Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed tongue orientation over soundboard holes  (Read 6183 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Reed tongue orientation over soundboard holes
« on: July 11, 2011, 11:34:22 PM »

I'm looking for information about why reeds are oriented such that the base or rivet end of the reed tongue is closest to the soundboard/air hole rather than the tip of the tongue. It occurred to me that if the tip of the tongue were directly over the hole in the soundboard that there might be a faster, and perhaps, better low volume response in a reed, especially when the reeds are in chambers glued flat to the soundboard.

Traditional reed blocks like the standard Pokerwork/Erica reedblocks need to have the plate with rivet of the tongue nearest the sound/air hole for ease of tuning. However I can't see that ease of tuning is a relevant reason for reed plate orientation when waxed to flat mounted reed chambers.

Has there been a discussion about this design issue? I've been looking in the archives and haven't found anything as yet.

Thanks.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Reed tongue orientation over soundboard holes
« Reply #1 on: July 12, 2011, 12:35:03 AM »

I'm looking for information about why reeds are oriented such that the base or rivet end of the reed tongue is closest to the soundboard/air hole rather than the tip of the tongue. It occurred to me that if the tip of the tongue were directly over the hole in the soundboard that there might be a faster, and perhaps, better low volume response in a reed, especially when the reeds are in chambers glued flat to the soundboard.

Traditional reed blocks like the standard Pokerwork/Erica reedblocks need to have the plate with rivet of the tongue nearest the sound/air hole for ease of tuning. However I can't see that ease of tuning is a relevant reason for reed plate orientation when waxed to flat mounted reed chambers.

Has there been a discussion about this design issue? I've been looking in the archives and haven't found anything as yet.

Thanks.

Now you are going into deep waters!

BUT; as I have spent years working on concertinas and accordions I have asked the same question (of myself) as the concertina draws its air from the tip area, but as you say the accordion draws its air from a hole near the root.

On my flutina I have a floating reed pan similar to the concertina, so I made a decision to put the reeds around the "other way" that is, tip above the holes, where I normally have root above the holes.

End result; absolute disaster, the reeds had changed pitch so much and the response was slow from my bench tuning, I immediately turned them back around and things went back to normal.

I think you will notice on flat mounted reed blocks that the holes are below the root.

I have no idea at all what caused the problem, and at the time I did not have the time to try and do more research

I did talk to a concertina maker about it at a folk festival here last Easter and I suggested he should try the reverse and see what happens, but I do not think he has any time for research either.

I think some of the answers may lay with the cassotta on piano accordions, as they put the reeds in a different configuration to the other reeds, this always flattens the reeds and it is all over the place, like a dogs breakfast.

I hope you get more answers than this.
Peter
 
« Last Edit: July 12, 2011, 12:42:05 AM by Peter Stormy Hyde »
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed tongue orientation over soundboard holes
« Reply #2 on: July 12, 2011, 12:51:25 AM »

Interesting question! I suspect the reason why reeds do not respond well when put around the other way has to do with the valves. Reeds that do not carry valves (usually from c#2) sound best when turned the other way, especially in a tremolo setting. The highest piccolo reeds, usually only found in chromatic accordions, should always be turned around. This also allows for less volume in their reed block chambers which will make them respond faster.
« Last Edit: July 12, 2011, 12:54:17 AM by diatonix »
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed tongue orientation over soundboard holes
« Reply #3 on: July 12, 2011, 01:19:16 AM »

Interesting question! I suspect the reason why reeds do not respond well when put around the other way has to do with the valves. Reeds that do not carry valves (usually from c#2) sound best when turned the other way, especially in a tremolo setting. The highest piccolo reeds, usually only found in chromatic accordions, should always be turned around. This also allows for less volume in their reed block chambers which will make them respond faster.


I thought the highest reeds were turned around because of the wedge shaped chamber as is seen in standard Hohner reed blocks. Given that the smallest reeds don't speak properly with too large a chamber some kind of blocking has to be installed which gives full access to the hole in the soundboard. So the only orientation for the reed which allows the tongue to vibrate properly would be to place the tip of the reed tongue nearest the hole in the soundboard.

It was interesting to see Lester's photos of the reed blocks he made at the Melodeon making workshop. The smallest four reed chambers have blocking with individual cutouts for each reed. Very interesting and something I'd not seen before.

Hope to hear more about this topic from others. It came up for me because of my experience trying a friend's Castagnari Lily at the Ale I attended this weekend. The sensitivity of the reeds to any pressure at all from the bellows got me to thinking about how to do that with my older Hohner reeds - if it's at all possible.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Inventor

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 117
Re: Reed tongue orientation over soundboard holes
« Reply #4 on: July 12, 2011, 01:24:55 PM »

I had a prototype of a concertina made to my specification in Moscow some years ago. This was made in the same way that the Russians build Bayans, so it had all the reeds of each side one reedplate. I had designed it to be as compact as possible so that no less than 67 buttons fitted into a 7" hexagon.
 
When it was delivered it had two or three faults; as you would expect with any prototype.  One of these faults was that the tips of the tongues for one note on the left hand side were the wrong way round so that they were immediately below the sound hole, (all the others were placed correctly at the far end of the tone chambers).  This note was correctly in tune with the rest of the instrument, but the timbre of this note was totally different from the timbre of all the other notes.
 
The sound of the other notes was nice and smooth, but the sound of this note I can only describe as Awesome ! It was much louder and rougher than the other notes, I can only say that it was like comparing the the sound of Wheatstone and Jeffries concertinas only more so.

Inventor.         
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed tongue orientation over soundboard holes
« Reply #5 on: July 13, 2011, 05:45:15 PM »

Inventor,

Your experience leads me to think that the reason for the standard reed plate orientation is that the tip of the tongue does most of the sound production. I've read about some woods being better than others at absorbing upper harmonics. In the standard orientation the sound waves must bounce around in the chamber before turning a corner to go out the sound hole so the chamber may be acting as a kind of filter or dampener for some of the frequencies produced by the tongue. If the tip of the tongue is placed directly over the air hole, there would be less filtering of the sound waves and you'd end up with a larger spectrum of the frequencies produced by the vibrating tongue.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tongue orientation over soundboard holes
« Reply #6 on: July 13, 2011, 06:38:28 PM »

Whatever the theory, and I suspect its quite a bit more complicated than it first seems, there are practical aspects to this in that some things work better than others.

Generally speaking the highest reeds don't respond so quickly, play more quietly and are more prone to choke when in the standard orientation.   Reversing the reedplate so that the tongue points downwards can give improvements to some or all of these problems.  Reducing the volume of the reed chamber, and leaving off the valves can also help.  A process of trial and error will show you which works best for any particular combination or reed type, pitch and for different reedblock constructions. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed tongue orientation over soundboard holes
« Reply #7 on: July 13, 2011, 11:02:02 PM »

I know others consider it heresy, but I dislike the sound of a Wheatstone concertina - too harsh with so many harmonics clashing!  one of the benefits of age is that your high frequency hearing diminishes, but I still don't like the Wheatstone sound.  The Jefferies on the other hand strikes me as carrying just as well, but much more mellow and harmonious.

Do I take it from the above comments that the Wheatstone and Jefferies have very dissimilar reed mountings?

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tongue orientation over soundboard holes
« Reply #8 on: July 14, 2011, 07:58:43 AM »


BUT; as I have spent years working on concertinas and accordions I have asked the same question (of myself) as the concertina draws its air from the tip area, but as you say the accordion draws its air from a hole near the root.


I think Peter Stormy Hyde is confusing one aspect of concertina design that is absent from accordions.   Both concertinas and melodeons/accordions have the vent that opens/closes to sound the reed at the root end of the reed.  Only melodeons/accordions commonly have the reed reversed for the highest notes.  What concertinas have that is different is a narrow opening in the reedpan immediately below the tip of the reed tongue that directs the airflow past the reed.   There is no equivalent of this in melodeon/accordion reeds where the reed tongue opens directly into the reed chamber on one side and the surrounding space on the other.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed tongue orientation over soundboard holes
« Reply #9 on: July 14, 2011, 08:27:57 AM »

I know others consider it heresy, but I dislike the sound of a Wheatstone concertina - too harsh with so many harmonics clashing!  one of the benefits of age is that your high frequency hearing diminishes, but I still don't like the Wheatstone sound.  The Jefferies on the other hand strikes me as carrying just as well, but much more mellow and harmonious.

Do I take it from the above comments that the Wheatstone and Jefferies have very dissimilar reed mountings?
Interesting viewpoint, Rob! I actually prefer the sound of Wheatstone concertinas rather than Jeffries. To my ears a good Wheatstone has a more rounded, smoother sound, compared with the rather nasal sound of a Jeffries. But hey - we're all different and have different preferences, and I'm glad about it!

The two makes of concertina do indeed have different reed pan design, which is claimed to be the reason for the two different types of concertina sound. Wheatstone and Lachenal concertinas have a radial reed pan like this:
http://www.concertina.info/tina.faq/images/reed1.htm

Jeffries and Crabb concertinas have parallel reed pans:
http://www.concertina.net/images_ms_crabb/mws_Crabb_LH_reed_pan_top.jpg
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed tongue orientation over soundboard holes
« Reply #10 on: July 14, 2011, 02:22:45 PM »

Interesting topic, and one that apparently comes up in a lot of people's minds.  I did some experimenting with it a while back, and found like everyone before me, with all but the littlest reeds, that performance is much better in the standard configuration where the tongue tip is distant from the air hole.  It was explained once to me that it is an issue of pressure, not just air flow, and that makes sense as much as anything else I've heard.  It's the same with the reed block chamber, and the tongue gap, there is a sweet spot in there somewhere, too much, or not enough, pressure and/or air flow and performance is loss.

Also interesting to me that the smallest reeds react differently.  Where sometimes putting them  upside down, or creating a hole around the reed to allow more air to pass, both things detrimental to the bigger reed's performance, actually sometimes is the only way to get itty bitty reeds to sound at all.

I figured Owen would have some engineering light on this subject.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tongue orientation over soundboard holes
« Reply #11 on: July 14, 2011, 02:45:05 PM »

...It was explained once to me that it is an issue of pressure, not just air flow, ....


I was thinking of concepts like pressure and flow in an earlier post when I suggested that the theory is considerably more complicated than it seems at first sight.  The principle reason for this greater complexity is that we usually think of pressure and flow in more or less steady or static  situations. But here we are dealing with oscillating systems (the reed tongue and sound waves) combined with steady flow of air while a note is playing, and a sudden change in pressure and flow when a pallet opens.  This brings in all sorts of hard sums that I can't do that relate to acoustic coupling between the reed and air in a semi-enclosed chamber on one side, and more or less open air on the other side.  In all this the most difficult part of the process to understand is the details of how a reed tongue starts to vibrate, and in practice its the very high notes and the very low notes where the process can get stalled most easily, and where a well set up instrument wins out.

I'd love to have a better understanding of the theory, but some helpful observations from trial and error are a good start. ;D
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed tongue orientation over soundboard holes
« Reply #12 on: July 14, 2011, 07:44:47 PM »

I actually prefer the sound of Wheatstone concertinas rather than Jeffries. To my ears a good Wheatstone has a more rounded, smoother sound

I live with three Wheatstone concertinas and they all sound remarkably different.
The best of the three manages to have a very bright sound without being at all harsh - a sort of silky sheen - just wonderful!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Reed tongue orientation over soundboard holes
« Reply #13 on: July 16, 2011, 10:05:20 AM »


BUT; as I have spent years working on concertinas and accordions I have asked the same question (of myself) as the concertina draws its air from the tip area, but as you say the accordion draws its air from a hole near the root.


I think Peter Stormy Hyde is confusing one aspect of concertina design that is absent from accordions.   Both concertinas and melodeons/accordions have the vent that opens/closes to sound the reed at the root end of the reed.  Only melodeons/accordions commonly have the reed reversed for the highest notes.  What concertinas have that is different is a narrow opening in the reedpan immediately below the tip of the reed tongue that directs the airflow past the reed.   There is no equivalent of this in melodeon/accordion reeds where the reed tongue opens directly into the reed chamber on one side and the surrounding space on the other.

You are right at this point of course, but I do wonder why there is no need to turn a concertina reed around at the higher end. But then again I have heard a few concertinas that are very weak up the high pitch end, perhaps they would benefit from a turn around!
At the end of the day to much work and not enough time for research.

Peter
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed tongue orientation over soundboard holes
« Reply #14 on: July 22, 2011, 05:55:08 PM »

Interesting thread. My gut feeling would be that having the hole at the root means that more of the reed is excited, meaning that the harmonic range is greater. This would be it a more rounded tone, less harsh, less shrill. This also helps to explain the difference between block and pan, different parts of the reed get the air first so the timbre is different.

That is probably absolute rubbish and I have nothing to back it up whatsoever.

I have tried to understand the melodeon reed in an acoustic way, using some of the vibration stuff that we did this year. It's horribly difficult, really. The equations of a cantilevered beam don't have an analytical solution for one thing and I have no idea how that couples to the air. I'm guessing that you can model it as a cantilevered beam with a distributed force varying with time. Which makes my brain hurt even more.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Reed tongue orientation over soundboard holes
« Reply #15 on: July 26, 2011, 12:42:52 AM »

Interesting thread. My gut feeling would be that having the hole at the root means that more of the reed is excited, meaning that the harmonic range is greater. This would be it a more rounded tone, less harsh, less shrill. This also helps to explain the difference between block and pan, different parts of the reed get the air first so the timbre is different.

That is probably absolute rubbish and I have nothing to back it up whatsoever.

I have tried to understand the melodeon reed in an acoustic way, using some of the vibration stuff that we did this year. It's horribly difficult, really. The equations of a cantilevered beam don't have an analytical solution for one thing and I have no idea how that couples to the air. I'm guessing that you can model it as a cantilevered beam with a distributed force varying with time. Which makes my brain hurt even more.

If it is absolute rubbish at least it is "nice rubbish"
Its enough to make me have a lay down and "take a Bex" as well
Peter
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal