Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Leather and felt for pallets  (Read 12272 times)

0 Members and 2 Guests are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Leather and felt for pallets
« on: September 01, 2011, 09:14:50 PM »

My question is about quality of leather and felt for resurfacing pallets. I know CGM supplies felt/leather sandwich material in several different types. Which is the best quality or most likely to provide the best seal for resurfacing my pallets?
  1. Persian leather and felt
  2. Hohner leather and felt.

I happen to have plenty of the Hohner variety to resurface the pallets for my Preciosa rebuild but would need to reorder and wait for a few weeks for the Persian variety.

Another option I can pursue is to use some Organ builders leather, very thin (.5 - .8 mm, even thickness throughout) and extremely high quality and smooth on the flesh side. I could make my own leather/felt sandwich material with this leather. If I use this leather, the leather would provide very little grain in the flesh side of the leather. However the flexure or dimple that fits the soundboard hole would come from the felt because of the thinness and suppleness of the leather. The CGM leather is probably 2mm thick or so and has some surface stiffness to it such that the leather alone takes the impression of the soundboard hole.

Related question: What kind of leather surface provides a quieter impact (Hohner instruments being famous for the slapping sound of a pallet hitting the soundboard)? Given two pieces of leather with the same thickness and other characteristics, is it better to have a rougher surface, for example suede, or a smoother surface with no grain or texture?

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

East Clare Box Player

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Leather and felt for pallets
« Reply #1 on: September 02, 2011, 04:13:15 AM »

I can share what I use for melodeons...I use sheets of 1/16" wool felt, available in fabric stores.  To this I glue (using 3M spray mounting adhesive, like they use in picture framing shops) chamois leather, most often used for washing/drying autos.  I have had wonderful results with this.  The layer of felt really dampens the "percussive effects" of Hohner pallets.  I always use the rough side of the leather toward the soundboard.  All the commercially available leather/felt sandwiches I've seen are rough-side out.  You want the grain side, which is smoother, to provide a better adhesive surface for the spray adhesive.

For piano accordions, I use a thicker leather and felt.  It must be supple.  You want to handle it and bend it before you buy. 
Best to you and keep bringing those melodeons back from the dead!

Robert in San Francisco
Logged
Your mileage may differ.  Mine does.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Leather and felt for pallets
« Reply #2 on: September 02, 2011, 05:16:56 PM »

I have used different thicknesses of leather and I haven't noticed much impact on the sound of the pallets hitting home.  The thickness of the felt has much more of an impact on dampening the sound as does reducing the height from which the pallet slams down.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Leather and felt for pallets
« Reply #3 on: September 02, 2011, 05:36:10 PM »

Hi Watlzman,

I think there are several variables here that have a bearing on the sound of the pallet as it hits the soundboard.

  1. The first is the thickess of the materials both leather and felt
  2. The stiffness of the leather and/ or the felt
  3. The surface roughness of the leather that is in contact with the soundboard.

I suspect that each one of these variables has some effect. Maybe the surface roughness isn't that important but it's worth thinking about. I think a smooth surface will create a better seal but may also contribute to the slapping sound. I have a feeling a rougher leather surface will provide channels for air to escape as the pallet makes contact, possibly lessening the tendency to have a pallet with a miniature cup to it (I have a mental image of hands clapping and the cupped shape of the palms). I know I'm guessing at the different effects. Limiting the button travel and therefore the height of the pallet above the soundboard might make the biggest difference.

Anyone played with these variables?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Leather and felt for pallets
« Reply #4 on: September 02, 2011, 05:38:31 PM »

two other variables that have an effect:

4 The strength of the springs
5 the size of the pallet
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Leather and felt for pallets
« Reply #5 on: September 02, 2011, 05:56:58 PM »

Thanks Theo,

In your experience, what is the order of importance of all these variables?

  1. The thickess of the materials both leather and felt
  2. The stiffness of the leather and/ or the felt
  3. The surface roughness of the leather that is in contact with the soundboard.
  4. The strength of the springs
  5. the size of the pallet
  6. The height of the pallet above the soundboard
« Last Edit: September 02, 2011, 05:59:09 PM by Telemorris »
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Leather and felt for pallets
« Reply #6 on: September 02, 2011, 05:58:33 PM »

Presence or absence of felt behind the leather is the most important by miles.  Then I suspect thickness of felt. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Leather and felt for pallets
« Reply #7 on: September 02, 2011, 06:02:07 PM »

Hi Watlzman,

 Limiting the button travel and therefore the height of the pallet above the soundboard might make the biggest difference.

In my (limited) experience reducing the pallet height has the greatest effect.    On the treble side, new felt and leather and checking the button travel with the strip of wood under the lever arms nearly eliminated the treble pallet noise on my Erica.  With the basses I could not find a good way to limit the button travel in a similar manner so I just increased the thickness of the felt to reduce the pallet height.  I also put two little strips of very thin self sticking felt in the bass button holes to quiet the button noise.  My Erica no longer makes any rattles or clacks.   It is remarkable how much difference these modifications made.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Leather and felt for pallets
« Reply #8 on: September 02, 2011, 06:07:55 PM »

My post and Theo's crossed in cyberspace.  He certainly has more experience than I do.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Leather and felt for pallets
« Reply #9 on: September 02, 2011, 07:32:40 PM »

Hi Watlzman,

 Limiting the button travel and therefore the height of the pallet above the soundboard might make the biggest difference.

In my (limited) experience reducing the pallet height has the greatest effect.    On the treble side, new felt and leather and checking the button travel with the strip of wood under the lever arms nearly eliminated the treble pallet noise on my Erica.  With the basses I could not find a good way to limit the button travel in a similar manner so I just increased the thickness of the felt to reduce the pallet height.  I also put two little strips of very thin self sticking felt in the bass button holes to quiet the button noise.  My Erica no longer makes any rattles or clacks.   It is remarkable how much difference these modifications made.

So it doesn't sound like a Hohner any more?  ;D  Personally I quite like the clatter of a mature Hohner.........
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Leather and felt for pallets
« Reply #10 on: September 02, 2011, 08:01:45 PM »

My Erica with the clatter is the perfect Morris box, LOUD. You can't hear the clatter over the noise of the bells and crowd when we dance outside. However, I'd like the Preciosa  to play with a bit more finesse - volume control and expression (not that I can play with finesse yet! :P). I'm hoping to learn and need a box capable of doing so.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Leather and felt for pallets
« Reply #11 on: September 02, 2011, 08:09:42 PM »

From what I've found is there is a point that more felt is not better.  Of course flattened felt is pretty clackity, but I've tried with new felt, 1/16", then 1/8", and couldn't tell any difference. At that point, the sound is coming from the slap of the leather and, like Theo said, is more affected by springs.  Also by playing style.  A snappy release will create more slap.

As an experiment on my last 3 accordions, and with the thought that just an outside seal on the pallet would be less noisy since there would be less surface area hitting, I went the opposite direction and cut channels that connect all the holes under each pallet ( 4 on mine).  In that way, the pallet is only touching around it's perimeter.  It did make it somewhat quieter, though not as much as hoped, but the biggest positive change was that it makes the pallets easier to get to seat well. I think that also allows the row closest to the player sound quicker, though that may be just in my mind.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Leather and felt for pallets
« Reply #12 on: September 06, 2011, 05:09:09 PM »

My Erica with the clatter is the perfect Morris box, LOUD. You can't hear the clatter over the noise of the bells and crowd when we dance outside. However, I'd like the Preciosa  to play with a bit more finesse - volume control and expression (not that I can play with finesse yet! :P). I'm hoping to learn and need a box capable of doing so.

I spent the past weekend re-tuning (light tremolo, dedic: what a difference!) then playing my Erica .  I've confirmed for myself that pallet noise comes more from my playing and the instrument setup. In addition, I discovered that some if not all of the finesse I want in the bass (volume control) comes from how far the pallet opens, something I hadn't figured out until just yesterday. Imagine my surprise when I start to hear a soft bass coming from the instrument to match the softness in the treble! I begin to see why the Erica has the bass keyboard set at an angle - it allows the player to dial in how far down the button travels. I need to make further modifications to the keyboard action, both treble and bass, and to my playing skills. Nothing like listening to Anahata and DTN and others and then trying to copy their playing style to make you appreciate what the instrument can do.

My apologies to those who love their Ericas and Pokerworks, are able to approach their playing with more skill than I, and have the finesse that I aspire to.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Leather and felt for pallets
« Reply #13 on: September 15, 2012, 02:33:35 AM »

I thought I had already asked this question, but didn't get an answer & now can't locate the question ... so I'll ask here not strictly related to the thread title):

I would like to add felt to the old-style MOP buttons - both the basses & treble - on my vintage Hohner. The idea is both to limit the noise & reduce the button travel. I'm not sure about the best way to go abut this - ideally, I would want to cut out the felt so that it sits around the bass rod & similarly on the treble buttons, although there it's further complicated by the presence of the wooden arm. Are there any special tricks for doing this?
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Leather and felt for pallets
« Reply #14 on: September 15, 2012, 07:36:09 AM »

I thought I had already asked this question, but didn't get an answer & now can't locate the question ... so I'll ask here not strictly related to the thread title):

I would like to add felt to the old-style MOP buttons - both the basses & treble - on my vintage Hohner. The idea is both to limit the noise & reduce the button travel. I'm not sure about the best way to go abut this - ideally, I would want to cut out the felt so that it sits around the bass rod & similarly on the treble buttons, although there it's further complicated by the presence of the wooden arm. Are there any special tricks for doing this?

If I read the question correctly, then I think what you'd like to do is pad the undersides of the pearl tops of the buttons? If that's the case, then I'm fairly certain I've seen for sale, on either the CGM page or elsewhere on the net, felt collars for just this type of button. You might try sending an email to Mr. Marshall before making your own because his inventory changes. If that fails, I'd think experimenting with different punches should make an easy enough job of it. I've never attempted it, though. Could be a nightmare! :|glug

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Leather and felt for pallets
« Reply #15 on: September 15, 2012, 07:45:49 AM »

I thought I had already asked this question, but didn't get an answer & now can't locate the question ... so I'll ask here not strictly related to the thread title):

I would like to add felt to the old-style MOP buttons - both the basses & treble - on my vintage Hohner. The idea is both to limit the noise & reduce the button travel. I'm not sure about the best way to go abut this - ideally, I would want to cut out the felt so that it sits around the bass rod & similarly on the treble buttons, although there it's further complicated by the presence of the wooden arm. Are there any special tricks for doing this?

If I read the question correctly, then I think what you'd like to do is pad the undersides of the pearl tops of the buttons? If that's the case, then I'm fairly certain I've seen for sale, on either the CGM page or elsewhere on the net, felt collars for just this type of button. You might try sending an email to Mr. Marshall before making your own because his inventory changes. If that fails, I'd think experimenting with different punches should make an easy enough job of it. I've never attempted it, though. Could be a nightmare! :|glug

From Charlies' website

http://www.cgmmusical.co.uk/CGM_Musical_Services/Treble_Bass_Buttons.html#45

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Leather and felt for pallets
« Reply #16 on: September 15, 2012, 09:19:23 AM »

Has anyone tried Neoprene foam for pallets? Place I used to work had loads of it, seemed like a possible material.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Leather and felt for pallets
« Reply #17 on: September 15, 2012, 04:53:19 PM »

Ah ... yes, of course! Charlie Marshall!

The treble buttons will still be fiddly, but perhaps a couple of snips with a sharp pair of scissors or a sharp blade, leaving a piece of felt at the one end of the button, will do the trick.

Thank you Lester & Christopher!
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Leather and felt for pallets
« Reply #18 on: September 15, 2012, 08:22:52 PM »

I have just done both treble & bass pallets with the appropriate stuff from CGM'S. I followed all the advice & tips on here, and all seems to be well. The treble pallets however, are letting a bit of air past at the high end. I think it might need a little tweek here and there, but I think it will settle down with use, because the felt will compress a little and the leather will become less rough. It's definitely better than it was, clack-wise.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Sebastian Trudgian

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 124
  • DG Pokerworks and also play Irish Whistle/Flute
Re: Leather and felt for pallets
« Reply #19 on: September 10, 2024, 10:21:00 AM »

Apologies for resurrecting this thread.

I want to do this with a Hohner "Student" (a piano accordian that's essentially a hohner pokerwork style melodeon with piano keys) for my partner.

I'm not worried about "clacking" just that it holds as much air as possible (and is relatively responsive)

In that case, do you think laminating the felt with leather (as detailed above) is neccesary, or do you think I could just use a felt on the surface of the pallets (and if so, could someone kindly recommend a good type/specification of felt/where to get it (uk)?)

(Also bonus question if possible...
- It's missing the two pokerworks style "eyelets" that hold on the metal grill. If anyone knows what size these are so I can order from a diy shop somewhere now CGM isn't around, that would be very helpful)
« Last Edit: September 10, 2024, 10:35:53 AM by Sebastian Trudgian »
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal