Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed block tapering  (Read 3558 times)

0 Members and 1 Guest are viewing this topic.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Reed block tapering
« on: July 28, 2011, 10:18:24 AM »

I'm bored at work with little to do, so I thought I'd ask a question that's been bothering me for a while.

On lots of melodeons, the reed blocks taper from the bass end to the treble end. Some scale with height, some scale with area (i.e. one has constant width but variable height, the other has variable width and height). There are several reasons for this. One is to do with airflow to the reeds, preventing the higher reeds from choking and enabling the lower reeds to sound. Another is that the reeds get physically bigger, so the chambers have to be bigger to allow the reed to move.

My question is, does anyone know if there is any truth to the claim that there is an acoustic aspect to chamber size? I always assumed that this was exaggeration, but I've now heard that many concertina chambers are supposedly "tuned" to the note of the particular reed. Obviously it is going to be very rough, but I'm wondering whether reed chambers could be tuned such that the resonating frequency of the air inside the chamber is the fundamental of the reed. In which case, how should the reed blocks be tapered?

I should be able to answer my own question (and probably will have it explained to me next term when I take Aeroacoustics), but at the moment my brain is like an out of date computer. 5 or 6 years ago it was considered very advanced, very ahead of it's time and very good at doing what it did. Now though it has had so many updates piled on it, so many changes of OS and not enough memory upgrades such that it takes 10 minutes to load up and crashes as soon as you try to do anything complicated. Nowadays it's only really suitable for playing solitaire.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed block tapering
« Reply #1 on: July 28, 2011, 12:54:53 PM »

Very interesting idea. My question then is, "How do they tune the chamber?" Once you know the process for tuning a chamber, you could go about it empirically using the dimensions of a standard melodeon reed. I wonder though if it would be possible with melodeon reeds since you have two different notes for each reed plate and chamber? You might be able to do such a tuning on a PA chamber given that the two reeds on the plate sound the same note.

Did you see Lester's photos of the reed blocks he made for his new instrument at the Melodeon Maker's course? I'm fascinated by the splitting of the smallest chambers to create separate chambers. There's only so far you can go with this technique but it might have some application for tuning a reed chamber.

Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed block tapering
« Reply #2 on: July 28, 2011, 01:16:32 PM »

Well my expectation is that the whole thing is fairly negligible to be honest. But if it isn't then you could work out the right volume for the chamber of say 4th button G and then the volume for the chamber an octave above and assume it's linear between them... that would do it. The difference between semitones or tones is going to be less than you can easily make anyway.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Ga

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: Reed block tapering
« Reply #3 on: July 28, 2011, 07:16:49 PM »

Yes, there is most definitely truth to the idea that a chamber, sealed or otherwise, is tuned to certain frequencies.  Look at the reflex ports on high end bass amplifiers and acoustic amplifiers, also your high power PC speakers - all have a tube or access hole to "tune" the enclosure.   There is a whole industry which begs to differ wirth those people (usually non-engineers who don't know their dBs from their elbows) who claim it's all tosh and piffle.

That said, there are some reasonable guessworks and rules of thumb which can help.   

Helmholtz is your man.  Look for "tuning port", "Helmholtz frequency", "acoustic resonance" etc etc etc.

It's a black art but very very cool.



 
Logged

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Reed block tapering
« Reply #5 on: July 29, 2011, 04:31:46 PM »

Helmholtz is your man.  Look for "tuning port", "Helmholtz frequency", "acoustic resonance" etc etc etc.
It's a black art but very very cool.
Heck, they even use this "black art" to tune air intake ports in car engines!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed block tapering
« Reply #6 on: August 07, 2011, 02:55:41 PM »

Well my expectation is that the whole thing is fairly negligible to be honest. But if it isn't then you could work out the right volume for the chamber of say 4th button G and then the volume for the chamber an octave above and assume it's linear between them... that would do it. The difference between semitones or tones is going to be less than you can easily make anyway.

Two things to bear in mind here -- one is that given the dimensions of the reed chambers and the holes the resonant frequencies will mostly be much higher than the fundamental, and the other is that resonances other than the reed itself are generally a bad thing (this applies to "soundboards" and reed blocks as well) because the most likely effect is to absorb energy from the reed and dampen the vibration.

The best construction for a free-reed instrument is usually to have it as rigid and non-resonant as possible, it's not at all like the body/soundboard of a stringed instrument with which parallels are often erroneously drawn.

The biggest influence of reed chamber size is probably to slow the initial pressure rise when a valve opens to help prevent the reed choking, especially on bass reeds where too small chambers or reed blocks can make the reeds reluctant to start.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed block tapering
« Reply #7 on: August 08, 2011, 12:20:05 PM »

The biggest influence of reed chamber size is probably to slow the initial pressure rise when a valve opens to help prevent the reed choking, especially on bass reeds where too small chambers or reed blocks can make the reeds reluctant to start.

This whole discussion started me thinking of routing reedblocks from solid to give a smoother flow (like smoothing out engine manifolds), but I think you've got something here about choking. My favourite portable box is a BPII, but it is particularly prone to choking when playing outdoor and pushing for maximum volume.  The basses choke first and indicate that you've already reached full volume.  Of course, being a small cross section bellows, you can put a lot of pressure into the box!  Bigger boxes don't suffer the same.

Rob.
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed block tapering
« Reply #8 on: August 08, 2011, 07:55:21 PM »

Reeds choke mainly due to insufficient/incorrect gap between tip of the tongue and the frame. Unfortunately, since there are so many different types, qualities and categories of reeds, there are no precise rules to follow. More flexible steel requires a more generous gap.  Players who like to push their boxes to the limit will in most cases prefer a larger gap, especially in the lower notes. This applies also and very much so to a mano reeds. I have never come across  situations where choking was caused by other factors (which doesn't necessarily mean that these do not exist).
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed block tapering
« Reply #9 on: August 08, 2011, 11:43:57 PM »

Reeds choke mainly due to insufficient/incorrect gap between tip of the tongue and the frame. Unfortunately, since there are so many different types, qualities and categories of reeds, there are no precise rules to follow. More flexible steel requires a more generous gap.  Players who like to push their boxes to the limit will in most cases prefer a larger gap, especially in the lower notes. This applies also and very much so to a mano reeds. I have never come across  situations where choking was caused by other factors (which doesn't necessarily mean that these do not exist).

I have -- many of the smaller boxes (e.g. Oakwoods) suffer from this, including Rich Arrowsmith's (which was terrible), Nick Walden's (not quite as bad), and my mum's nicked one (better but still noticeable). It's not just the higher pressure possible with smaller bellows, they choke even if you allow for this and after countless attempts (in Richard's case) to reset the reeds. Of course if reeds are set with too small a gap they choke, but no amount of resetting seems to fix this in some cases if the reed blocks are small.

When I got Martyn to build the first Model 4 (mine) I got him to take the reed block measurements off my Castagnari Dony which had fantastic basses, the blocks were considerably bigger then Oakwood normally used with a lot more air volume under the reeds. Exactly the same reeds as all their other boxes, but no signs of choking even when pushed really hard.

Also when Crabb built my wife's G/D concertina (the first they'd made in a bigger frame size for many years) Neville said that the reason the low G was often slow starting was too small a reed chamber, so just this reed was put onto a built-up deeper chamber sticking up above the normal reed pan -- result, no choking and quick starting. He said he'd been wanting to try this for years but nobody had been willing to try it out...

So that's two separate pieces of evidence on two completely different free-reed instruments -- not absolutely conclusive but pretty strong evidence.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed block tapering
« Reply #10 on: August 09, 2011, 08:35:55 AM »

That's interesting, Ian!
I've just remembered a case where choking (or, at least, a very annoying frequency-drop during forte/fortissimo playing) was in fact caused by something else: when I tested the box without the bass-cover everything was ok, which showed that the reeds quite simply didn't get enough air! The problem was then easily solved by enlargening the openings in the wooden cover...
Which leads me to suspect, that rather than the tone-chambers themselves, another possible cause might be too small (i.e. in most cases: round) tone-holes in the "soundboard" especially in cases where there are also round holes in the bottom of the reed block (very often the 2 round holes do not overlap completely).
It could also be worthwhile checking the lift of the pallets, especially where multiple levers are involved.
« Last Edit: August 09, 2011, 08:38:50 AM by diatonix »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed block tapering
« Reply #11 on: August 09, 2011, 08:48:32 AM »

Third piece of evidence:
couple of years ago I was asked to look at an Oakwood with choking B bass.  B was the lowest bass on this box.  I suspected the reed so replaced it with a new one,  no improvement,  I tried the original reed on a larger reedblock where it performed perfectly, so I'm sure this was another example of insufficeint space inthe reed chamber.  I finally cured the problem by removing the brass weight from the reed and tuning it up an octave.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal