Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Bass buttons rattle in their hole  (Read 6259 times)

0 Members and 1 Guest are viewing this topic.

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Bass buttons rattle in their hole
« on: August 15, 2011, 09:49:38 AM »

I have a box with a very annoying tapping from the bass buttons caused by the shaft rattling in the hole when the button is pressed.  It is a perloid finish.  I think sleeving the hole would correct this.  I am considering a hard felt liner or should I be looking at a more engineering solution with oilite bushes ?

Any advice / experience would be very helpful.
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bass buttons rattle in their hole
« Reply #1 on: August 15, 2011, 10:27:38 AM »

I would recommend purpose-made bushing felt, such as that used for bushing concertina buttons. It is fine, dense and hard wearing. Available from David Leese, concertina repairer and parts supplier based in North Wales:
http://www.concertina-spares.com

Specifically this stuff:
http://www.concertina-spares.com/catalogue11.htm

One piece is more than sufficient for a melodeon.
David is very efficient in fulfilling orders; highly recommended.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Bass buttons rattle in their hole
« Reply #2 on: August 15, 2011, 01:12:57 PM »

It's worth mentioning that you will have to use a tapered reamer to enlarge the holes first.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: Bass buttons rattle in their hole
« Reply #3 on: August 16, 2011, 10:37:07 AM »

Thanks to Steve and Martyn.  Getting the job in hand now.

Martin
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bass buttons rattle in their hole
« Reply #4 on: August 16, 2011, 07:15:10 PM »

Charlie Marshall has, in stock, some self adhesive bushing felt that I have used, successfully for this very job.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Bass buttons rattle in their hole
« Reply #5 on: August 16, 2011, 07:31:46 PM »

Charlie Marshall has, in stock, some self adhesive bushing felt that I have used, successfully for this very job.

Does he? Can't track it down on his website............maybe I'm looking in the wrong place.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Bass buttons rattle in their hole
« Reply #6 on: August 16, 2011, 07:38:02 PM »

It's here http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html
Third row down in the middle 074B.

I personally wouldn't use this for button bushing, as it's not dense enough and therefore would have a very limited life.
Far better to use a proper bushing or bearing felt glued in with PVA.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bass buttons rattle in their hole
« Reply #7 on: August 16, 2011, 09:25:10 PM »

I'll give David Leese's stuff a go then, never let it be said I am not willing to learn  ::)

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: Bass buttons rattle in their hole
« Reply #8 on: August 16, 2011, 10:14:32 PM »

Melnet wonderful as ever.  Thanks for the invaluable info.  I'll try the 'ard stuff' having suitable reamed me oles. (:)
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Bass buttons rattle in their hole
« Reply #9 on: August 16, 2011, 10:36:11 PM »

An anovver fing innit bro.  8)

Don't forget to cut the felt diagonally across the weave to prevent 'threading'.

M.

Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: Bass buttons rattle in their hole
« Reply #10 on: August 17, 2011, 08:53:38 AM »

Thanks Martyn.  There was no danger of me forgetting as I didn't know, so I am again grateful for the help.
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bass buttons rattle in their hole
« Reply #11 on: August 17, 2011, 08:59:27 AM »

An anovver fing innit bro.  8)

Don't forget to cut the felt diagonally across the weave to prevent 'threading'.

M.



Just ordered some from Dave Leese and I note he supplies it in a trapezoidal shape sort of forcing you to cut it on the diagonal.

MadDogMurdock

  • Good talker
  • **
  • Offline Offline
  • Posts: 80
Re: Bass buttons rattle in their hole
« Reply #12 on: December 12, 2011, 01:32:48 AM »

Not sure if anyone can help me, but I'm interested in getting some of this bushing felt in the USA.  Any of you have a producer name on that felt or any specifics that I might be able to track it, or something akin to it, down over here?  Thanks
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bass buttons rattle in their hole
« Reply #13 on: December 12, 2011, 01:39:50 AM »

Not sure if anyone can help me, but I'm interested in getting some of this bushing felt in the USA.  Any of you have a producer name on that felt or any specifics that I might be able to track it, or something akin to it, down over here?  Thanks
Contact David Leese directly. He will ship stuff to the US.
http://www.concertina-spares.com
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass buttons rattle in their hole
« Reply #14 on: December 12, 2011, 08:06:24 AM »

Not sure if anyone can help me, but I'm interested in getting some of this bushing felt in the USA.  Any of you have a producer name on that felt or any specifics that I might be able to track it, or something akin to it, down over here?  Thanks
Contact David Leese directly. He will ship stuff to the US.
http://www.concertina-spares.com

Indeed he does, but you can also get it from piano parts suppliers if you happen to know of one local to you.

The harder task is to find a suitable reamer.  Don't be tempted to used an ordinary twist drill which is likely to tear splinters out of the edge of the hole. 

And...   if you remove the rods by straightening the small pins which act as a hinge to the lever then there are two things to be aware of:
1) you can't bend the pins much without a risk of breaking them
2) if you do have to replace some, don't use any material that is thinner than the original or you will just introduce another source of noise.

Mainly for these two reasons I think it better to remove the buttons from the rods, and take out the whole mechanism.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bass buttons rattle in their hole
« Reply #15 on: December 12, 2011, 08:54:51 AM »

I think it better to remove the buttons from the rods, and take out the whole mechanism.
On a Hohner Erica how do you remove the buttons from the rods? They appear to be glued firmly in place.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass buttons rattle in their hole
« Reply #16 on: December 12, 2011, 09:06:22 AM »

I think it better to remove the buttons from the rods, and take out the whole mechanism.
On a Hohner Erica how do you remove the buttons from the rods? They appear to be glued firmly in place.

They are a tight push fit.  They are not easy to remove or replace, but I believe worth the effort to get the best possible result with this job.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: Bass buttons rattle in their hole
« Reply #17 on: December 12, 2011, 09:06:50 AM »

When I re did the pallet felts on an Erica I held the mechanism down very firmly and removed the screws then it will just lift out.  Be careful of the springs pushing the whole mechanism. Replacing is fidley but very doable.
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass buttons rattle in their hole
« Reply #18 on: December 12, 2011, 09:08:24 AM »

Yes on an Erica that will work,  but not on models with mushroom bass buttons.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bass buttons rattle in their hole
« Reply #19 on: December 12, 2011, 09:16:36 AM »

On a Hohner Erica how do you remove the buttons from the rods? They appear to be glued firmly in place.

They are a tight push fit.  They are not easy to remove or replace, but I believe worth the effort to get the best possible result with this job.
Thanks, Theo!

When I re did the pallet felts on an Erica I held the mechanism down very firmly and removed the screws then it will just lift out.  Be careful of the springs pushing the whole mechanism. Replacing is fidley but very doable.
Thanks Martin, but I've tried that with my Erica and found (on my particular instrument anyway) there is still not enough clearance to lift the mechanism out. Perhaps there are slight differences in internal dimensions from one instrument to another?

NB - I also released the springs from their little anchor hooks before I removed the screws which hold the mechanism in place. That way there is no danger of the spring tension ripping the screws out of the threads in the wood.
« Last Edit: December 12, 2011, 09:21:32 AM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal