Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 4 5 6 7 8 [9] 10 11 12 13 14   Go Down

Author Topic: The 21st Century Box  (Read 108163 times)

0 Members and 1 Guest are viewing this topic.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The 21st Century Box
« Reply #160 on: June 19, 2014, 07:31:01 PM »

The millled Al reed block/pallet board idea hasn't died, it's just been resting... ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: The 21st Century Box
« Reply #161 on: June 20, 2014, 10:27:21 AM »

I am milling reedblocks out of Lime and laser cutting palletboards. Similar principle to what Ian has proposed. I have to admit that I am somewhat cautious about milling in Al, there is a risk that it will be very bright and brash (although it would be probably the most responsive box in existence). The absorption by the blocks isn't always a bad thing - although it can be responsible for sluggish and syrupy boxes.

EDIT: Having said that, if I had a cnc mill which could mill in Al I would certainly give it a go!
« Last Edit: June 20, 2014, 10:30:14 AM by ukebert »
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: The 21st Century Box
« Reply #162 on: June 20, 2014, 12:08:45 PM »

Clém Guais uses aluminium pallet boards and they looked as though they were milled, although I forgot to ask him. His reed blocks, however, are wooden.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: The 21st Century Box
« Reply #163 on: June 20, 2014, 12:19:07 PM »

Clém Guais uses aluminium pallet boards and they looked as though they were milled, although I forgot to ask him. His reed blocks, however, are wooden.

My Tommy, so probably all the others as well, had an aluminum fondo (other names are available)

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: The 21st Century Box
« Reply #164 on: June 20, 2014, 12:32:00 PM »

What I meant by my statement was reedblocks and palletboard milled out of one piece of alumnium, not aluminium palletboards in general, which have certain advantages over wooden ones.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The 21st Century Box
« Reply #165 on: June 20, 2014, 08:46:19 PM »

What I meant by my statement was reedblocks and palletboard milled out of one piece of alumnium, not aluminium palletboards in general, which have certain advantages over wooden ones.
Watch this space...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: The 21st Century Box
« Reply #166 on: June 20, 2014, 08:53:33 PM »

What I meant by my statement was reedblocks and palletboard milled out of one piece of alumnium, not aluminium palletboards in general, which have certain advantages over wooden ones.
Watch this space...

Unless you have access to some fancy extrusions, and maybe even then, that's a lot of aluminium getting wasted.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The 21st Century Box
« Reply #167 on: June 20, 2014, 09:05:48 PM »

What I meant by my statement was reedblocks and palletboard milled out of one piece of alumnium, not aluminium palletboards in general, which have certain advantages over wooden ones.
Watch this space...

Unless you have access to some fancy extrusions, and maybe even then, that's a lot of aluminium getting wasted.
Not really, a suitable slab of 10mm alloy isn't that expensive, and CNC milling from solid is perfectly normal for forming complex shapes -- in fact if you cost your time at a reasonable rate it might even work out cheaper than building it all out of wood, after it's set up you can just walk away and let it get on with it while you do something else.

People often forget that by far the biggest cost in building a box (and what stops you building more) is labour, not materials -- if you can do something that costs rather more in materials but saves a lot of time it ends up cheaper overall.

Of course you need to add in the time to set up (program) the machine and rent/buy it, unless you just deliver the CNC file to an engineering firm and get the finished product back -- for which they'll charge you, but maybe less than you'd think, and probably less than buying a CNC miller unless you're going to make a lot of things with it...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: The 21st Century Box
« Reply #168 on: June 21, 2014, 12:45:07 AM »

What I meant by my statement was reedblocks and palletboard milled out of one piece of alumnium, not aluminium palletboards in general, which have certain advantages over wooden ones.
Watch this space...

Unless you have access to some fancy extrusions, and maybe even then, that's a lot of aluminium getting wasted.
Not really, a suitable slab of 10mm alloy isn't that expensive, and CNC milling from solid is perfectly normal for forming complex shapes -- in fact if you cost your time at a reasonable rate it might even work out cheaper than building it all out of wood, after it's set up you can just walk away and let it get on with it while you do something else.
Also, aluminium kerf can be collected and recycled, so it's not really wasted. However, wood waste/kerf is much less practicable to re-use.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The 21st Century Box
« Reply #169 on: June 21, 2014, 08:35:55 AM »

 ;D delighted to see a renaissance here. I've tried to copy in good ideas from other threads as they came up. Feel free to scan back through recent 21CB pages, move on anything that takes your fancy.  :|glug
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The 21st Century Box
« Reply #170 on: June 22, 2014, 08:54:40 AM »

From another thread

It would be nice to have a box with easily exchangable reed blocks. The read blocks are enclosed in their own housing and can be exchanged quickly, for example to switching from D/G to Eb/Bb. Maybe the reed block's housing could be designd is like drawer of a cupboard.

I've personally gone the path of a third row, and extended bass. This idea is arguably cheaper, but could you change keys within a session? My concern would be that anything that was quick to change might eventually lose air-tightness? But all things are solvable.
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The 21st Century Box
« Reply #171 on: October 24, 2014, 09:38:01 AM »

This has appeared elsewhere

Watching this video of Peter Browne and Tim Edey it struck me that Peter's left hand is way up at the top of the case, far away from the buttons, which he doesn't use at all, as Tim is handling the melody chores here, and presumably to have that much great control over the bellows.  This got me to thinking, why have the buttons in the middle?  Why not up at the top?  It's certainly not going to happen with a PA and 48+ buttons but with these little 8 - 18 button jobs we play why not?

Am curious too if any put their left hand up top like Peter.  I find it does help a bit. So many other things hinder my playing though... ;D

I always find it fascinating to listen to design discussions between my son, who is a furniture designer/maker, and his fiancee who is a designer.  She tends to go for looks over functionality whilst my son tends to go for functionality combined with eye appeal and ease of manufacture.  Things which are needlessly complicated simply to achieve a different look don't get made because they are wasteful of materials, the design "twist" often affects functionality adversely and often reduces the potential sales market. The classic from his days at university were some of the table designs emanating from the design students.  A few had a hole in the centre of the table-top through which a pyramid of table-legs would poke through.  Hard to make, tricky to fix the table-top to the legs and the hole hugely reduces the available surface on which to put things.  There are good reasons why tables have simple flat tops!

So maybe the question in relation to boxes should be: "Why would you not place the buttons in the centre?".   In designing and manufacturing something mechanical I think there is a natural tendency to go for symmetry since it usually looks better and, curiously, often seems to work better too. It avoids having to design awkward/needless mechanisms to accommodate an offset arrangement. Having a button or lever close to the thing it is operating makes good mechanical sense. 

And as soon as you shift the bass/chord buttons you run into other problems - where do you place the air button and how do you attach the strap to comfortably accommodate a different hand position?  These aren't insurmountable problems but in solving them you might end up with an instrument with the same aesthetic qualities as a pig's bottom.  Mind you...a pig's rear is at least symmetrical and very functional!  :D
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The 21st Century Box
« Reply #172 on: November 27, 2014, 08:58:38 AM »

Meanwhile, somewhere in Patagonia …

    https://www.youtube.com/watch?v=Ckur8W4RoJc]

Superb 2009 documentary on a project keep the Bandonèon alive, as the iconic instument of Angenina. Listen for "21st Century Bandonèon" about 21 (what else) minutes in.

Nice exploration of the challenges involved in box design and construction :|glug
Logged
  _       _    _      _ 

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: The 21st Century Box
« Reply #173 on: November 27, 2014, 09:11:54 AM »

Re: position of bass buttons, I have a thing with my Lucia, stradella bass - the chords you want to play most, G/D/A/Em/Bm/etc are at the top end of the case, close to where the bass strap joins with the box, so this is where the hand spends most of it's time - in the top half of the box. In practice, this is a pain because the strap is much closer to the box at the top and bottom of the bass end, hence less flexible and harder to move the hand about. Not undoable, and with time the strap has eased, but certainly not an advertisement for moving standard bass buttons away from the centre...

Cheers,

Clive

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The 21st Century Box - kniri system for blues?
« Reply #174 on: March 24, 2015, 10:59:03 AM »

Opinion? Well, quick look, it looks very interesting blues-wise. 

   http://www.kniri.ch/de/bluesaccordion.aspx

For a start you get the standard major blues G7 D7 and C7 chords, the latter on draw, and mixolydian scales on G,C. Both standard blues technique. On D they tend to play more far out things. 'altered' isn't there. It's same notes/mode of C# melodic and the notes don't do that far. (would be squeaky anyway) but plenty to go for.

The flattened notes seem to be in upper octaves. That might work too - "out" notes are often played there, essentially as extensions to the base chord. it might not be quite blues as we know it, but "there ain't not rules 'xcept don't play a major 3 on a minor chord"

Minor blues are catered for on the pull. It'd be a challenge to sort a bass end for it (unisonorics?) but I like the way you can play in C, F or Bb in the higher octaves.  Very clever.

OK.   I've been doing some simulations of a 2 row kniri ('knirink' ?) looking for

  1. Scale over 2+ octaves
  2. Easy access to the 'blue' - b7 is built in to kniri, and there are  b9's
      in there but the tense #4=b5, really characteristic of 'blues' scale isn't :-\

As ever with melodeons - compromise required, but a 2 row with kniri scales #4 (three tones) apart seems to have most potential. Yes, a normal 2 row is 4th apart, 5th looked at from the inside, and this is half way between the two >:E  Essentially it is two one rows,  kniri/122 tuned. With each row acting as a souce of accidentals for the other, symetrically :P I cannot see anything except unisonorics working on left end, and will look to some of Ukebert's experiments. 

Now what I need is a carcass … [ed] whoops, forgot the layout!!

Code: [Select]
  ºG/ºAâ™­  ¹Bâ™­/¹C  ¹C♯/¹Eâ™­ ¹F/¹F♯   Â¹Aâ™­/²Bâ™­  ²B/²C♯  ²Eâ™­/E  ²F♯/²Aâ™­  ³A/³B  ³C♯/³D
Eâ™­/F♯  ºG/¹A   Â¹B/¹C    ¹D/¹E    ¹F/¹G   Â²A/²Bâ™­  ²C/²D  ²Eâ™­/²F  ²G/²Aâ™­  ³Bâ™­/³C  ³Dâ™­/³Eâ™­

On each row intervals run tone/tone/semitone…repeat. Hence b7th, and the octave eg G ends up as pull

edit Turns out there are 2 kniri pattens, repeating differently along the row and otherwise an odd number of semitones apart. As such tritone (6 semitone) row spacing would only access half the "kniri pattern space". Quart or quint spacing gives access to both patterns. So there's a choice, depending on what you play.
« Last Edit: September 10, 2015, 08:58:56 AM by Chris Ryall »
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The 21st Century Box
« Reply #175 on: April 24, 2015, 09:03:58 AM »

Progress report: a suitable carcass has been rescued from the Place Where Melodeons Go To Die, and I hope it'll be reeded up as per above by the summer. Right end only to start with, left still needs "a bit of thought"  :|glug
Logged
  _       _    _      _ 

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: The 21st Century Box
« Reply #176 on: April 25, 2015, 12:10:53 AM »

For those interested, here is a pic of some bass reed-block test pieces that I've milled in aluminium for my 'dream melodeon.'
Two cavities, just to evaluate the milling of required features.

Currently:
Base thickness = 4mm (to accommodate m2 fixing screws.)
Side wall thickness = 1.5mm.
Internal wall thickness= 1mm.
Logged
Trying to learn enough magic to make my own melodeon.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The 21st Century Box
« Reply #177 on: April 25, 2015, 08:28:10 AM »

Deeply interested. Alu blocks was an early idea in this "nothing barred" thread, though it didn't seem to come together until Ian's post last june. Great to see a practical manifestation! Were they computer control milled?

But these are - sort of modular sub-blocks? How do you fix them in without vibration and those "wolf" notes referred to earlier?  Otherwise you are perhaps just moving the "fix" issue along a bit to a different component.

This looks really interesting …
Logged
  _       _    _      _ 

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: The 21st Century Box
« Reply #178 on: April 25, 2015, 08:33:55 AM »

Re: position of bass buttons, I have a thing with my Lucia, stradella bass - the chords you want to play most, G/D/A/Em/Bm/etc are at the top end of the case, close to where the bass strap joins with the box, so this is where the hand spends most of it's time - in the top half of the box. In practice, this is a pain because the strap is much closer to the box at the top and bottom of the bass end, hence less flexible and harder to move the hand about. Not undoable, and with time the strap has eased, but certainly not an advertisement for moving standard bass buttons away from the centre...

Cheers,

Clive

Why not get a fettler to move the position of the basses/chords. It is not a difficult job.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The 21st Century Box
« Reply #179 on: April 25, 2015, 11:06:58 AM »

Deeply interested. Alu blocks was an early idea in this "nothing barred" thread, though it didn't seem to come together until Ian's post last june. Great to see a practical manifestation! Were they computer control milled?

But these are - sort of modular sub-blocks? How do you fix them in without vibration and those "wolf" notes referred to earlier?  Otherwise you are perhaps just moving the "fix" issue along a bit to a different component.

This looks really interesting …
Unfortunately it all seems to have gone quiet as far as progress on the milled-ali-reed-pan box I was discussing is concerned... :-(
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: 1 ... 4 5 6 7 8 [9] 10 11 12 13 14   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal