Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: HA 114 Raspy sound on bellow change?  (Read 1336 times)

0 Members and 1 Guest are viewing this topic.

Doug Barr

  • Member
  • *
  • Offline Offline
  • Posts: 24
HA 114 Raspy sound on bellow change?
« on: July 28, 2011, 07:14:25 PM »

I am getting a raspy sound from many of my lower notes when I reverse the bellows while holding down the same button.  Sounds to me like  the plastic valves.  What is the solution, change valves to leather with/without a spring support? Would like to hear from others that have experienced the same and found a solution.  Thanks  Doug
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: HA 114 Raspy sound on bellow change?
« Reply #1 on: July 29, 2011, 12:40:43 AM »

It does indeed sound like valve noise, especially if it is most pronounced on the lower notes. You could try replacing a couple of them with leather or vileda (synthetic leather) valves to see if it makes a difference. If it cures the problem then go ahead and replace all of the valves on the reeds which are noisy. You may need to tweak the tuning a little as a result, although if the notes are the very lowest ones, you might just get away without.

However, is the rasping noise actually intrusive during normal playing? It may be that you are just over-sensitive to it on trying out the bellows reversal in isolation and out of context of playing a tune. To a listener, it may well be OK.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Doug Barr

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: HA 114 Raspy sound on bellow change?
« Reply #2 on: July 29, 2011, 03:45:13 AM »

It does indeed sound like valve noise, especially if it is most pronounced on the lower notes. You could try replacing a couple of them with leather or vileda (synthetic leather) valves to see if it makes a difference. If it cures the problem then go ahead and replace all of the valves on the reeds which are noisy. You may need to tweak the tuning a little as a result, although if the notes are the very lowest ones, you might just get away without.

However, is the rasping noise actually intrusive during normal playing? It may be that you are just over-sensitive to it on trying out the bellows reversal in isolation and out of context of playing a tune. To a listener, it may well be OK.

Yes I am sensitive to that sort of thing but not overly.  My non- musician wife can also notice the sound in context of playing a tune when I use the lower reed stop...I consider it a distraction and would like to eliminate it as much as possible  thanks  Doug
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HA 114 Raspy sound on bellow change?
« Reply #3 on: July 29, 2011, 09:03:15 AM »

Agree eith the advi e so far, but you will have to take the reeds of the reedblocks so you can replace both valves so you will have to re-wax them, preferably with fresh wax. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal