Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4 5 6   Go Down

Author Topic: how much "making" constitutes "making"  (Read 23097 times)

0 Members and 1 Guest are viewing this topic.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: how much "making" constitutes "making"
« Reply #40 on: August 23, 2011, 04:54:54 PM »

Actually converting from third buttons start to fourth bottom start can be quite expensive and on a pokerwork might not be worth it. Still cheaper than a new one though!


I've no idea how much it would cost to have a box changed from 3rd to 4th button start, but I've recently declubbed a 1930s Bb/Eb Hohner Club II, changed it to 4th button start and swapped the half-row so that the whole keyboard layout matches my D/G Saltarelle, and it cost me a lot of hours, a bit of headscratching, a LOT of frustration, and only a few quid in parts (I had a couple of old past-restoration Hohners and a box of old Hohner bits that I could raid for replacement reeds etc).  It took longer than I anticipated, and I made a fair few mistakes, but I learned a lot and the satisfaction is ENORMOUS!!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: how much "making" constitutes "making"
« Reply #41 on: August 23, 2011, 05:11:10 PM »

So I call my favorite tuner guy and ask him for a quote retuning my Pokerwork DG with low notes only.  Actually, it was quite expensive to move all the reeds up and add new ones at the bottom.

Suppose it is dependant on what you call 'quite expensive'. It is a relatively easy job on a pokerwork especially as Hohner seem to use the same reed blocks as the C/F box but add a strip of wood on the bottom of the reed blocks which is easily removed, it's only waxed in, thus not requiring any woodwork to accommodate the larger reeds as they are moved down the block. When I did mine in the last month it did not even need very much remedial tuning after moving the reeds but then I decided to retune it to Viennese tuning. But as Theo stated in a previous run around this subject the task may reveal other work that is worth, or needs doing. So on a box in good condition a few hours work plus two new, or reclaimed reeds and the job is done.

It took me a total of ~8 hours to remove the reeds, clean them up, fit new valves, reinstall the reeds in new position, retune the box to Viennese tuning, restrict the treble action.

Thrupenny Bit

  • Hero Member
  • *****
  • Online Online
  • Posts: 7232
  • happily squeezing away in Devon
Re: how much "making" constitutes "making"
« Reply #42 on: August 23, 2011, 08:25:32 PM »

Andy: Unless I'm mistaken, there seems to be very few Castagnari's for sale second hand in the UK, apart from Lilly's making regular appearances.
It begs the question - do you order a new one and be certain that in 'x' months/years time you will get what you wanted, or wait  and see if Lady Luck will deal you a second hand one?
Interesting question!
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: how much "making" constitutes "making"
« Reply #43 on: August 23, 2011, 08:32:15 PM »

Lester, sounds about right:  8 hours x (low est. US$ 40?) =  320 - treble already padded out = ~US$300.

Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: how much "making" constitutes "making"
« Reply #44 on: August 23, 2011, 08:44:10 PM »

Lester, sounds about right:  8 hours x (low est. US$ 40?) =  320 - treble already padded out = ~US$300.



I'm much cheaper than that  ;D

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: how much "making" constitutes "making"
« Reply #45 on: August 23, 2011, 09:27:31 PM »

Andy: Unless I'm mistaken, there seems to be very few Castagnari's for sale second hand in the UK, apart from Lilly's making regular appearances.
It begs the question - do you order a new one and be certain that in 'x' months/years time you will get what you wanted, or wait  and see if Lady Luck will deal you a second hand one?
Interesting question!
Q

There are always used Castagnaris for sale on French diato sites with classifieds; also, there is at least one German website with used Castagnaris.  Of course, you are less likely to find a G/C when you go that route.  But for G/C and even A/D...

Thrupenny Bit

  • Hero Member
  • *****
  • Online Online
  • Posts: 7232
  • happily squeezing away in Devon
Re: how much "making" constitutes "making"
« Reply #46 on: August 23, 2011, 10:09:36 PM »

As you say, that's our problem over here in D/G land, no body else has 'em!
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: how much "making" constitutes "making"
« Reply #47 on: August 23, 2011, 11:37:31 PM »

I have 50, s/h,  D/G Castagnaris in my back shed. I'm just waiting for the prices to go up.  >:E  :o  :|glug
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: how much "making" constitutes "making"
« Reply #48 on: August 24, 2011, 12:40:38 AM »

Well in that case Lester you are not valuing your work enough.  Look at the labour rate you are charged when you have your care serviced,  reed work is of at least a similar skill level to car maintenance.

Btw 8 hours for that particular job seems excessive in the extreme, once you have completed your apprenticeship you should be able to bring that down by more than half.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: how much "making" constitutes "making"
« Reply #49 on: August 24, 2011, 12:50:37 AM »

Well in that case Lester you are not valuing your work enough.  Look at the labour rate you are charged when you have your care serviced,  reed work is of at least a similar skill level to car maintenance.

Btw 8 hours for that particular job seems excessive in the extreme, once you have completed your apprenticeship you should be able to bring that down by more than half.

I agree that 8 hours is a long time but, as you say, I am still serving my apprenticeship which is why my rates are low at this time of my career. Get it now whilst it's cheap!
« Last Edit: August 24, 2011, 01:03:28 AM by Lester »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: how much "making" constitutes "making"
« Reply #50 on: August 24, 2011, 01:46:11 AM »

Not sure if what I'm doing would be considered making, assembling, or producing, what I do know is I'm having great time with it. ;D

Deciding on what I buy and what I make is simple, if what I want isn't available, or not to my liking, or I feel I can make better, I make those things.  Some things, such as straps and bellows, I'd like to make, but at this point, it's not worth it for the time I'd spend learning how, and the fact that such good materials are available. But one day.......   

Some things I will never consider making, stop rods, buttons, and of course, reeds.  I turn my own stop knobs, but it is not a good return on money for time, that's just one of those things I just choose to do anyway.  One thing I wrestle with is the guy who engraves my logo has offered to laser cut the sound holes for very cheap.  I don't have a logical reason for not letting him, I would just feel I'm turning loose of too much out of my hands.

In the end, doesn't all that really matters is a person getting an accordion he is happy with, regardless of the process it took to put it in his hands?

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: how much "making" constitutes "making"
« Reply #51 on: August 24, 2011, 02:12:47 AM »

In the end, doesn't all that really matters is a person getting an accordion he is happy with, regardless of the process it took to put it in his hands?

Monsieur,
You of all people should realize that part of that person being happy with his accordion is knowing the integrity of processes involved in building it. ;)
I'm actually surprised that it's not clear that sourcing the stop rods is not the same as sourcing fulling assembled (and generic) bass boxes, keyboards, and reedblocks, and that kind of sourcing is different from contracting someone to make specific components to your designs and specifications.

And Rees, as to your post above: had you bought 50 D/G Castagnaris in 2001, and saved them to sell today, I'm sure you would have done better than had you invested the same amount of money in the stock market!!!
« Last Edit: August 24, 2011, 02:18:56 AM by Andy in Vermont »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: how much "making" constitutes "making"
« Reply #52 on: August 24, 2011, 03:08:50 AM »

 part of that person being happy with his accordion is knowing the integrity of processes involved in building it. ;)


Those are the people I'm hoping to deal with.  The Cajun music market, for the most part, could care less about aesthetics other than tradition, and mainly care about sound and playability, and some of that is based on what they've been exposed to.  That's why so many Cajun accordion builders vary so little from each other, but each has loyal followings.  But, I do times are a changing, even there.  

My point wasn't to argue with what you said, just to muddy the water a little.  8)

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: how much "making" constitutes "making"
« Reply #53 on: August 24, 2011, 09:35:52 AM »

I have 50, s/h,  D/G Castagnaris in my back shed. I'm just waiting for the prices to go up.  >:E  :o  :|glug

 Are they those counterfeit ones you made ?  ;D mory
Logged

Fidjit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 538
    • my space on My Space
Re: how much "making" constitutes "making"
« Reply #54 on: August 24, 2011, 10:22:14 AM »

Hmm. Interesting. How far back should one go to make something? First plant the seed for the tree ? Dig out the ore for to smelt to steel for the reeds ? Process the pulp to cardboard for the bellows ?

Ok I didn't do all that. But I thoroughly enjoyed my time assembling some and MAKING MOST of the parts on the two courses I was on with Emmanuel. All I can say is, "If you haven't tried it don't knock it"

My 2 & 1/2 row G/C is for sale if anyone is interested.

Cheers   :|glug

See you at Witney

Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: how much "making" constitutes "making"
« Reply #55 on: August 24, 2011, 12:54:05 PM »

Clara confirms that her dad, Bernard in essence evolved the designs and makes the woodwork and some internal structures to support Italian mechanisms and Binci reeds. We established that reed set and tuning was outsourced, last year. Yet a lot of people would consider Gaillard a top box. Some would say the best.

So what "makes" a maker?
Logged
  _       _    _      _ 

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: how much "making" constitutes "making"
« Reply #56 on: August 24, 2011, 01:11:50 PM »

Theo is probably right, the labor rate "should" be about $65-80, even a little higher for some work, and not including parts/materials,  but as an "old friend of the firm" who sends in his boxes every year for a tune up, I usually get a pretty good price.

I never grudge spending the money on people who know what they are doing; the cost of not f^%$#@* it up is "priceless".
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: how much "making" constitutes "making"
« Reply #57 on: August 24, 2011, 04:11:44 PM »

Let's take another couple of instruments and compare to melodeon making:


There are many "makers" of the Original Fender Telecaster guitars.

Let's take one who orders bodies and necks from one of the many suppliers.
All the controls and knobs  , tuners and pickups are ordered. The maker farms out the finishing.
He asembles the instrument and puts his name on it.

The next "maker"  makes the body from patterns supplied by others, orders a neck and fits pieces as above
but shoots his own finish.

The next" maker"  makes the body from a pattern, makes the neck, orders all the parts and finishes the instrument.

The next guy departs slightly from the original pattern, makes his own neck, fits bits by others and does his own finishing.

Who is a "maker" ?



BANJOS...

Shell, resonator, neck all supplied by others.  All the parts supplied by others. Finishing by others.
Assembled in house.

Above but the "maker" finishes his own product.

Above but he makes the neck.

Above but he makes the shell, the neck, all the wood bits... does his own finishing...


Who is the "maker".




Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: how much "making" constitutes "making"
« Reply #58 on: August 24, 2011, 04:15:45 PM »

Let's take another couple of instruments and compare to melodeon making:


There are many "makers" of the Original Fender Telecaster guitars.

Let's take one who orders bodies and necks from one of the many suppliers.
All the controls and knobs  , tuners and pickups are ordered. The maker farms out the finishing.
He assembles the instrument and puts his name on it.

The next "maker"  makes the body from patterns supplied by others, orders a neck and fits pieces as above
but shoots his own finish.

<snip>

Who is the "maker".

They are all makers to a greater or lesser extent. What I would do is play the guitar and if  I liked it and I liked the price I would buy it otherwise I wouldn't - simples.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: how much "making" constitutes "making"
« Reply #59 on: August 24, 2011, 04:22:07 PM »


BANJOS...

Who cares...? ;D >:E

(Just joking - honest!)
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: 1 2 [3] 4 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal