Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: bass strap position  (Read 2492 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
bass strap position
« on: August 27, 2011, 09:18:27 PM »

I have a corona II that is very comfortable for me to play.  I also have an Erica that feels uncomfortable for my left arm.  Even though it is rounded the edge of the box wants to dig into my arm. If I stretch the bass strap out away from the box and measure the maximum distance from the strap to the box is the same for each box.  What is not the same is the bass strap on the Erica is about 2cm closer to the bass buttons than it is on the Corona.  This is , of course because the Erica is a smaller box.  Has anyone experimented with moving the bass strap away from the bass buttons and toward the body for comfort. I know there has been a lot of talk about the Pokerwork edge digging in to the arm and I've seen all sorts of padding suggestions but I haven't heard of moving the bass strap.  I really can't see why it should cause a problem but I wanted to hear if anyone has done this.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: bass strap position
« Reply #1 on: August 27, 2011, 09:33:53 PM »

I'm tired and have had a few beers but -

As the Erica is less tall than the Corona would the same measured distance from box to strap not mean a tighter strap on the Erica?  :|glug

You could try unscrewing the Erica strap and reattaching it, temporarily, using the front screw hole on the strap to the back screw hole on the box thus moving the strap towards the rear of the box (did I say I have had a beer). This will move the strap back a bit and may inform your decision?

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: bass strap position
« Reply #2 on: August 28, 2011, 12:37:00 AM »

Excellent suggestion Lester.  It allowed me to determine that it was not very helpful without drilling any holes.  I tried adjusting the tightness of the strap already and it didn't seem to help either.  I guess I just need to figure out how to hold it differently.  It must be a common problem judging from the number of folks who use padding on the arm or on the box.  The round edge of the Erica helps a lot.  I may just put up with it and get a callous to go with my 'Real Men Play Accordion' shirt. ::)
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: bass strap position
« Reply #3 on: August 28, 2011, 08:14:59 AM »

Another suggestion is to do what I have just done on my Super Pokerwork and replace the bass strap with one of these:

http://www.cgmmusical.co.uk/CGM_Musical_Services/Bass_Straps.html#17

Far more comfortable and fully adjustable. Only downside is I had to fit new bigger feet as it falls over when put down with the thicker strap  (:)

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: bass strap position
« Reply #4 on: August 28, 2011, 11:42:16 AM »

I have a corona II that is very comfortable for me to play.  I also have an Erica that feels uncomfortable for my left arm.  Even though it is rounded the edge of the box wants to dig into my arm. If I stretch the bass strap out away from the box and measure the maximum distance from the strap to the box is the same for each box.  What is not the same is the bass strap on the Erica is about 2cm closer to the bass buttons than it is on the Corona.  This is , of course because the Erica is a smaller box.  Has anyone experimented with moving the bass strap away from the bass buttons and toward the body for comfort. I know there has been a lot of talk about the Pokerwork edge digging in to the arm and I've seen all sorts of padding suggestions but I haven't heard of moving the bass strap.  I really can't see why it should cause a problem but I wanted to hear if anyone has done this.

It's one of many matters of ergonomics that are often not thought about by melodeon makers. On my Oakwood (which is the same depth as an Erica) I had the strap positioned about 1cm to the rear of the centre point of the box, so it falls more on the back of the hand -- sounds like a small change but it makes a big difference.

Another key point is that if you play with one strap and -- especially when playing standing up -- find that the treble end tends to rotate clockwise when you push, try moving the top strap hanger forwards by a centimetre or two (until the box stops rotating -- may take a couple of tries to get it right).

I've suggested this to several other people having the same problem and they've all said "wow, what a difference".

Cheers

Ian

(about to sit down for a session with the Baffetti Binci I picked up from The Music Room yesterday after accidental removal and Dedic tuning :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: bass strap position
« Reply #5 on: August 29, 2011, 11:44:53 AM »

It seems to be the norm for makers to simply plonk the strap in the middle of the available space, but then its got to try to suit every size of player, so fair enough.  The one exception I have is the Preciosa, which has the strap offset to the back of the box.  Unfortunately, the strap is only an inch wide, so no-one makes an adjustable strap to suit. :(

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: bass strap position
« Reply #6 on: August 29, 2011, 11:47:59 AM »

Unfortunately, the strap is only an inch wide, so no-one makes an adjustable strap to suit. :(

Nothing to stop you fitting a wider strap!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: bass strap position
« Reply #7 on: August 29, 2011, 03:27:24 PM »

Well, the original fitting is through a slot on the edge of the bass board and it sort of looks right...  I've been toying with the idea of paring down the ends of a velcro adjustable strap just to avoid doing an external mounting - but nothing is going to look as neat as the original, but it would be nice to get blood flowing in my left hand again. ;D 

Rob.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: bass strap position
« Reply #8 on: August 30, 2011, 01:28:08 PM »

It seems to be the norm for makers to simply plonk the strap in the middle of the available space, but then its got to try to suit every size of player, so fair enough.  The one exception I have is the Preciosa, which has the strap offset to the back of the box.  Unfortunately, the strap is only an inch wide, so no-one makes an adjustable strap to suit. :(

Rob.

I don't think it's anything to do with suiting any player, it's basic ergonomics which melodeon makers aren't thinking about.

Since the bass buttons on most (all?) melodeons are (too?) close to the edge, you have to arch your hand/fingers away from the bass end to play the buttons, and the strap shouldn't be pressing on the arched back of your hand.

For bigger deeper instruments the middle turns out to be the right place for the strap. For smaller shallower ones it isn't, but instead of thinking about it most makers still plonk the strap in the middle.

Being an engineer who thinks about *everything*, I made lots of small changes to the design when Martyn was making my Oakwood (the first Model 4):
-- move the bass buttons further away from the edge (less than 1cm but means less hand arching is needed)
-- move the LH strap about 1cm towards the rear
-- move the air button towards the top so it falls under the thumb better
-- bigger pallet on the air button to get faster air filling
-- angle the RH keyboard backwards at a bigger angle
-- move the RH buttons further from the edge of the keyboard (by extending the keyboard)
-- angle the edge of the keyboard back and shape to fit thumb (but with rounded edged for playing standing up)
-- close the RH button spacing up about 1mm to make reaching accidentals over low notes easier
-- move strap hangers forwards to prevent box rotating when playing standing up with single strap

Lots of small things but they add up to a big difference -- the Binci sounds great and is technically lovely to play, but is considerably less comfortable than the Oakwood, my hands hurt more especially after several hours playing...

Cheers

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: bass strap position
« Reply #9 on: August 30, 2011, 02:08:52 PM »

Yes, I can see that those changes would make a big difference especially those on the bass side.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal