Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Castagnari Casta  (Read 5735 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Castagnari Casta
« on: October 12, 2011, 12:34:56 PM »

I have an opportunity to purchase a Castagnari Casta.  Does anyone know when and why Castagnari stopped making these?  Somewhere in the back of my mind I remember speculation about "soundboard" cracking problems since it is made of solid wood.  Has anyone had one where this actually happened?

Michael
Logged

melodyman

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
  • Handry 12,Evo
Re: Castagnari Casta
« Reply #1 on: October 12, 2011, 01:22:51 PM »

Rees will be the one with the information
Logged
,Handry 12,Evo.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Castagnari Casta
« Reply #2 on: October 12, 2011, 02:59:54 PM »

................. as if by magic  ;D

I play a d/g Casta myself. It's a fabulous instrument. Light, fast and very responsive. I've never experienced or even heard of soundboards cracking.

Castagnari stopped making them 8 or 10 years ago. No idea why. They discontinued the Lillium too (another great box).
I've been dealing with them for 27 years and they continue to baffle me. Lovely people though.  (:)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari Casta
« Reply #3 on: October 12, 2011, 03:03:43 PM »

I posted some experience here about a bulging fondo/baseboard/table in a three voice Casta
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Castagnari Casta
« Reply #4 on: October 12, 2011, 03:37:01 PM »

Thanks gentlemen.  I did not even know they made a three voice model.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari Casta
« Reply #5 on: October 12, 2011, 03:41:10 PM »

Neither did I till one came along in need of help!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Castagnari Casta
« Reply #6 on: October 12, 2011, 06:09:16 PM »

Wow, a three voice Casta - that's a new one on me too. Perhaps the extra holes for the third voice weakened the fondo to warping point.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Castagnari Casta
« Reply #7 on: October 12, 2011, 06:51:20 PM »

Special order maybe?   I thought they usually gave comparable models with different voices different names.
Logged

tostean

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Castagnari Casta
« Reply #8 on: October 21, 2011, 11:38:02 PM »

A Casta-question: I've had a 3 voice Castagnari GC for 3-4 years without knowing excactly which model it is. Was sold under the name Hascy as far as I know from previous owner. A few days ago I noticed that inside the bellow is written with pencil "Casta", while in my other Castagnari (DG) the name 'Hascy' is stamped in precisely same place. I wonder which model the one with the pencil-writing is in fact, never seen one quite alike. Production year 2003 with a Hascy grill, new logo and no 'italian' ornamentes. A Sander has been proposed, but grill is different. Anybody knows this model? At least Casta-like :-)
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Castagnari Casta
« Reply #9 on: October 22, 2011, 12:07:56 AM »

A Casta-question: I've had a 3 voice Castagnari GC for 3-4 years without knowing excactly which model it is. Was sold under the name Hascy as far as I know from previous owner. A few days ago I noticed that inside the bellow is written with pencil "Casta", while in my other Castagnari (DG) the name 'Hascy' is stamped in precisely same place. I wonder which model the one with the pencil-writing is in fact, never seen one quite alike. Production year 2003 with a Hascy grill, new logo and no 'italian' ornamentes. A Sander has been proposed, but grill is different. Anybody knows this model? At least Casta-like :-)
Interesting....
Here's my reasoning:
1. It's a three voice instrument, presumably LMM from the presence of the RH end stop. Hence it is not a Casta (which are two voice) despite what is written inside the bellows frame.

2. That leaves it to be either a Hascy or a Sander.

3. The grille designs have always been a bit subject to variability, but Hascys have always been slightly more ornate with inlay strips on the sides and front of the ends, including around the face with the logo. The Sanders only had inlay around the grille. Sanders made in the last 2 or 3 years have cutouts in the front of the ends like this:
http://www.castagnari.com/index.php?strparam=&language=uk&sz=301&id=9
but prior to that they had plain ends.

4. Hascy reeds are tipo a mano; Sander reeds are normally super dural, although they can be TAM by special order.

5. I've attached a photo of an older Sander which I used to have. It had TAM reeds and the older-style logo. The grille of yours, although slightly different in design from my older Sander, is nevertheless Sander-like, being rather heavier in its fretwork; the Hascys' fretwork have always been a little more refined.

My gut feeling about yours is that it is a Sander. Perhaps Rees could offer his opinion.....


Edited to add: I've just seen what Theo has written about a 3-voice Casta.  :o  That throws some uncertainty into the mix.
Am I right in thinking that as well as a solid cedar soundfondoboard, another distinguishing feature of Castas is a sculpted, contoured interior to the reed block chambers to emulate a sort of casotto chamber (or am I imagining that?)
« Last Edit: October 22, 2011, 12:29:59 AM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari Casta
« Reply #10 on: October 22, 2011, 12:23:57 AM »

Three voice Castas do exist, I've see one.

The distinguishing features of a Casta as far as I can see are:

1 sold wood fondo, usually western red cedar
2 the panels of the treble and base case are thinned out on the inside.

Both of these are easily checked by looking inside.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Castagnari Casta
« Reply #11 on: October 22, 2011, 12:28:36 AM »

Theo:
Was the three-voice Casta you worked on MMM or LMM? And did it have a RH stop?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari Casta
« Reply #12 on: October 22, 2011, 12:47:26 AM »

LMM with a pull stop to take out the L.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Castagnari Casta
« Reply #13 on: October 22, 2011, 06:22:19 PM »

A Casta-question: I've had a 3 voice Castagnari GC for 3-4 years without knowing excactly which model it is. Was sold under the name Hascy as far as I know from previous owner. A few days ago I noticed that inside the bellow is written with pencil "Casta", while in my other Castagnari (DG) the name 'Hascy' is stamped in precisely same place. I wonder which model the one with the pencil-writing is in fact, never seen one quite alike. Production year 2003 with a Hascy grill, new logo and no 'italian' ornamentes. A Sander has been proposed, but grill is different. Anybody knows this model? At least Casta-like :-)
Interesting....
Here's my reasoning:
1. It's a three voice instrument, presumably LMM from the presence of the RH end stop. Hence it is not a Casta (which are two voice) despite what is written inside the bellows frame.

2. That leaves it to be either a Hascy or a Sander.

3. The grille designs have always been a bit subject to variability, but Hascys have always been slightly more ornate with inlay strips on the sides and front of the ends, including around the face with the logo. The Sanders only had inlay around the grille. Sanders made in the last 2 or 3 years have cutouts in the front of the ends like this:
http://www.castagnari.com/index.php?strparam=&language=uk&sz=301&id=9
but prior to that they had plain ends.

4. Hascy reeds are tipo a mano; Sander reeds are normally super dural, although they can be TAM by special order.

5. I've attached a photo of an older Sander which I used to have. It had TAM reeds and the older-style logo. The grille of yours, although slightly different in design from my older Sander, is nevertheless Sander-like, being rather heavier in its fretwork; the Hascys' fretwork have always been a little more refined.

My gut feeling about yours is that it is a Sander. Perhaps Rees could offer his opinion.....


Edited to add: I've just seen what Theo has written about a 3-voice Casta.  :o  That throws some uncertainty into the mix.
Am I right in thinking that as well as a solid cedar soundfondoboard, another distinguishing feature of Castas is a sculpted, contoured interior to the reed block chambers to emulate a sort of casotto chamber (or am I imagining that?)


Yes, Steve, it's definitely a Sander.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tostean

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Castagnari Casta
« Reply #14 on: October 22, 2011, 09:38:43 PM »

Theo wrote yesterday:
Quote
Three voice Castas do exist, I've see one.

The distinguishing features of a Casta as far as I can see are:

1 sold wood fondo, usually western red cedar
2 the panels of the treble and base case are thinned out on the inside.

Both of these are easily checked by looking inside.
 
 

Here's some photos from inside my box (and two Hascy grills too). In my box wood in the sidepanels of treble case is cut down from 5 mm to maybe 2,5 thick, except near the edges. In bass-side that's not done, panel is only 20 mm high. Voices are LMM Antonelli, but that can cover the whole spectre from dural up to AM I suppose. Until 2006 Antonelli/Armoniche didn't mark type of reeds on the reedblocks as they've done since, their website says. It's above my knowledge to judge type of reeds by just looking at them. Treble-sound in the box is rather nice, strong and mellow, in fact more suited for 'lyrical' playing than for dancefloors IMO. But time for tuning is near.

Thanks for your comments. But I'm still not completely convinced about the Sander-conclusion. Could it simply be a 'no name' where a bit of experimenting has been done combining elements and style from Hascy, Sander and maybe Casta? That would explain why I've never seen a box completely alike even if I'm collecting photos of brands and models.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Castagnari Casta
« Reply #15 on: October 23, 2011, 12:50:54 AM »

Well, although Rees has endorsed my earlier conclusion of it being a Sander, I'm now beginning to think I was wrong. From your latest photos, and based on what Theo has said, the hollowing out of the interior casework sides and the presence of what looks like a cedar soundfondoboard would seem to indicate a Casta rather than a Sander.

So perhaps here is indeed an example of a rare three-voice Casta.

As far as I know, Super Dural reeds can be identified by the cylindrical non-hammered spigot of the rivet end, whereas TAM and AM reeds will show a series of about 5 flat hammer marks on the rivet end.

Ultimately, if it plays well and sounds good, that's all that matters.



Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Castagnari Casta
« Reply #16 on: October 23, 2011, 05:08:33 PM »

After seeing those photos, I've changed my mind too. It's a bit of a hybrid.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tostean

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Castagnari Casta
« Reply #17 on: October 27, 2011, 09:46:43 PM »

I've been absent a couple of days, thanks for comments in the meantime.

Steve: I've looked once again inside this mysterious box, and I see "about 5 flat hammer marks on the rivet end" as you've mentioned.

Seems I end up with the conclusion that this GC-box is a kind of hybrid as Rees calls it. At first sight looks close to a Sander of that period but with Hascy grill and apparantly TAM or AM reeds. Pencil-named Casta inside and most important equipped as a Casta conc. the sound-output, as far as I've understood. A pre-Casta I might call it next time somebody asks :-)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari Casta
« Reply #18 on: October 27, 2011, 10:46:07 PM »

Why not call it a Casta?

It has the two features that I think are unique to that model - hollowed out side panels, and solid cedar fondos. It also has the type of reeds you would find in a Casta,  and it also has Casta written on the bellows! 

If it walks like a duck and it quacks like a duck... (complete this well know phrase or saying and win points!!!)
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Castagnari Casta
« Reply #19 on: October 28, 2011, 12:00:33 AM »

[qu ;)ote author=Theo link=topic=8064.msg101489#msg101489 date=1319751967]
Why not call it a Casta?

It has the two features that I think are unique to that model - hollowed out side panels, and solid cedar fondos. It also has the type of reeds you would find in a Casta,  and it also has Casta written on the bellows!  

If it walks like a duck and it quacks like a duck... (complete this well know phrase or saying and win points!!!)
[/quote]

You know what Emmanuel does to ducks! (and I don't mean the confit du canard).  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal