Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Soundboards again  (Read 9043 times)

0 Members and 1 Guest are viewing this topic.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Soundboards again
« on: September 29, 2011, 03:16:01 PM »

The prevailing opinion seems to be that "that board" is not involved in and has no effect on sound production. 

Has this idea ever been properly tested?

It reminds me of the argument of certain physicists that the material a flute is made of has no bearing on the tone of the instrument, this being purely a product of the dimensions of the bore and other factors unconnected with the material.

I am no expert as a flute player but I don't buy this argument and I'm sure that many expert flute players don't buy it either. I have played barrowloads of whistles though and I think that plastic, aluminium, and wooden varieties each tend to have a characteristic timbre. 

This makes me view the prevailing opinion with a small degree of scepticism. Has anybody fitted the same instrument with soundboards of different materials and tested the effect of aluminium, plywood, solid wood, etc.?

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Soundboards again
« Reply #1 on: September 29, 2011, 06:08:14 PM »

Is it a prevailing opinion or just the one being voiced?
Wood and alloy sound boards seem to have such powerfully different characteristics I personally feel that the material is involved, if there is no vibration of the sound board presumably this can be measured, if there is vibration I think it would be hard to deny an involvement in sound production, secondary resonance or otherwise. My small experiments for my own interest have at one time or another involved replacing a couple of sound boards with ones other than the original material and found them to have completely different characteristics, Some one also gave me a poker work made of 8mm perspex apart from the reed blocks bellows and mech, it was a less than satisfying result, I felt, as it's sound was nothing like the rich full sound of the original and seemed very harsh and lacking in body/depth or any real melodeon/button accordion warmth and character, so much so that apart from robbing the reeds n mech etc, it went into the trash. I'm sure I will be informed otherwise soon enough, but that's my experience. Isn't it wonderful to have so many experts in one place  ;D mory
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Soundboards again
« Reply #2 on: October 02, 2011, 12:17:38 AM »

I'd believe in a theory involving sound reflection to do with the surface density of the materials involved. A 'soundboard' as such doesn't make much sense to me at all because it is small, bound on all sides and has massive, rigid reed blocks mounted at right angles to the smallest dimension. The solid body of an electric guitar has an impact on it's sustain but not on the acoustic properties. I'm not saying that the use of alloys or varnished/dense woods inside accordions will have no effect on the overall sound but it will be more about bouncing it around efficiently and getting it out quickly than some mystical vibration of one material versus another.

Coat!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Soundboards again
« Reply #3 on: October 02, 2011, 12:32:49 AM »

On 2 accordions I just finished and had put 2 layers of felt on the valves (pallets) with the leather (as opposed to my usual one layer felt), hoping to make it seal better and be quieter.  Both lacked the usual punch compared to those I've finished before, and after seeing a comment by Peter Hyde, I removed one layer, and now much better sound.  So if one little layer of felt, outside of but against the soundboardfaceplatefondo can make that much difference, it sure stands to reason that the make up of the soundboardfaceplatefondo would make a sound difference also.  I am building one now that will have solid spruce core with very thin layer of veneer on both sides, as opposed to my usual aircraft plywood, anxious to see if there is a tonal difference, and will report on it.

But, just more slightly tested opinions........

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Soundboards again
« Reply #4 on: October 02, 2011, 12:38:33 AM »

On a violin there is a mechanical link between the string and the soundboard. Take away the mechanical link and the note from the string does not get amplified through the resonances built up in the instrument.

Play an electric violin unplugged and see how much sound you get wthout a soundboard.

In an accordion the mechanical link between the reed and the rest of the instrument plays no part in the creation of the note. If it did than you'd still hear it playing after you lifted your finger off the button and closed the pallet. The reed is still vibrating, but there is no note being produced, not even a vestige of one.

The vibrations in the body of an accordion are being created by air waves. This is the transmission of sound (and it's reflection etc), not it's creation.

To call part of a melodeon a "sound board" would be like calling the lid of a cardboard box (and no other part of it) a soundboard because you had a radio playing inside it.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Soundboards again
« Reply #5 on: October 02, 2011, 01:10:11 AM »

All true. But I can't believe that the soundfacefondoplateboard doesn't vibrate at all. I think it reasonable to assume that it does vibrate, which will change the sound generated by the instrument, due to the loss of energy. So different materials, with different flexibility will give different sounds. We can see this from anecdotal evidence.

Another question, arguably more important, is whether this is a good thing. I know that many are of the opinion that the more rigid it is the better, and that the ideal box would be totally rigid and reflecting. As I've said before, I'm not sure that this would be the case, as the sound of a pure free reed siren sound is not very pleasant, rather harsh and piercing. It may well be that absorption by the components of the box and sympathetic vibration actually improve the sound. However, I don't have any evidence for this and I don't think anyone has done a proper study of it. I will have access to equipment that could tell me this year... but I'm supposed to be using it for other things :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Soundboards again
« Reply #6 on: October 02, 2011, 04:11:22 AM »



In an accordion the mechanical link between the reed and the rest of the instrument plays no part in the creation of the note. 


I don't think I can agree that it plays no part, it may not play a big part, but it has to play a small part in the quality of the sound, however small.  Even if minute, it's worth exploring because you put a few minute differences together and it add up to a noticeable difference.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Soundboards again
« Reply #7 on: October 03, 2011, 04:06:25 PM »



In an accordion the mechanical link between the reed and the rest of the instrument plays no part in the creation of the note. 


I don't think I can agree that it plays no part, it may not play a big part, but it has to play a small part in the quality of the sound, however small.  Even if minute, it's worth exploring because you put a few minute differences together and it add up to a noticeable difference.

If you go down this route -- everything however small can make a difference -- you'd better have a very large development budget because you're sure going to have to try out a lot of different combinations.

The correct engineering approach is to start with the things that we know make a big difference and can explain why this is so and how they might be improved (reeds, reed tuning/setting reed block volume/shape/bracing, pallet hole size/thickness, grille...) and get those right first. Then if you want you can look at the things which engineering says almost certainly don't make a difference but might conceivably make a small one like pallet board material.

Sorry to keep using the word "engineering" but it's the science of solving real-world problems using analytical method rather than mumbo-jumbo, it's what brings you things that work instead of homeopathy and crystals ;-)

Ian

P.S. Yes I know Stradivarius knew nothing about engineering, but we can still use it to explain why his instruments sound so good. Except that in a double-blind trial with discriminating listeners against a modern violin developed scientifially the Strad came second...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Soundboards again
« Reply #8 on: October 03, 2011, 04:25:17 PM »

The debate illustrates why I asked the question in my OP - has the effect of soundboard material ever been properly tested?

I don't think you would need a very large development budget to do this.

In fact there was an answer to the question in another thread (in the 21st century box thread I think it was) from someone who had tried both wooden and metal soundboards in the same model of box and found there was a distinct difference.



blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Soundboards again
« Reply #9 on: October 03, 2011, 05:55:32 PM »

"properly"?  That doesn't sound as much fun as tripping and stumbling around and groping for opinionated guesses. ;D

Problem with doing much scientifically is a lot of what we'er looking for amounts to personal preference.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Soundboards again
« Reply #10 on: October 03, 2011, 06:18:35 PM »

The debate illustrates why I asked the question in my OP - has the effect of soundboard material ever been properly tested?

I don't think you would need a very large development budget to do this.

In fact there was an answer to the question in another thread (in the 21st century box thread I think it was) from someone who had tried both wooden and metal soundboards in the same model of box and found there was a distinct difference.


You'd need a large budget because if you start looking at the unlikely things (of which there are many) as opposed to the likely ones (of which there are few) you have an awful lot to try out. How about the pallet material (wood? plastic? metal?). How about the exact shape of the pallets? How about round vs. square pallet holes (with the same area)? How about [insert unlikely factor here]?

Was the pallet board trial done with materials of the same thickness, was it repeated with the reed blocks swapped between the two instruments, and did the player or the listener know which one was being played?

If not you haven't shown there's a difference due to the pallet board material, not the reeds (even if nominally identical) and observer bias -- either by the player or the listener.

Sorry to go on about this, but just the observer bias caused by knowing which one is which has been the downfall of many claimed differences which have been shown to be untrue under properly controlled conditions (double blind or ABX testing).

For example, proponents of sound differences between exotic (and expensive) audio cables have been consistently unable under these conditions -- actually, every single time -- to show they can hear any difference that isn't simply due to basic electrical properties (LRC) -- they can only tell which is which ("this sounds so smooth") if they already know the answer. This doesn't stop them continuing to insist to all and sundry that a $1000 cable will make their hi-fi sound better.

(and of course if the listener believes it does, then it does to them -- the placebo effect again)

The simple fact is that free reed instruments are completely different to stringed or beating reed/pipe instruments because the tone generation is almost entirely determined by the free reed and the acoustic path to the outside air, and the acoustic impedance seen by the reed. Little energy is coupled into the structure or radiates from or through it, unlike the other instruments (though resonances causing reed coupling can still affect the sound in specific circumstances, hence the strap between reed blocks). Any similarities drawn between free reed and other instruments regarding materials or structure are very likely to be invalid, they're a very different beast.

Those who disagree with this view, feel free to go and read the various books, papers and theses on the acoustics of musical instruments before drawing any conclusions -- also texts about experimentation, observer bias and how to remove it.

If (or when) somebody does the comparison properly and can demonstrate there's still a statistically significant difference, then I'll quite happily believe them. Until then I'll invoke Occam's Razor...

Cheers

Ian

P.S. Sorry if this comes over aggressively, but I see too many snake oil salesman to have any sympathy unless they can prove what they claim -- and music and musical instruments are more guilty of this than many other fields ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Soundboards again
« Reply #11 on: October 03, 2011, 06:23:49 PM »

"properly"?  That doesn't sound as much fun as tripping and stumbling around and groping for opinionated guesses. ;D

Problem with doing much scientifically is a lot of what we'er looking for amounts to personal preference.



The problem is not personal preference (liking one sound more than another, perfectly valid), it's claiming there's a difference (based on opinion) when none has been shown to exist :-)

This has been shown to be very common in the audio world even if the observers don't realise they're doing it, musical instrument are exactly the same.

Science is largely about showing that a claimed result is not due to the prejudices -- unconscious or not -- of the experimenter or observer :-)

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Soundboards again
« Reply #12 on: October 03, 2011, 08:00:34 PM »

As I see it the basic requirements for a fair experiment would be ...

  • a melodeon, probably single voice because that reduces the variables and is probably easier to measure (beats per second etc would mess up the analysis)

    a set of "soundboards" milled with openings of the same dimensions (a CNC job)

    a mechanical squeezing and button pushing device,  can't be a human as all pressures etc have to be identical

    measuring device to ensure same pressure across the reeds

    recording and analysing equipment.

Not ruinously expensive but you'd certainly be able to buy at least one Briggs (or similar) for the cost  (:)

Steve
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Soundboards again
« Reply #13 on: October 03, 2011, 09:44:29 PM »

As I see it the basic requirements for a fair experiment would be ...

  • a melodeon, probably single voice because that reduces the variables and is probably easier to measure (beats per second etc would mess up the analysis)

    a set of "soundboards" milled with openings of the same dimensions (a CNC job)

    a mechanical squeezing and button pushing device,  can't be a human as all pressures etc have to be identical

    measuring device to ensure same pressure across the reeds

    recording and analysing equipment.

Not ruinously expensive but you'd certainly be able to buy at least one Briggs (or similar) for the cost  (:)

Steve

Excellent idea. But maybe a 2 reed would be better, because one of the ways that any stiffness difference due to material might show up would be the "reed locking" that the strap between the blocks tries to prevent.

To put some numbers in, I reckon the reed blocks are at least 10x as stiff as a thin pallet board (wood or aluminium) because they're so much deeper (stiffness = thickness^2), which means ~90% of the stiffness comes from the reed blocks and ~10% from the pallet board. And thinking of the possibility of sound passing through the exposed pallet board from inside the box, a quick comparison to loudspeaker diaphragms of the same thickness and area with no suspension also suggests that this will be negligible too.

I await the results with interest... :-)

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Soundboards again
« Reply #14 on: October 03, 2011, 11:42:56 PM »

We're getting down to the nitty-gritty of the subject here. Many of the theories expounded in this thread are based on hearsay and subliminal suggestion. I wouldn't know how to go about carrying out the kind of survey IanD is talking about but I do know that the method suggested sounds logical and would appear to remove any element of preconceived bias.

I'd happily undertake a blindfold test based on those principles.

Pete
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Soundboards again
« Reply #15 on: October 04, 2011, 01:33:50 AM »

Those who disagree with this view, feel free to go and read the various books, papers and theses on the acoustics of musical instruments before drawing any conclusions -- also texts about experimentation, observer bias and how to remove it.

I am interested, do you know whether there are any books or articles specifically about box acoustics?

My current thoughts are that the important factors are reed, block orientation (i.e. flat or upright) and chamber dimensions. These define the sound.

Bellows cross section will make a difference to the playability of the instrument, as will keyboard, mechanisms, pallets, etc. These shouldn't affect the sound though, or at least not significantly.

The casing of the instrument will affect the sound coming out, both in terms of projection and tone. The pallet hole area will affect how the reed sounds, as will the reed set.

Vibration of the reed blocks is likely to be unpleasant, as is vibration of the fondo (I suspect). For both, they should be as stiff as possible. The amount of space of the fondo covered by blocks may also have an effect on the vibration of the board. Fondo thickness might have an effect in that the hole to the block would be deeper. Likely to be negligible.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Soundboards again
« Reply #16 on: October 04, 2011, 02:20:21 AM »

I'm willing to start working on some of this AFTER I get my first melodeon built. Reading this thread has gotten me to thinking about how to deal with some issues to make sure the testing is for one variable and one variable only.

Since so much has been said about palletboards, I'd like to propose the following setup for testing different types of palletboard:

1. Create a set of reedblocks with reeds that move from one test instrument to another. No you can't do side by side comparisons, but the reeds, set of the tongue, chamber proportions, reedblock material would all stay the same. Make recordings and compare the recordings.

2. Create an instrument case such that palletboards can be swapped out, the reedblocks added and then play the instrument. I've seen some designs where this is fairly easy - a matter of a hand full of screws that hold the palletboard in place.

3. The palletboards all need to be treated exactly the same - same size and location of pallet holes, same dimension/area of pallet hole, same size of hold down blocks, etc.

4 What types/composition of palletboard should be tested? I'm thinking solid wood (this could also be divided into hardwood and softwood, for instance), plywood (aircraft ply), aluminium. Are there any other types that should be tested?

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Soundboards again
« Reply #17 on: October 04, 2011, 07:15:29 AM »

On further consideration, if the object is to discover whether the soundboard makes a difference (rather than which is the "best" soundboard material) then only two soundboards may need to be tested.  The trick would be to chose the two most likely "extreme" possibilities, say aluminium and cheap plywood of the same dimensions (tricky, do you define that by weight, thickness or flexilbility?), and test those under lab conditions.  If there is a difference then case is probably proved (at least for these purposes), if there is no difference then more testing would be required to check the general hypothesis that the material makes no difference.

Of course one might want to repeat the experiment with two different thickness soundboards of the same material to see if that has an effect.

Steve
« Last Edit: October 04, 2011, 09:24:16 AM by oggiesnr »
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Soundboards again
« Reply #18 on: October 04, 2011, 08:22:19 AM »

 8)
P.S. Sorry if this comes over aggressively, but I see too many snake oil salesman to have any sympathy unless they can prove what they claim -- and music and musical instruments are more guilty of this than many other fields ;-)

I'm just glad that you're here to make the points in a far better way than I could   8)

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Soundboards again
« Reply #19 on: October 04, 2011, 08:54:06 AM »

This is 'at it's core' a materials science test and needs the sort of kit you'd find in a large engineering department .. with some sort of keen final year engineer to do the hard work  :|glug
Logged
  _       _    _      _ 
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal