Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Anyone interested in repairing a 40/50's Galotta?  (Read 7877 times)

0 Members and 1 Guest are viewing this topic.

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Anyone interested in repairing a 40/50's Galotta?
« on: August 27, 2011, 12:49:45 PM »

Hi there,

I am new to this forum and i cannot read everything, so it is very well possible i ask a very strange question. Please don't hold it against me. :-)

Here is the thing. I own a Galotta that i once bought in an antiqueshop or something. It\s probably from just after WWII. I absolutely LOVE the sound it has. BUT it's quite unplayable because everything is rusty, the bellow is only usable to get the water out of your spaghetti, some of the plastic buttons are missing etc, etc. I have brought it to a couple of pro-repairmen/builders, they all said the cost (esp. time) to repair it would not be worth what you get in the end. OK, too bad.

But i was wondering if there was perhaps some amateur repairman who would see it as a challenge. Ofcourse i wouldnt mind paying a bit, and there is no rush, i dont mind if it takes years... Is there any such one on this forum?

The obvious solution is that i do it myself, but to be honest, i hardly know what a hammer looks like, let alone that i would do any good in the inside of a melodeon ;-)

Greetz,
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #1 on: August 27, 2011, 09:55:12 PM »

Not too many enthousiasts it seems. Was too much to hope for, i guess,
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #2 on: August 27, 2011, 11:04:10 PM »

There are enthusiasts here but not too many willing to take on an unknown quantity. "I have an old box, who'd like to fix it for free?" isn't that appealing to be honest.

Try posting pictures (external and internal if you know how) and sound files that demonstrate your enthusiasm for the box itself. How many voices does it have and in what octaves? Does it have buttons or levers that switch voices in and out?. What keys are the rows tuned to?

If it's a lovely old box then maybe someone would be willing to take it on for arts' sake. Not me though, if the box is good enough to be worthy of my attention it's far too good to be butchered by my poor skills!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #3 on: August 28, 2011, 09:53:34 AM »

There are enthusiasts here but not too many willing to take on an unknown quantity. "I have an old box, who'd like to fix it for free?" isn't that appealing to be honest.

Try posting pictures (external and internal if you know how) and sound files that demonstrate your enthusiasm for the box itself. How many voices does it have and in what octaves? Does it have buttons or levers that switch voices in and out?. What keys are the rows tuned to?

If it's a lovely old box then maybe someone would be willing to take it on for arts' sake. Not me though, if the box is good enough to be worthy of my attention it's far too good to be butchered by my poor skills!

I didnt say "for free" i am willing to pay, but yeah, i get your point. I will see if i can make some pictures and soundfiles. I can put those on here in some way? Or what is the usual way for that? (is that written somewhere on this forum?)

It is 2,5 row CF#, 8bass.
3voice: 2x8, 1x16.
I think it sounds a bit like a bandoneon, that's probably the old reeds?

thx for your reply!
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #4 on: August 29, 2011, 03:21:32 PM »

Why not try repairing it yourself?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #5 on: August 29, 2011, 07:42:43 PM »

I think it sounds a bit like a bandoneon, that's probably the old reeds?
Nope, bandoneon would LM straight tuned A=440, yours will be LMM with one of the M voices tuned sharp to give a tremolo I would think. Of course it's possible that both M reeds are tuned on pitch, then it would sound like a bandoneon of sorts!

Quote
thx for your reply!
No worries but I'd still be wary of working on a box that wasn't mine to ruin. Welcome to the forum btw, your contributions are interesting and informative  ;)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #6 on: August 30, 2011, 07:42:39 PM »

Why not try repairing it yourself?

The obvious solution is that i do it myself, but to be honest, i hardly know what a hammer looks like, let alone that i would do any good in the inside of a melodeon ;-)

::)

I think it sounds a bit like a bandoneon, that's probably the old reeds?
Nope, bandoneon would LM straight tuned A=440, yours will be LMM with one of the M voices tuned sharp to give a tremolo I would think. Of course it's possible that both M reeds are tuned on pitch, then it would sound like a bandoneon of sorts!
No, it's not the tuning that made me think that. The tuning is not that of bandoneon, but i have a feeling the reeds themselves give the sound what i mean. But it might well be something else,...what do i know, heh...

...I'd still be wary of working on a box that wasn't mine to ruin.
I would be deighted if someone were to try. It's unplayable as it is now. Can't get ay worse than that. So i wouldn't mind if t didnt work out for some reason or another.

I am still figuring out the best way to get pictures and sound known. (but i am not really a computerwizard either,..heh)

Welcome to the forum btw, your contributions are interesting and informative  ;)
thx!
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #7 on: August 30, 2011, 07:59:06 PM »

Pictures. If you have a digital camera of any kind, take pics and connect to computer via USB connection, upload to the computer. Open an account at Photo Bucket or any of the on-line photo hosts and upload the.jpg files then copy and paste a link to the picture.

Sound. If you have a webcam with a built in mic use Sound Recorder (PC) or Garage Band (Mac) to create sound files. Open an account with Sound Cloud (Login with your facebook id if you have one) upload sound files the post a url here.

Simples  ;)

If you are really not in a hurry and you will risk my amateur skills I may consider this as a project...
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #8 on: September 01, 2011, 07:13:45 PM »

i should have a little time tomrrrow to try and have a go
:-)
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #9 on: September 07, 2011, 12:27:11 AM »

i should have a little time tomrrrow to try and have a go
:-)
W

Ok, "tomorrow" didnt work,...

but here are some pictures and sound files

http://www.wouterkuyper.nl/files/foto/Galotta1.jpg
http://www.wouterkuyper.nl/files/foto/Galotta2.jpg
http://www.wouterkuyper.nl/files/foto/galotta3%20treble.jpg
http://www.wouterkuyper.nl/files/foto/galotta4%20treble.jpg
http://www.wouterkuyper.nl/files/foto/galotta5%20bass.jpg

http://www.wouterkuyper.nl/files/mp3/Galotta%20amsterdam%20waltz.mp3
http://www.wouterkuyper.nl/files/mp3/Galotta.mp3

I am especially into the sound of the LMM, not so much on the MM only. (the start of the amsterdam waltz is MM only)
Please listen only to the melodeon, and not to me :-) I got the sound from the voice recorder on my phone, and it's a one-take thingy...

Feel free to look around and comment on my site anyway, for other soundbites as well.

Greetz!
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #10 on: September 13, 2011, 08:06:33 PM »

Wouter, this is a lovely sounding box so the work I would be prepared to do on it is limited to re-valving and re-waxing the reed plates, refacing pallets, replacing bellows gaskets, retaping/patching the bellows if needed. i.e. Anything and everything mechanical but I'm not touching those reeds, they deserve the magic only a proper accordion tech can provide.

You could however tempt me to buy the box from you ...  ;)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #11 on: September 13, 2011, 08:14:55 PM »

For an "unplayable" box that sounds pretty damn good to me!
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #12 on: September 13, 2011, 08:23:06 PM »

For an "unplayable" box that sounds pretty damn good to me!

Well exactly. A touch out of tune perhaps, a bit wheezy here and there but basically a lovely sounding box with great character that needs a master's hand to breath another fifty or more years of life into it.

Now, where did I leave that Stradivarius and my angle grinder?  :|glug
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #13 on: September 13, 2011, 10:50:20 PM »

for some reason i didnt see any reply coming up...and now there are! Strange! The thing that makes the box unplayable is two main things: the bellow needs a lot of work, but whatks perhaps most important... The levers that need to close the holes don't always do so. ...my english vocabulary is a problem here...heh.. Uhm, the levers have too much freedom, is that understandable? I hope iam saying what i mean to say ;-)

will mail you when i get home,
w
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #14 on: September 13, 2011, 11:28:49 PM »

my english vocabulary is a problem here...heh.. Uhm, the levers have too much freedom, is that understandable? I hope iam saying what i mean to say ;-)

I see no problem at all with your English vocabulary, it's actually very good, although I do struggle to understand the term 'the levers have too much freedom' so perhaps you don't have the technical terms needed to express yourself precisely but that's hardly a failing!

If the levers have 'too much freedom' does that mean that they lift up too high away from the holes or that they shift sideways when you press the buttons, or indeed both? I'm a bit picky at times about English usage but I'm far from a scholar. I've seen your requests for your English to be corrected but there is little, if anything, that is worth mentioning to be honest. Ask your questions in your own words, if there are queries we will post them but I suspect most of the questions will be about the technical details of your box and never about your conversational English!

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #15 on: September 14, 2011, 01:00:35 AM »

my english vocabulary is a problem here...heh.. Uhm, the levers have too much freedom, is that understandable? I hope iam saying what i mean to say ;-)

I see no problem at all with your English vocabulary, it's actually very good, although I do struggle to understand the term 'the levers have too much freedom' so perhaps you don't have the technical terms needed to express yourself precisely but that's hardly a failing!
i indeed dont have the needed technical terms, nor the terms to say so ;-) Or usually i can find the words hidden somewhere, but it just comes to me so slowly.... but thx for the kind words.

If the levers have 'too much freedom' does that mean that they lift up too high away from the holes or that they shift sideways when you press the buttons, or indeed both?...
I meant to say they shift sideways; if i let go of the button, sometimes the holes aren't completley covered anymore, and a tone keeps yammering on. And a similar problem: when pushing some buttons in far, the levers hit the ironwork of covering levers, so they open as well...

W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #16 on: September 14, 2011, 08:13:50 AM »


I meant to say they shift sideways; if i let go of the button, sometimes the holes aren't completley covered anymore, and a tone keeps yammering on. And a similar problem: when pushing some buttons in far, the levers hit the ironwork of covering levers, so they open as well...

W

A difficult problem to fix, usually it means that the axle or bearing that the lever rotates on is worn.  I suspect the bearing is wood in yours so you will need to replace the worn parts, or fit a thicker axle.  Neither is an easy job.  This is one of the reasons why cheap accordions are cheap and why they are difficult and unsatisfying to repair.

You say that the instrument dates from the 40s/50s which puts into the GDR era when the East German factories pruduced some of the worst built boxes ever in the history of accordion building.    You would be much better to abandon this project and get something that at least has the potential to be a decent player.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #17 on: September 14, 2011, 11:29:29 AM »


I meant to say they shift sideways; if i let go of the button, sometimes the holes aren't completley covered anymore, and a tone keeps yammering on. And a similar problem: when pushing some buttons in far, the levers hit the ironwork of covering levers, so they open as well...

W

A difficult problem to fix, usually it means that the axle or bearing that the lever rotates on is worn.  I suspect the bearing is wood in yours so you will need to replace the worn parts, or fit a thicker axle.  Neither is an easy job.  This is one of the reasons why cheap accordions are cheap and why they are difficult and unsatisfying to repair.

You say that the instrument dates from the 40s/50s which puts into the GDR era when the East German factories pruduced some of the worst built boxes ever in the history of accordion building.    You would be much better to abandon this project and get something that at least has the potential to be a decent player.

Yeah, i was afraid that was going to be the difficult thing. The axle is not wood though, it's something metal-like. And also, the instrument doesnt feel like it was cheap once (and i see a lot of cheap recent instruments in my practice), although ofcourse i cannot be sure. And it's been played on heavily, heh.
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #18 on: September 14, 2011, 11:43:13 AM »

I've just gone back and looked at the pictures, it may be older than you indicated.   If it does not say "Made in GDR" I would think it may be pre-WW2 when quality would have been better.

Can you post a picture of the mechanism?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Anyone interested in repairing a 40/50's Galotta?
« Reply #19 on: September 14, 2011, 12:00:25 PM »

I've just gone back and looked at the pictures, it may be older than you indicated.   If it does not say "Made in GDR" I would think it may be pre-WW2 when quality would have been better.

Can you post a picture of the mechanism?

The time-indication was given to me when i bought it, but i have no idea how much that person actually knew, so it might indeed have been older.
I cant give you a picture right now, a friend of mine read this thread and said he would like to take a look inside, so he has it at this moment. When i get it back i will post it asap,

W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal