Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Easy ABC  (Read 22625 times)

0 Members and 1 Guest are viewing this topic.

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Easy ABC
« on: August 17, 2011, 08:04:20 PM »

I dont know if this nice little program had been covered before,but its great.
The best part you can convert midi-files to abc,but its also good for knacking abc to nice looking sheets.
http://nilsliberg.se/ksp/easyabc/ download and test.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Easy ABC
« Reply #1 on: August 17, 2011, 09:09:46 PM »

I may have seen it before but it must have been some time ago - I'll give it a try!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Easy ABC
« Reply #2 on: August 17, 2011, 10:28:53 PM »

Looks good. This program gives a nice score printout via the PDF route. I note that, when the ABC source contains chord symbols, the program automatically places the chords above the staff. I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?
Logged

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: Easy ABC
« Reply #3 on: August 17, 2011, 10:33:51 PM »

I've been meaning to get to grips with ABC for ages but just not getting round tuit. I've just downloaded 'EasyABC' and within a few minutes, I've written out a tune in ABC that plays exactly how I want it to. Pretty slick, huh! Now I've got no excuse for not learning ABC.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Easy ABC
« Reply #4 on: August 17, 2011, 10:50:57 PM »

I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?

It's in the definition of ABC: in a voice specification, you can say gchord=up or gchord=down.
There doesn't seem to be a global switch for it in abcm2ps - I'd like to know how to do that.


Edit:
It seems the only way to do this is to add "V1: gchord=down" in the headers, and to stop some programs complaining, you also need to put a V2: header at the end of the tune (even if there's no information following it and no second voice)

That is so silly I'm tempted to get the source code, hack an update (to allow a command line switch or other global setting) and offer it to the software maintainer.
I like to have the chords underneath, if I'm going to have them at all.

(Many programs like ABCNavigator and ABCexplorer use abcm2ps as a back end to do the processing)
« Last Edit: August 17, 2011, 10:59:44 PM by Anahata »
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Easy ABC
« Reply #5 on: August 18, 2011, 12:07:04 AM »

I use a little script to muck around with abc files before creating a PostScript file. It would be trivial to add a line at the top of the headers. eg.

Code: [Select]
sed -i  '1i V:Chords gchord=down' tunename.abc
That seems to work with abcm2ps.

A proper switch would be better obviously since that could be used with all those different front-ends. Personally I don't use them, I like my GNU command line  8)

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Easy ABC
« Reply #6 on: August 18, 2011, 12:10:06 AM »

I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?

It's in the definition of ABC: in a voice specification, you can say gchord=up or gchord=down.
There doesn't seem to be a global switch for it in abcm2ps - I'd like to know how to do that.


Edit:
It seems the only way to do this is to add "V1: gchord=down" in the headers, and to stop some programs complaining, you also need to put a V2: header at the end of the tune (even if there's no information following it and no second voice)

That is so silly I'm tempted to get the source code, hack an update (to allow a command line switch or other global setting) and offer it to the software maintainer.
I like to have the chords underneath, if I'm going to have them at all.

By default, ABC will generate chord symbols above the stave when printed/converted to a postscript or PDF file. For example:

"G" G2 B2 D2

To force chord symbols to go below the stave, add an underscore prefix to the chord symbol code:

"_G" G2 B2 D2
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Easy ABC
« Reply #7 on: August 18, 2011, 12:14:05 AM »

I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?

It's in the definition of ABC: in a voice specification, you can say gchord=up or gchord=down.
There doesn't seem to be a global switch for it in abcm2ps - I'd like to know how to do that.


Edit:
It seems the only way to do this is to add "V1: gchord=down" in the headers, and to stop some programs complaining, you also need to put a V2: header at the end of the tune (even if there's no information following it and no second voice)

That is so silly I'm tempted to get the source code, hack an update (to allow a command line switch or other global setting) and offer it to the software maintainer.
I like to have the chords underneath, if I'm going to have them at all.

By default, ABC will generate chord symbols above the stave when printed/converted to a postscript or PDF file. For example:

"G" G2 B2 D2

To force chord symbols to go below the stave, add an underscore prefix to the chord symbol code:

"_G" G2 B2 D2

This doesn't address Anahata's point, ie. a switch that is given to abcm2ps so that any file can be printed one way or the other regardless of the ABC code. It seems a very sensible idea.

Edit: changed "will be printed" to "can be printed".
« Last Edit: August 18, 2011, 12:19:32 AM by Andrew Wigglesworth »
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Easy ABC
« Reply #8 on: August 18, 2011, 12:38:20 AM »

That is so silly I'm tempted to get the source code, hack an update ...

I had a look and it's all C to me ... so, failure here  ::)

Not that I expected it to be in anything other really.

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Easy ABC
« Reply #9 on: August 18, 2011, 08:58:27 AM »

I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?

It's in the definition of ABC: in a voice specification, you can say gchord=up or gchord=down.
There doesn't seem to be a global switch for it in abcm2ps - I'd like to know how to do that.

Edit:
It seems the only way to do this is to add "V1: gchord=down" in the headers, and to stop some programs complaining, you also need to put a V2: header at the end of the tune (even if there's no information following it and no second voice)
That's how it's done in the converter I've been using - http://www.colinhume.com/Music.aspx. If you paste in an ABC, click "Convert", on the next page you get a button for "Chords Down". Click that, then look at the resultant ABC (another button),and "V1: gchord=down" has been added (he doesn't add the V:2 after, however). As he says on one of his pages - http://www.colinhume.com/instruct.htm, bottom of page, "Music", he sends the ABC to the converter at http://www.folkinfo.org/songs/abcconvert.php, which uses abcm2ps.
Some concatenation there, eh!
Logged

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Re: Easy ABC
« Reply #10 on: August 18, 2011, 02:06:03 PM »

Looks good. This program gives a nice score printout via the PDF route. I note that, when the ABC source contains chord symbols, the program automatically places the chords above the staff. I prefer the chord symbols below the staff, like much accordion music. I've recently been using this on-line facility to print music from ABC, which gives the choice of chords above or below. Can this choice be made in Easy ABC?

Drop a mail to Nils who have done this,his very nice and open for suggestions. I have followed since 1.1 wich were posted on folkwiki,many people responded wit wishes and bugs etc. its good when you can help someone to develop a better working program.
Logged

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Easy ABC
« Reply #11 on: August 18, 2011, 08:26:40 PM »

I contacted Nils Liberg regarding the discussion on chord placement, and received this response:

"Hello Bill,

Thanks for your mail. I have sent a question to Jean-Francois Moine - the developer of abcm2ps - to hear if he'd be willing to add support for a general chord placement instruction. I think that would be the best solution.

Best regards,
Nils Liberg"

So perhaps abcm2ps will be changed to provide a choice of chord placement.

Meanwhile, thanks to the advice given earlier, I have used the "v1: gchord=down" a couple of times today to print scores the way I want them.
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Easy ABC
« Reply #12 on: August 18, 2011, 11:34:20 PM »


By default, ABC will generate chord symbols above the stave when printed/converted to a postscript or PDF file. For example:

"G" G2 B2 D2

To force chord symbols to go below the stave, add an underscore prefix to the chord symbol code:

"_G" G2 B2 D2
[/quote]
Steve - I tried editing a tune I already had using this method in ABCNavigator and all I produced by so doing was to produce Chord Symbols above the line showing an underscore before the Symbol. Where did I go wrong?
Chris.  :(
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Easy ABC
« Reply #13 on: August 19, 2011, 12:41:39 AM »


By default, ABC will generate chord symbols above the stave when printed/converted to a postscript or PDF file. For example:

"G" G2 B2 D2

To force chord symbols to go below the stave, add an underscore prefix to the chord symbol code:

"_G" G2 B2 D2
Steve - I tried editing a tune I already had using this method in ABCNavigator and all I produced by so doing was to produce Chord Symbols above the line showing an underscore before the Symbol. Where did I go wrong?
Chris.  :(
This method works fine for me when exporting the ABC to a PostScript file or PDF file for printing. However, it may be that it only works in abcm2ps, which is a Barfly (Mac) export conversion to PostScript. That's about as much as I know, sorry.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Easy ABC
« Reply #14 on: August 19, 2011, 01:12:52 AM »

abcm2ps is an extension of the programme abc2ps, different versions of both programmes will act, um, differently.

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: Easy ABC
« Reply #15 on: August 25, 2011, 07:05:05 PM »

I don't know if there are any conventions but it seems to me that guitar chords are written over the line being played which I'm quite happy with.  I don't seem to have a problem with chords under the treble clef but it the bass clef is there as well I find them a bit detached and definitely prefer them at the top in such cases.  Are they at the top in ABC because that is the more usual way of doing things ?
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Easy ABC
« Reply #16 on: August 25, 2011, 07:18:02 PM »

I suspect they appear over the stave by default because guitar chords often appear in music with song lyrics, and if you had both below the stave there would be interference, or the the need for extra space to keep them apart.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Easy ABC
« Reply #17 on: August 27, 2011, 05:01:42 PM »

Unless I'm missing something I can't see how to paste a file directly from the clipboard which I find a really useful feature in AbcNavigator.

Steve
Logged

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Easy ABC
« Reply #18 on: August 27, 2011, 05:24:15 PM »

Steve,
I've just opened EasyABC. One of the 3 panes (lower right) is labelled "ABC code". I find I can paste ABC in there from the clipboard, no problem.
Logged

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Easy ABC
« Reply #19 on: August 27, 2011, 06:13:41 PM »

Steve,
I've just opened EasyABC. One of the 3 panes (lower right) is labelled "ABC code". I find I can paste ABC in there from the clipboard, no problem.

Thanks. 

Another question - anyone know what position on the tempo bar equates to the speed of the piece as written?

Steve
Logged
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal