Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4   Go Down

Author Topic: First project  (Read 10336 times)

0 Members and 1 Guest are viewing this topic.

nathanfisher

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: First project
« Reply #20 on: September 04, 2011, 10:55:11 PM »

For my first project I decided to bid low on an old Hohner presswood 2 row.  I live in the US and there seems to be quite a few of those on Ebay. I managed to win the auction for a little over 100$ plus a reasonable shipping fee. You might be able to bid on something from the US and have it sent over to you? The exchange rate is definitely in your favor if the seller will ship international.
  The reeds turned out to be C/F so I will probably use those in the future to practice my tuning skills. The fingerboard is broken and will need to be replaced or fixed. The bellows are usable and the pads need new felt and leathers.  Surprisingly the presswood is a very solid wood box and the components are the same quality as a pokerwork or erica. From what I can tell it is made of solid Alder with the usual plywood soundboard. Pokerworks and Ericas sell for 2 to 4 times the price.

Most of the work I can do myself but I decided to buy some D/G reeds from Michael @ Dancemaster accordion. He loaded up a set of reeds on some old Hohner reedblocks and I installed  the reedblocks in the accordion myself. You wouldn't believe how good an old presswood can sound with good reeds in it. I have bought three accordions from Michael and I am very pleased with the work that he does.
http://www.irishdancemaster.com/accordion.html

Just my 2c in a sea of opinions!

Logged

Just4Fun

  • Guest
Re: First project
« Reply #21 on: September 04, 2011, 11:18:30 PM »

So what are the more common boxes that have removable reed blocks? I feel that since I'm heading into this dark abyss I might as well go the whole hog and try to learn a bit about tuning as well.
Logged

nathanfisher

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: First project
« Reply #22 on: September 05, 2011, 12:40:33 AM »

Most accordions have removable reed blocks, except for the few that have the reedblocks permanently mounted onto the sound board like a one row cajun accordion or a Castagnary Lilly (just to name a few)

Here is a short video to show you how removable reed blocks are mounted onto the inside of an accordion!

http://www.youtube.com/watch?v=Ee1VSeALd6g&feature=related
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: First project
« Reply #23 on: September 05, 2011, 01:18:48 AM »


  The reeds turned out to be C/F so I will probably use those in the future to practice my tuning skills.


Oh no you won't!. 

Hohner reeds of that vintage are highly desirable and irreplaceable, they are far too good to be used for practice by a novice. It'd be like using an E-Type Jag in a demolition derby...
Logged

nathanfisher

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: First project
« Reply #24 on: September 05, 2011, 02:31:32 AM »

Irreplaceable? Yes! Highly desirable? The faces of the reedplates are tarnished, the reeds are riddled with rust and the person who tuned the reeds before me was not very kind.  If you insist then I will practice my tuning skills on a Chinese toy melodeon and sell you the c/f reeds if you think they are so valuable. (:)
Logged

Just4Fun

  • Guest
Re: First project
« Reply #25 on: September 23, 2011, 10:08:25 AM »

Back from my travels and I've seen a "vintage" Hohner single row with two stops. I don't have a model number but it's got spoon type base and an anchor logo next to the 'Hohner' stamp. Does anyone know what it would be like to work on (assuming it needs it and it looks as though it would)? Just as a reminder, I'm a total beginner when it comes to maintenance etc. but wanting to learn.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: First project
« Reply #26 on: September 23, 2011, 06:20:04 PM »

It could be a HA112 - just like a cajun four-stop, but with only two stops.  They're less frequently seen than the three and four-stop versions (HA113, HA114) and rarely used in performance, more of a home instrument.  They have all the characteristics of a four-stop, but being only two voice, MM, thye lack the grunt and bite of the full blown model.

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: First project
« Reply #27 on: September 23, 2011, 07:20:25 PM »

As far as learning to repair it goes it has better access to the reeds than a Hohner 4-stop.  Reedblocks are not removable, but with only one block in this model you have full access to the reeds on both sides.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Just4Fun

  • Guest
Re: First project
« Reply #28 on: September 23, 2011, 10:32:32 PM »

Thank you everyone for your wisdom. It might be a starter...
Logged

Just4Fun

  • Guest
Re: First project
« Reply #29 on: September 24, 2011, 05:56:48 PM »

Well I got bored with trying to be grown up and sensible and have just got a Club 11b through eBay. I probably paid a bit over the odds for it but what the heck. Going by the photos it definitely has seen better days and according to the description "a couple of the notes sound a little low". No doubt, the full horror will become clear in due course. If people don't mind I'll do a couple of photos and a sound clip, post them on here and await your advice. Perhaps any work that I do could be posted here by way of a bit of a journal for future novices such as myself. Just to verify my total ignorance: I have heard people mention a mysterious phrase "I have de-clubbed it". Is this painful and is it something I should consider?
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: First project
« Reply #30 on: September 24, 2011, 06:43:02 PM »

Just to verify my total ignorance: I have heard people mention a mysterious phrase "I have de-clubbed it". Is this painful and is it something I should consider?

*Sharp intake of breath* Ignorance varified, no worries!  >:E

You'll need to find out what a Club box is first. Check out the keyboard layouts on the main site.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: First project
« Reply #31 on: September 24, 2011, 06:43:52 PM »

Well I got bored with trying to be grown up and sensible and have just got a Club 11b through eBay. I probably paid a bit over the odds for it but what the heck. Going by the photos it definitely has seen better days and according to the description "a couple of the notes sound a little low". No doubt, the full horror will become clear in due course. If people don't mind I'll do a couple of photos and a sound clip, post them on here and await your advice. Perhaps any work that I do could be posted here by way of a bit of a journal for future novices such as myself. Just to verify my total ignorance: I have heard people mention a mysterious phrase "I have de-clubbed it". Is this painful and is it something I should consider?

Ah, you bought that one.  I pulled out when it got to more than I was prepared to pay.  "De-clubbing" refers to changing the Club system layout to the conventional 2-row layout; in the Club system there is a button in the middle of the inner row that plays the same note in both directions (called a "gleichton"). The reasons for its being there need not concern us here, but if you want to play it as a conventional 2-and-a-half row that pair of reeds needs to be replaced by a pair playing the two notes you'd expect if it wasn't a Club. Hope I'm making myself clear - it's late, warm and humid where I am and it's been a long day!  Also, in an "ordinary" 2-row the inner row basses at the "knee" end play the same note & chord in both directions, whereas in a Club they don't. With my de-clubbed Hohner I decided to leave the basses as nature intended, as I rarely use that pair of buttons on the push anyway - some people prefer to de-club both ends.  In addition, the arrangement of notes on the "helper" row may or may not be what you expect, so you may decide to make some changes there. In my case, while I had the box in bits I decided rather than simply de-clubbing it to echo the layout on my Saltarelle with a 4th-button start, so that now the fingering for any given tune is exactly the same on the D/G Saltarelle or the Bb/Eb Hohner. I hope that makes some kind of sense.........

I should add that my Club is a Club II 21+4 - you have a longer helper row on a IIb, so more choices to consider!

Best of luck
Graham
« Last Edit: September 24, 2011, 06:49:50 PM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Just4Fun

  • Guest
Re: First project
« Reply #32 on: September 24, 2011, 07:14:47 PM »

Thank you Graham. I had a rough idea but you have described it brilliantly and now I have a very clear idea of what it is all about. Though not the foggiest yet about how it all works inside. In an ideal world I would expect I'd like to finish up with a layout similar to my Hascy which, I've actually had changed to a fourth button start, but no doubt those imaginings are rather far in the future. Obviously much depends on the state of the box when it arrives but a more realistic aspiration at this stage might be, for starters at least, to change the Gleichton. It's all got rather hot and humid here too but that's nothing to do with the climate and will no doubt get far worse when bellows pins start flying across the room.
I'll be back,
Ollie
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: First project
« Reply #33 on: September 24, 2011, 07:29:09 PM »

I have a Club IIIB that I recently de-Clubbed on the treble end, the bass end couldn't be altered as it had a clever mechanical arrangement to share reeds in the chords. If you do de-Club the treble end you might like to consider retaining the original gleichton reed plates and replacing them with donor reeds so that it can be re-clubbed if the fancy takes you.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Just4Fun

  • Guest
Re: First project
« Reply #34 on: September 24, 2011, 09:13:11 PM »

So here starts the litany of questions that I will one day look back at and think 'oh gawd, I can't believe I asked them that'.
Reeds/Plates. Where do I get them and what should I be looking for? I would imagine it would need to be as per the others already being used.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: First project
« Reply #35 on: September 25, 2011, 12:32:00 AM »

So here starts the litany of questions that I will one day look back at and think 'oh gawd, I can't believe I asked them that'.
Reeds/Plates. Where do I get them and what should I be looking for? I would imagine it would need to be as per the others already being used.

Therein lies a question! The donor reeds I used came from a scrapped piano accordion I bought for a tenner on ebay. They didn't really match the existing reed plates so the whole issue was more one of butchery, rather than any kind of scientific exercise. I was quite pleased with the outcome but I might just have been more than a little lucky!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: First project
« Reply #36 on: September 25, 2011, 06:27:10 AM »

The ones I used to replace my gleichton plates also came from a scrap PA - a Hohner with H reeds which cost me £12 on ebay. I needed to replace my Bb/Bb with Bb/C, so I used the"B" reeds rom the PA, flattened one side to Bb and sharpened the other to C.  The reeds I needed to adjust the layout to match the Saltarelle came from another couple of scrap Hohners, a 2-voice C and a 4-voice G, both of which were well past saving (I paid £10 for the C at a flea market and £30 - probably too much really - for the G) so I had a reasonable supply of replacement Hohner reeds to hand. There are now a couple of T reeds in with the original H reeds in the Club, but they honestly don't sound any different and they are all Hohner. I make an occasional habit of picking up cheap past-repair boxes to cannibalise for parts - they do have to be really cheap - and have harvested a stock of replacement reeds this way.  Occasionally used reeds crop up on ebay.  You can buy new reeds from Charlie Marshall (or direct fron Hohner), but I quite enjoy dismantling otherwise useless old boxes; you get a lot of usable spares for not much outlay and you learn a lot about how the boxes work and how they were built.  Also good advice to hang on to the plates you take out - never throw usable reeds away!
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Just4Fun

  • Guest
Re: First project
« Reply #37 on: September 25, 2011, 09:22:32 AM »

Once again, really useful and much appreciated advice from everyone. The obvious first step is to take delivery of and find out the state of the box but I look forward to getting my hands dirty (Mr. Chinnery from The League of Gentleman comes to mind). I also look forward to searching for old wrecks and spares. I'll let you know when the thing arrives.
Ollie
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: First project
« Reply #38 on: September 25, 2011, 11:07:13 AM »

By chance there are two lots of Hohner PA reeds & blocks on ebay now; mind you, they're off a biggish box, and that would be an awful lot of unisonoric reeds to have lying around the workshop!
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Just4Fun

  • Guest
Re: First project
« Reply #39 on: September 25, 2011, 11:40:48 AM »

I saw those (one set of treble and one of base?) and was wondering if that would be a good place to start. Thanks Graham, you're a god send. How's the humidity?
Logged
Pages: 1 [2] 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal