Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Bass buttons rattle in their hole  (Read 6270 times)

0 Members and 1 Guest are viewing this topic.

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Bass buttons rattle in their hole
« Reply #20 on: December 13, 2011, 02:32:27 PM »

I need to bush the bass buttons on my Dino Black Pearl 3, where the buttons move all over the place.  The buttons don't seem to want to come off the levers though. Are they glued on or just pushed on?

Cheers
Kevin
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Bass buttons rattle in their hole
« Reply #21 on: December 13, 2011, 02:50:17 PM »

Kevin,
It's probably best to unscrew the buttons then remove the action with the pistons attached. It can be a bit fiddly getting the pistons to go back in the holes though. It makes it easier if you turn the box upside down to do this.

Martyn
« Last Edit: December 13, 2011, 02:52:11 PM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Bass buttons rattle in their hole
« Reply #22 on: December 14, 2011, 05:32:49 PM »

Thanks Martyn. Do I need to stand on my head as well?  (:)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Bass buttons rattle in their hole
« Reply #23 on: December 14, 2011, 07:34:22 PM »

Thanks Martyn. Do I need to stand on my head as well?  (:)

If you think it will help!   ;D

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Bass buttons rattle in their hole
« Reply #24 on: December 19, 2011, 11:41:56 AM »

Quick question  - should I ream from the outside in, or the inside out?   
 ???
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Bass buttons rattle in their hole
« Reply #25 on: December 19, 2011, 11:53:18 AM »

Quick question  - should I ream from the outside in, or the inside out?  
 ???

If you are using the same thickness felt as the original you shouldn't need to ream the holes. Perhaps just enough to remove any old felt/glue residue but be careful not to enlarge them.
I always ream from the outside in.

Martyn
« Last Edit: December 19, 2011, 11:55:08 AM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Bass buttons rattle in their hole
« Reply #26 on: December 20, 2011, 02:02:45 PM »

Thanks, and Happy Xmas!
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Bass buttons rattle in their hole
« Reply #27 on: December 20, 2011, 02:40:37 PM »

Quick question  - should I ream from the outside in, or the inside out?  
 ???

If you are using the same thickness felt as the original you shouldn't need to ream the holes. Perhaps just enough to remove any old felt/glue residue but be careful not to enlarge them.
I always ream from the outside in.

Martyn

Using a tapered reamer, shouldn't you work from both sides if you want a parallel-sided hole?
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass buttons rattle in their hole
« Reply #28 on: December 20, 2011, 03:32:40 PM »

If you want a parallel sided hole you would need a parallel reamer!
If you ream from both sides you will get closer to parallel, but still not parallel.  Since the bushing is a soft material you can accommodate some taper.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal