, 2011, 02:10:19 PM »

I wonder how many melodeons you have to sell to pay for one of those.  ???

Only one ...  

I've checked the internet .. they are available from $2000 upwards

Professional devices 10.000 upwards

« Last Edit: July 06, 2011, 02:17:35 PM by michik »
Logged
Michael Knapp ~ Vienna ~ Austria
Playing on "Parigi Giovani" G/C (made by Bompezzo) - My recordings: http://www.onmvoice.com/mknapp

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Burning off a soundboard
« Reply #5 on: July 06, 2011, 09:34:43 PM »

Yes, only one....if it was a genuine Old Grey Paolo owned by a famous player. ;D

There a quite a few options that you need to consider to suit your needs, it gets quite complicated and there's also some semi-hidden costs to get it up and running properly. I've had a proper written quotation for a similar machine to the one shown in the video and with tax, delivery, installation, extraction, etc it's more like £14000/€15500.
« Last Edit: July 06, 2011, 09:41:59 PM by Andy Simpson »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Burning off a soundboard
« Reply #6 on: July 06, 2011, 10:55:43 PM »

I wonder how many melodeons you have to sell to pay for one of those.  ???

Only one ...  

I've checked the internet .. they are available from $2000 upwards

The ones I priced were $20,000, like Olav has.  A bit steep.

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Burning off a soundboard
« Reply #7 on: July 07, 2011, 09:17:03 AM »

Or you can build your own. Unless you need to do a lot of cutting it's cheaper to take your design to a laser cutting service.
Logged

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: Burning off a soundboard
« Reply #8 on: July 07, 2011, 02:31:31 PM »

Reminiscent of the old vector pen plotters I you'st to repair many moons ago, just substitute laser for pen  :o
Logged

michik

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 412
Re: Burning off a soundboard
« Reply #9 on: July 07, 2011, 03:04:23 PM »

Reminiscent of the old vector pen plotters I you'st to repair many moons ago, just substitute laser for pen  :o

That's an idea ... I have an old A3 pen plotter at home :-)
Logged
Michael Knapp ~ Vienna ~ Austria
Playing on "Parigi Giovani" G/C (made by Bompezzo) - My recordings: http://www.onmvoice.com/mknapp

upmine3

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 135
    • Facebook
Re: Burning off a soundboard
« Reply #10 on: July 10, 2011, 05:50:41 PM »

Just curious in the video it cut what seemed 2 identical sounboards side by side. I wonder if they were rigid enough to do 2 different melodeons or was he going to glue them together for one solid piece?
Logged
Castagnari Kriss III B/C -  Hohner Double Ray De-Lux B/C Pokerwork (presswood) Pokerwork (Brown)

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Burning off a soundboard
« Reply #11 on: July 10, 2011, 07:32:42 PM »

£15,000 to £20,000 will get you one you can use for this sort of work but there's a fair amount of consumables etc to add to that (plus a lot of fun on CorelDraw getting the planning dead right)  They've come down a lot in the time since I first priced one up, then it was £50k plus for similar performance.

As a comparator, assuming that those are one-eighth ply that would take me about an hour to cut BUT as I stack cut I would be cutting eight at a time, it would take 75pence worth of blades and the machine only cost £500.  The downside being I couldn't just leave it to run and get on with another job whilst it was cutting.

Steve
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal