Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Ha-114  (Read 6257 times)

0 Members and 1 Guest are viewing this topic.

bonenfant

  • Good talker
  • **
  • Offline Offline
  • Posts: 71
Hohner Ha-114
« on: September 05, 2011, 11:55:50 PM »

Hi fellows
I have a small Hohner Ha-114 with a problem. I don't know if it's because I'm a beginner or what, but I break a lot of spoon springs. To a point that I'm thinking of rigging it with buttons instead of spoons. Does anyone know if it's a big job (ajustment of the rods etc...)? Also where could I buy a bass block with buttons?
Thanks!
Robert
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner Ha-114
« Reply #1 on: September 06, 2011, 12:53:29 AM »

Hi fellows
I have a small Hohner Ha-114 with a problem. I don't know if it's because I'm a beginner or what, but I break a lot of spoon springs. To a point that I'm thinking of rigging it with buttons instead of spoons.
The odd spoon spring breakage does happen occasionally (although in nearly 30 years of playing I've never had it happen to me - yet!) but it shouldn't be happening on a regular basis. One mistake that beginners tend to make is striking the spoon keys with their fingers from a distance. Instead, try to keep your fingers very close to the keys, almost touching them, so that your fingers act as if they are part of the key mechanism rather than hammers hitting the mechanism. This way, there is far less stress on the spoon key and spring.

Quote
Does anyone know if it's a big job (adjustment of the rods etc...)?
Yes, a big job. It would necessitate a complete rebuild of the bass-end block, as the buttons would need to operate internal pallets.

Quote
Also where could I buy a bass block with buttons?
I would say next to impossible, unless you had one specially made for you (expensive!) or else you salvaged one from a scrap instrument. You would still have a signifcant refit to do, and you would need to ensure that the new bass-end block aligned with the internal ports to the existing reed chambers. More trouble than it's worth, I think. Far better to obtain some genuine Hohner replacement spoon springs and then go easy with your fingers, as mentioned above.
« Last Edit: September 06, 2011, 01:01:23 AM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

c2aminor

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Ha-114
« Reply #2 on: September 06, 2011, 01:07:28 AM »

I've replaced the broken spoon springs with a safety pin. Open the pin, put the half with the sharp tip under the spoon, put the other half on the wood under the spoon, twist that latch part 90 degrees, then put a small screw through the hole in the latch part and into the wood. You'll have to find the right size safety pin to give the proper spring tension. ---- Rich
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Hohner Ha-114
« Reply #3 on: September 06, 2011, 01:53:09 AM »

Yes, a big job. It would necessitate a complete rebuild of the bass-end block, as the buttons would need to operate internal pallets.

To be more specific, you would need to make internal pallets and then remove the bass grip/box to fit those pallets (and new springs) inside the grip/box.  On a typical Cajun accordion, those pallets are made with two pieces of wood connected with felt or felt/suede combo, which also serves to seal the pallet against the hole (from the inside) and to dampen the noise.  The pallet then gets pushed down from the outside by a rod (with "button" on the end).
It sounds more complicated than it is, and among the things that you need to be aware of, if you don't manage to get the new pallets to seal against the inside on the bass grip/box, then you will end up with unintentional drones or constant chords.  It's certainly more work than some minor fixes (more work than simply replacing the springs on your existing bass spoon) but less work than, say re-reeding your accordion.

Another option would be to have a Cajun builder make a new bass box/grip for you.  Elton Doucet does/did this kind of work.

Doug Barr

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Hohner Ha-114
« Reply #4 on: September 06, 2011, 02:06:23 AM »

I have a HA 114, but have not broken any springs.  What I did do  is cut a cork from a wine bottle length wise and used one half to of it.  I used double stick tape to install it on the body in the middle under both spoon handles.  This does two things, it limits the throw on each spoon but not enough to effect the sound, and also stops the clacking noise of the spoon handle hitting the body of the instrument.  Try it, I think you will like the way it feels and sounds,  and break less springs in the meantime.   Doug
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Ha-114
« Reply #5 on: September 06, 2011, 06:51:01 AM »

Constantly breaking springs?  So your replacemets are breaking?  How/what are you replacing the springs with?  How many have you broken?

To replace the spoons with buttons you have to replace the box that the spoons are mounted on, it's not big enough to hold the pallets and springs required.  I have made replacement box with buttons,  so it is possible.  The bigger box also feels much different while playing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rosenun

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Hohner Ha-114
« Reply #6 on: September 06, 2011, 08:04:22 AM »

I have recently broken my first spoon spring on my Ha-114 quickly replaced by taking one from my 2 stop (Ha-112 ?). They do seem to have some reputation for breaking springs. In Tufty Swift's little book on one row playing he suggests fixing folded card under the operating end of the spoon to limit the travel. I very much like the idea of using the cork in a similar way and one can buy self adhesive cork pads which might be better and easier.

I don't yet know if the breaking of springs is going to be a continual problem for me as a beginner but I am on the lookout for some suitable piano wire to make replacement springs (about 0.028" any suggestions ?), not difficult to make I believe. The hinge pins will have to be removed and then replaced with new springs using small split pins perhaps.

John.
« Last Edit: September 06, 2011, 08:18:46 AM by rosenun »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner Ha-114
« Reply #7 on: September 06, 2011, 10:59:42 AM »

The hinge pins will have to be removed and then replaced with new springs using small split pins perhaps.

John.

Yes, I always replace the hinge pin with split pins - it makes the job much easier the next time it happens.

I have also built button type bass boxes for the HA114. Expensive and bulky as has been pointed out by Theo and Steve.

The main reason for not fitting a button type box is that it radically changes the sound of the left hand.
Spoon basses open outwards giving a wah effect to the sound thus creating the famous Hohner bass grunt.
Button basses open inwards, therefore no wah and no grunt.  :(
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner Ha-114
« Reply #8 on: September 06, 2011, 11:52:30 AM »

The main reason for not fitting a button type box is that it radically changes the sound of the left hand.
Spoon basses open outwards giving a wah effect to the sound thus creating the famous Hohner bass grunt.
Button basses open inwards, therefore no wah and no grunt.  :(
Good point, Rees. I hadn't thought of that before.  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner Ha-114
« Reply #9 on: September 06, 2011, 01:14:13 PM »

I have 2 HA-114s, one of which I have owned for about 27 years and the other about 25; in that time I have never had to replace a spring, so I guess it's either a very unfortunate inconsistency in quality of spring manufacture, some kind of set-up fault, or a left-hand technique problem. Or else I have been very lucky. I haven't modified the spoons in any way; I play with my fingertips & thumb permanently resting on the spoons and use a squeezing action rather than a hard push down (I've never fired a gun, but presumably this is the kind of thing people mean when they say "squeeze" the trigger, don't "pull" it).  Having said that, I now fully expect a spring to go next time I play one of the boxes  ;)

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Hohner Ha-114
« Reply #10 on: September 06, 2011, 01:36:27 PM »

In Tufty Swift's little book on one row playing he suggests fixing folded card under the operating end of the spoon to limit the travel.

Of course, should you wish to play like that master of the one row Oscar Woods, your folded card will only be provided once you've smoked the 20 Park Drive....

And thank you Rees, for explaining the Hohner grunt in terms I understand.... (:)
Logged
On the edge of Cheshire's Golden Triangle, apparently...

bonenfant

  • Good talker
  • **
  • Offline Offline
  • Posts: 71
Re: Hohner Ha-114
« Reply #11 on: September 06, 2011, 10:30:53 PM »

Thanks to all of you for the excellent advises. I will try again not to raise my left fonger too high. I will also use some cork (this was good).
Cheers.
Robert
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Hohner Ha-114
« Reply #12 on: September 06, 2011, 11:22:29 PM »

To replace the spoons with buttons you have to replace the box that the spoons are mounted on, it's not big enough to hold the pallets and springs required. 

Really, Theo? I've seen dozens of retrofitted HA-114s in Quebec, and all appeared to have the original Hohner "box"(grip).

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner Ha-114
« Reply #13 on: September 06, 2011, 11:53:05 PM »

Andy beat me to it.  I'm also puzzled by the mention of button bass boxes having to be larger than the spoon type.  I have a couple 1-rows of each type (including an HA-112), and they're all more or less the same size.  I thought the main difference was the angle of the diagonal partitions between the chord, air and bass chambers ??

Martin
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Ha-114
« Reply #14 on: September 06, 2011, 11:58:19 PM »

Oh well I'm not an expert on one row basses,  but there is not a lot of room inside the Hohner ones.  It seemed easier when I had to fit buttons, to make a new box that was a bit more roomy.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner Ha-114
« Reply #15 on: September 07, 2011, 12:22:30 AM »

See what I mean:

Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner Ha-114
« Reply #16 on: September 07, 2011, 12:31:36 AM »

... and this site has a picture showing the inside of a button-type bass box ...

http://fiddleboy.net/box.html
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Hohner Ha-114
« Reply #17 on: September 07, 2011, 12:54:51 AM »

See what I mean:


Ah yes, the characteristic art nouveau "naked ladies" of a Messervier, on the right.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Hohner Ha-114
« Reply #18 on: September 07, 2011, 03:00:51 AM »

The base box doesn't need to be bigger, the ones I've made have been exactly the same size as the Hohner box, but I sure don't see why anyone would want to keep the Hohner style.  It's pretty easy to make a base box, and even a crude one would be more comfortable (at least for me).  I've never tried to put buttons on a Hohner box, but I would have thought the existing hole locations wouldn't have been ideal for making the internal valves fit.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal