Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bending notes  (Read 1714 times)

0 Members and 1 Guest are viewing this topic.

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Bending notes
« on: July 09, 2011, 03:32:15 PM »

I don't know if this is in the right place but anyway...

I just got my Gaillard (woop!) and, since it's possible to play with a single reed I've been messing around a little with bending notes. Does anyone here know if bending notes is bad for the reeds at all? Don't want to spoil my lovely handmade bincis!

mglamb

  • Guest
Re: Bending notes
« Reply #1 on: July 09, 2011, 04:10:05 PM »

Overblowing a reed will certainly increase metal fatigue and reduce the time before it first goes out of tune and then fails.  I wouldn't do it on my box... 
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Bending notes
« Reply #2 on: July 09, 2011, 04:36:23 PM »

When I bend a note I close the note nearly completely before giving it a bit of power. I presumed that the increased pressure in the chamber compresses the sound wave (or something...I'm no physicist) and lowers the pitch. It's not just overblowing the reed fully open, I'd kinda hoped it wouldn't be as bad for the reed.

I'd heard piano accordion players do it, that's where I got the idea.

mglamb

  • Guest
Re: Bending notes
« Reply #3 on: July 09, 2011, 04:45:08 PM »

The air pressure will be the same, no matter how open the pallet is.  Velocity is what will change.  You might want to have a look at this:  http://www.youtube.com/watch?v=amb3zrou5_g.
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Bending notes
« Reply #4 on: July 09, 2011, 04:51:56 PM »

I've seen that alright, it kinda sounds awful though, doesn't it?

So when I'm bending a note there's an increase in velocity because the air is coming out of a smaller opening with the same pressure, yeah? And does that compress the sound wave or something?

http://physicstoday.org/resource/1/phtoad/v64/i3/p44_s1?bypassSSO=1

I found this article which suggests that it's easier to bend a note when the other reed on the reed plate is lower than the note you're sounding...and I have no idea why...

mglamb

  • Guest
Re: Bending notes
« Reply #5 on: July 09, 2011, 05:09:36 PM »

What the author fails to make clear is that accordion reeds have valves, so that only one reed will sound, period.  My guess on the downward pitch bend caused by partially opening the pallet and increasing bellow pressure is that the combination of lower flow volume coupled with higher flow velocity allows the reed to vibrate at a somewhat lower pitch than normal.  I bet that the partially opened pallet is the key here, allowing higher air velocity than normally available, sort of like putting a thumb over the end of a garden hose.  The end result of this would be overblowing the reed and subsequent pitch drop.

I don't really care for the sound of the box in the video, but I'm not into pitch bending so no surprise there.  Good luck with your new box!
Logged

mglamb

  • Guest
Re: Bending notes
« Reply #6 on: July 09, 2011, 05:11:47 PM »

Another quick thought on doing this with a piano accordion - you've got enormous bellows capacity there and the subsequent velocity increase through a partially-opened pallet would be significant.
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Bending notes
« Reply #7 on: July 09, 2011, 07:08:56 PM »

Yeah, it's probably a bit easier to get it smooth as a result.

I'm not gonna worry too much about doing the odd bend, sure most of what I play is dance music so I won't be doing bends there. I reckon I'll let the reeds get played before I start bending much tho!

Thanks for the well-wishing, I'm very happy with my new box. So much so, in fact, that I'm about to email Bertrand to order a second one!

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Bending notes
« Reply #8 on: July 10, 2011, 06:20:47 PM »

I too use LDbosca's method - minimally depress key and use high pressure (pull works better).  The box must be very dry tuned* - one voice is even better.  8)

Mine is a L+M and the lower voice in the top half of it's range bends most easily. Nice for Blues, albeit short of what a 'mouthie' can achieve.

Yes, I'm well sure it'll "Donald Duck"* your reeds  :|bl
*A bit of Cockney rhyming slang

[edit] As per not most Hohners!
« Last Edit: July 11, 2011, 03:44:03 PM by Chris Ryall »
Logged
  _       _    _      _ 

Hello

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 148
  • mmm
Re: Bending notes
« Reply #9 on: July 11, 2011, 01:02:13 PM »

I saw Chris Parkinson do this on his Nuage.  I tried it myself on a pokerwork, but with limited no success.
Logged
Trying is the first step towards failing
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal