Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Repitching to D/G.  (Read 5663 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Repitching to D/G.
« on: July 05, 2011, 09:27:39 PM »

I've been reading in the archives that some get their instruments retuned to different keys. I'd like to plan for purchasing a used melodeon and repitching to D/G since it's so difficult to find such instruments already in D/G.

What are the easiest original keys to start from? Does anyone have a plan already worked out to tune the reeds from the original pitch to D/G with the minimum amount of shift for each reed?

Thanks
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Repitching to D/G.
« Reply #1 on: July 05, 2011, 09:45:26 PM »

I'm not certain that I understand the question, because I thought that D/G (ie "D" on the outside row and "G" on the inside one) was the most common tuning. Am I missing something?  :|bl
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Repitching to D/G.
« Reply #2 on: July 05, 2011, 10:10:46 PM »

I should have been more clear, I see.

D/G is the most common tuning in the UK and is here in the US for Morris dance tunes. I'm not sure when it became the prevalent tuning in the UK but I remember reading recently that it's the latest of the tuning arrangements. The least expensive instruments that usually come up on Ebay in the US are older, in need of work, and usually in anything other than D/G. For example, I see many instruments in G/C, A/D, Bb/Eb, C/F and so forth. The instruments are very rarely in D/G and when they are, are several hundred dollars in price.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Repitching to D/G.
« Reply #3 on: July 06, 2011, 12:44:37 AM »

I should have been more clear, I see.

D/G is the most common tuning in the UK and is here in the US for Morris dance tunes. I'm not sure when it became the prevalent tuning in the UK but I remember reading recently that it's the latest of the tuning arrangements. The least expensive instruments that usually come up on Ebay in the US are older, in need of work, and usually in anything other than D/G. For example, I see many instruments in G/C, A/D, Bb/Eb, C/F and so forth. The instruments are very rarely in D/G and when they are, are several hundred dollars in price.

Here in Australia there was plenty of C/F's in the market place as it looked like they were popular here before the Folk revival D/G.

These C/F boxes are very easy to turn to D/G, but with a little patience, and good (or not so good like me) silver soldering skills.

Firstly you start by moving the reeds down a cavity, so they have now become to high within that cavity for D/G, you might have to take a little timber off the top of the reed cavity for the reeds and valves to clear.

You now have to drop a small amount of silver solder on to the tip to take the pitch down, you will normally take the pitch down to far at this point and then you can file the silver solder back up to the desired pitch.

At the very top end you will need to get your hands on the right reeds, but this is far cheaper than getting a new set of reeds.

Using this method you do not re pitch the original steel of the reed, and you can always take it back to the original pitch just by taking off the solder.
I have used this method quite a lot, and I also have taken down other keys in pitch (D/D# down to C#/D for instance) using the silver solder trick, I tend to use this method rather than file the reeds down in pitch as the box can then be taken back to its original pitch without any damage to the reeds.

Take it easy
Peter

Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

nemethmik

  • Guest
Re: Repitching to D/G.
« Reply #4 on: July 22, 2011, 02:17:06 PM »

Firstly you start by moving the reeds down a cavity, ...
you might have to take a little timber off the top of the reed cavity for the reeds and valves to clear.
You now have to drop a small amount of silver solder on to the tip to take the pitch down...
then you can file the silver solder back up to the desired pitch.
At the very top end you will need to get your hands on the right reeds, but this is far cheaper than getting a new set of reeds.
Peter, this sounds terribly simple. I wonder whether regular (zinc) solder would work either?
Thank You!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repitching to D/G.
« Reply #5 on: July 22, 2011, 02:45:48 PM »

Soft solder (lead+tin - not zinc) is IMHO much more suitable than silver solder and the high tin type used for electrical work has a melting temperature of around 180C.   Silver solder that I used to use in making jewelry needs very high temperatures 600C to 800C. I would not want to expose reeds too that as it would destroy their temper.

I think we may be getting mixed up with terminology here.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

nemethmik

  • Guest
Re: Repitching to D/G.
« Reply #6 on: July 22, 2011, 02:56:49 PM »

Soft solder (lead+tin - not zinc) is IMHO much more suitable than silver solder and the high tin type used for electrical work has a melting temperature of around 180C.   Silver solder that I used to use in making jewelry needs very high temperatures 600C to 800C. I would not want to expose reeds too that as it would destroy their temper.
Thank You, Theo, for the correction and clarification. I had had no clue what is silver soldering and I watched a couple of youtube videos about silver soldering, and I was frightened by the process of using a torch. Now I am relieved.
« Last Edit: July 22, 2011, 05:14:21 PM by Miklos Nemeth »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repitching to D/G.
« Reply #7 on: July 22, 2011, 03:44:32 PM »

MY approach to re-pitching is different.

I don't like weighting reeds with solder, except for the very lowest reeds because it can compromise the reed reponse.  I prefer to move the reeds round to new positions to get the reeds to positions where they need the minimum amount of pitch change.   Depending on the original keys a small number will need no change at all, quite a number have just one tongue shifted, and some a bit more.  It's a process I've refined over several years and I don't know how many boxes.  I still have the first one I did which is terrible and I keep as a reminder of my own fallibility, but I have now developed a method that gives consitently good results.  There is a lot of details involved, far too much to describe here.  In principle you need to learn how far you can shift an individual reed up or down without compromising either its abilty to speak quickly, or its pitch stability.  To an extent its a matter of knowing what you can get away with.  Different sets of Hohner reeds vary in the way they are made, and of course there are differences across the range of three octaves or so found on a typical treble keyboard.  No two conversions are ever quite the same. 

Best way to learn is to try, but expect to learn from your mistakes, and ruin a good number of reeds as you learn.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

nemethmik

  • Guest
Re: Repitching to D/G.
« Reply #8 on: July 22, 2011, 05:10:53 PM »

quite a number have just one tongue shifted, and some a bit more.
Are you disassembling reed-plates, and reassembling with new rivets?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repitching to D/G.
« Reply #9 on: July 22, 2011, 05:54:26 PM »

No, just moving complete reedplates.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Repitching to D/G.
« Reply #10 on: July 22, 2011, 06:14:47 PM »

Thanks Theo,

I'll be very interested to play my new instrument when I finally finish it. I reworked a set of PA reeds largely using solder since some of the pitch shifts are so great. Depending on how it sounds I might go back and re-tune as you suggest where the change in pitch isn't quite so great.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Repitching to D/G.
« Reply #11 on: July 22, 2011, 11:58:44 PM »

Thanks Theo,

I'll be very interested to play my new instrument when I finally finish it. I reworked a set of PA reeds largely using solder since some of the pitch shifts are so great. Depending on how it sounds I might go back and re-tune as you suggest where the change in pitch isn't quite so great.

I've been there and done that, the results weren't pretty. Theo did hint that they wouldn't be but I just had to go and find out for myself.  ::)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Repitching to D/G.
« Reply #12 on: July 23, 2011, 01:06:02 AM »

Hi Pete,

So you retuned some PA reeds with solder? Would you mind relaying what kind of reeds you started with and what they sounded like after?

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Repitching to D/G.
« Reply #13 on: July 26, 2011, 12:26:58 AM »

Hi Pete,

So you retuned some PA reeds with solder? Would you mind relaying what kind of reeds you started with and what they sounded like after?

Ed

Theo is right about terminology, I was referring to the replacement silver solder (called lead free solder) used in electrical work, not the jewelers silver I use for soft soldering. Keep that lead out of the workshop as it is deadly combined with the wax that is floating around.

Here in Adelaide there are plenty of old PA's floating around, and the good ones to get hold of are the ones where they have let the grand kids play about with them, the outsides are normally ruined but the reeds are very good. I have used many brands, and to date when I have re pitched a reed for a repair I normally mark the reed so that I know if I have replaced it in the past, I have never had one of those reeds break, I can only say I'm very surprised that one has never broken.

Different things seem to happen when you tune a reed down using the two different methods. If you tune down using the weighted method you will notice that the reed is not as bright as the reed that has been filed down, but the reed that has been filed down might run the risk of breaking (there was a well known Italian reed maker who made the root of his reeds to thin to make them fruitier at the top end, but within a few months the reeds were breaking) everything here is a compromise. To many instruments have ruined by re-pitching, this is why for the instruments like a re pitch from D/D# to C#/D or C/C# to B/C (my first response is to try to talk the owners out of the re-pitch, as they are useful in some sessions) I tend to use solder as these instruments as another owner at a later date might like to go back the original tuning as they might like to play with the Eb flute, or even get into some of those Irish sessions in Ireland where they play in Eb. Yes they might be slightly slower, but with such a small shift it has not been noticeable or caused a problem for any player who i have done this for. But then again where I have used the file the reeds have never broken.

Like most makers and repairers I have a big stack of PA reeds in my draws on the tuning bench, these are very handy for so many broken diatonic reed replacements, sometimes I will re pitch using the file, sometimes I use the solder, but the thing to remember is that it is easy to take off solder you cannot add metal that you have filed off.
Just go slow.
Peter
« Last Edit: July 30, 2011, 08:55:02 AM by Peter Stormy Hyde »
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Repitching to D/G.
« Reply #14 on: July 30, 2011, 09:06:45 AM »

Firstly you start by moving the reeds down a cavity, ...
you might have to take a little timber off the top of the reed cavity for the reeds and valves to clear.
You now have to drop a small amount of silver solder on to the tip to take the pitch down...
then you can file the silver solder back up to the desired pitch.
At the very top end you will need to get your hands on the right reeds, but this is far cheaper than getting a new set of reeds.
Peter, this sounds terribly simple. I wonder whether regular (zinc) solder would work either?
Thank You!

It will work and in fact as it is heavier with the lead so you do not have to put so much on. If you do try this method at any time and if you have to build up on a very low fundamental, then bevel the edge of the solder as this will help the response.

My pleasure
Peter
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Repitching to D/G.
« Reply #15 on: July 30, 2011, 04:54:26 PM »

Hi Pete,

So you retuned some PA reeds with solder? Would you mind relaying what kind of reeds you started with and what they sounded like after?

Ed

Almost but not quite Ed! I retuned a C/C# Hohner down to B/C. I found it hard to get a nice neat blob of solder in the centre of the smaller reed tips in many cases so the results were mixed and it was very fiddly! My experiments beefing up the belly of some of the chord reeds to raise the pitch worked, but the sound of the reeds was quite muddy in tone so less than successful. Even weighting the tips of the chord reeds wasn't that neat although they sounded fine. See pic. I'm fine doing soldering on circuit boards but steel reeds are less accommodating.  :o

Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repitching to D/G.
« Reply #16 on: July 30, 2011, 05:52:59 PM »


Almost but not quite Ed! I retuned a C/C# Hohner down to B/C. I found it hard to get a nice neat blob of solder in the centre of the smaller reed tips in many cases so the results were mixed and it was very fiddly!

I've found the best result comes if you don't worry about the small size of the solder blob,  you can always file off the surplus.

Quote
My experiments beefing up the belly of some of the chord reeds to raise the pitch worked, but the sound of the reeds was quite muddy in tone.

I think this is a pretty bad idea.   Solder just does not have the right properties of springiness.  Useful in an emergency, but only for a temporary repair.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Repitching to D/G.
« Reply #17 on: July 30, 2011, 11:14:39 PM »

I think this is a pretty bad idea.   Solder just does not have the right properties of springiness.  Useful in an emergency, but only for a temporary repair.

I couldn't agree more but I had to make my own mistakes. After all I might just have been the genius that proved the rest of the world wrong. That didn't work then did it?  ::)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

mglamb

  • Guest
Re: Repitching to D/G.
« Reply #18 on: July 31, 2011, 02:32:16 AM »

After all I might just have been the genius that proved the rest of the world wrong.

Well, it's not like none of the rest of us have ever done that!   ;D
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Repitching to D/G.
« Reply #19 on: July 31, 2011, 04:48:46 AM »

I did have the idea to take some brass string, cut it to an appropriate length then solder that to the reed tongue near the rivet. I hoped to raise the pitch this way. I also planned on wicking most of the solder away so that the strengthening piece was largely the brass wire. Only problem was, I needed about six hands to hold it down and solder the length.I did try this on a scrap reed just for practice. I never did get the brass wire to stick to the tongue in order to try it out.  Oh well.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal