Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Inside a Preciosa  (Read 3351 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Inside a Preciosa
« on: August 31, 2011, 06:07:22 AM »

 ;D ;D ;D I won a Preciosa on Ebay last week and it just arrived in the mail! ;D  ;D

So in celebration I took lots of pictures both inside and out to document what it looks like before repair.

It's in C/F and I don't have the courage or the skills to tune it, but I know I can deal with getting it more airtight. I am concerned about the rust on some of the reeds though. I took several pics of rusty reeds. I don't know how bad it really is yet, how deep the pits.

I was especially glad to be able to take out the upper treble reed block to see how the blocks are installed. And I'd like to know just how Theo and Ukebert managed to fit reeds for a 12 button bass into that small space. I know the blocks and bass end comes from a Regina, but this thing is small!!! Are the bass reeds in the Regina cut down in size the way the treble reeds in the Preccy are?

Having fun playing with this even though it's way out of tune. Oh, it's also club tuned so I'll need to figure out how to get it changed to standard tuning as well. I'd like it to be in D/G but don't know if that's too difficult a move from C/F.

Ed

« Last Edit: August 31, 2011, 06:09:44 AM by Telemorris »
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: Inside a Preciosa
« Reply #1 on: August 31, 2011, 07:51:20 AM »

Mike Roebotham in St Ives specialises in vintage Hohner rebuilds, and I know he has done a few Preciosa's. Also, Theo Gibb is experienced here, and coincidentally has a D/G Preciosa for sale.
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

John C

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 124
Re: Inside a Preciosa
« Reply #2 on: August 31, 2011, 01:13:11 PM »

Congrats on your purchase - fascinating to see the photos and the work involved.    I'd appreciate knowing what you decide to do and a few photos of of your progress - would be of great interest to me.

Thanks for posting




Logged
Saltarelle Laurentide GCF, Saltarelle Cheviot ADG

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Inside a Preciosa
« Reply #3 on: August 31, 2011, 01:31:13 PM »


I was especially glad to be able to take out the upper treble reed block to see how the blocks are installed. And I'd like to know just how Theo and Ukebert managed to fit reeds for a 12 button bass into that small space. I know the blocks and bass end comes from a Regina, but this thing is small!!! Are the bass reeds in the Regina cut down in size the way the treble reeds in the Preccy are?


Congrats on your buy - it looks in really nice nick ( before you took it to bits of course!  ;D ) Re: 12 bass - it just so happens that the Regina bellows are exactly the same size and shape as the preciosa, so you literally can swap it out if you have a Regina to hand. Of course, the bass pushrods need to be moved, and optionally you can take out the piano accordion rake of the buttons with a bit of Theo cunning (or Ukebert's custom chord layout is a neat solution too). The Regina only has 3 reeds per bass chord though; the preciosa has 4, which is how it's possible to fit the extra chords in the Regina.

Both MikeR and Theo have done work on my preccy; MikeR restored/tuned it originally, and Theo did the 12 bass conversion. I think they both did amazing jobs and I'd recommend either of them without hesitation. Theo documented the 12 bass conversion job on his website - look in workshop stories, and you should find photos of the work he did. The result is an astonishingly fun box to play!

Cheers,

Clive

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Inside a Preciosa
« Reply #4 on: August 31, 2011, 07:27:29 PM »

I wish I could take this Preccy to Theo, Mike, or Martyn. However, I live in the US - Portland, Oregon to be exact and can't see sending the Preccy all that way. I need to find someone here in the States who has worked on restoring Preciosas and knows what he or she is doing.

The current plan is to simply restore the instrument by replacing worn gaskets and pallet leathers, declub, and tune it up to A440 (it's currently at A430 or so). Not sure about changing the basses though so that will wait till I've played it for a bit. I may eventually want to change to D/G, I think though I'm not sure about that.

I found a reference in the archives about taking a reed plate from the same era and using that to substitute for the C/C plate rather than trying to tune up a whole note. I ran into a post from Theo saying he'd filed down a standard Hohner reed plate to replace one that was missing in a Preccy so I think I may be able to make the replacement as long as the T and H reeds are interchangeable. The treble reed plates in the Preccy are zinc "T" plates. I have an older Hohner PA with zinc "H" reeds and could use the C#/C# reeds. I know the sides would need to be filed or milled down to match the 15mm width of the existing reeds but that seems fairly doable. I do not know though whether there would be a difference in quality between the T and the H reeds even if both are in a zinc plate. The PA is from about 1950 or so with Zinc "H" reeds in the treble and aluminum "H" reeds in the bass. Can anyone speak to this issue?

I'm really looking forward to getting the Preccy up and running. I can tell from the little playing that I've done that it's very responsive, much more so than my Erica. The Erica is rather heavy handed, needs more energy to play and is unable to play at a low volume with a good range of dynamics. This little instrument  does so with ease.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Inside a Preciosa
« Reply #5 on: August 31, 2011, 07:55:07 PM »

If you have a choice of reed plates from the old Hohner PA I would use the D plates rather than the C# ones. With C# you need to take one reed up a semitone and the other down a semitone, with the D plates you need to fine tune one reed and lower the other a whole tone which is easily done with a blob of solder on the tip of the reed. This is what I did with a Club box quite recently, I also tuned and kept the original C/C reeds so I can turn it back into a Club box quite easily.

If you de-Club the basses that's a different story, I didn't have that option with my box.

Pete
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Inside a Preciosa
« Reply #6 on: August 31, 2011, 08:03:00 PM »

I'd go a little further than Pete and suggest you choose a pair of H reeds that have a similar length of reed tongue to the existing C/C this might be a D or might be even higher.  The reeds used in Preciosas have a shorter scale length than bigger Hohners.  To get a similar response you should lower the pitch by thinning the lower third or so of the reed tongue rather than weighting with solder.  This appears to be the way all the Preciosa reeds have been produced to achieve the shorter scale length.  One consequence is that Preciosa (and Liliput) reeds have a greater tendency to drop in pitch when played very hard.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Inside a Preciosa
« Reply #7 on: August 31, 2011, 08:11:04 PM »

Thank you Theo! Very helpful. And I'll try lowering the pitch on a scrap reed in the way you suggest to experiment and learn how to do it. Don't want to ruin a zinc reed!

Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Inside a Preciosa
« Reply #8 on: September 01, 2011, 12:16:49 AM »

I'd go a little further than Pete and suggest you choose a pair of H reeds that have a similar length of reed tongue to the existing C/C this might be a D or might be even higher.  The reeds used in Preciosas have a shorter scale length than bigger Hohners.  To get a similar response you should lower the pitch by thinning the lower third or so of the reed tongue rather than weighting with solder.  This appears to be the way all the Preciosa reeds have been produced to achieve the shorter scale length.  One consequence is that Preciosa (and Liliput) reeds have a greater tendency to drop in pitch when played very hard.

Ahhhhhhhh.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

nathanfisher

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Inside a Preciosa
« Reply #9 on: September 01, 2011, 07:34:34 AM »

Ed,
I saw that auction and thought about bidding on it! Your lucky I didn't because it would have ended up costing you a lot more  ;)

Thanks for the pictures because I didn't want to buy it, I just wanted to look under the hood . It is interesting to see how the reed blocks are stacked on the treble side.

Luckily I found another small accordion to buy. I haven't received it yet but here is the completed auction..

http://www.ebay.com/itm/260838466499?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_1400wt_1185

As you can see that it looks similar to a precioca only with two rows. I'll open it up and take pictures when I get it so everyone can see it. I have no idea what key it is in  or the condition of the bellows and reeds. I guess it will be a surprise.

Nate
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Inside a Preciosa
« Reply #10 on: September 01, 2011, 10:20:22 PM »

I just found the serial number for the Preciosa.

26 0693

Is there any way to check the date of manufacture?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Inside a Preciosa
« Reply #11 on: September 01, 2011, 11:27:13 PM »

Ahem. I was the losing bid on this instrument.

1) Apologies for pushing you higher than you otherwise might have gone.
2) Glad that it went to a Melnet member.

Logged
Harmonica Player
Just starting with the Box

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Inside a Preciosa
« Reply #12 on: September 01, 2011, 11:55:54 PM »

Ahem. I was the losing bid on this instrument.
1) Apologies for pushing you higher than you otherwise might have gone.
2) Glad that it went to a Melnet member.

I'm glad I got this one. It's in fairly decent shape so I'm not unhappy about the price. Looking forward to the restoration and playing.

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Inside a Preciosa
« Reply #13 on: September 02, 2011, 12:40:16 AM »

It's a tough shout. We're all friends here but we're all haggling over the same few boxes. Not easy and we shouldn't be offended if someone else wins. If I want it badly enough I'll bid enough to win. If you don't, that's just too tough to gripe about  ;)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal