Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows making question  (Read 2619 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Bellows making question
« on: October 21, 2011, 11:41:33 PM »

I'm planning to make bellows for my mini-melodeon project. I've finished the folding of the card stock and will probably cut the pieces this weekend.

What type of material do I use to attach the corners together? Paper, cloth, ?? and what weight of paper or cloth?

I've purchased the leather diamonds from Charlie at CGM. After that comes the paper and tape, all easy to find.

Thanks,

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Emi nabius

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Bellows making question
« Reply #1 on: February 23, 2020, 07:58:07 PM »

Hi, did you figure it out? I'm with the same problem here! If you could help me i would be very grateful! Thank you (:)
Logged

Emi nabius

  • Member
  • *
  • Offline Offline
  • Posts: 12
Making bellows
« Reply #2 on: February 23, 2020, 08:04:05 PM »


Hi, i'm making some bellows and I'm trying to attach the corners together. I tried with paper but it brokes when pulling (just testing) and i cant use it in my bellows. So this is my question:
What type of material do I use to attach the corners together? Paper, cloth, ?? and what weight of paper or cloth?
Thank you all
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Making bellows
« Reply #3 on: February 23, 2020, 09:39:19 PM »

I'll try and answer your question even if I'm not quite sure whether I fully understand it...  You have to pull the 4 sides out to a reasonable length and attach the outermost folds to a specially designed frame. Only then does it make sense to connect the corners. I use small pieces of masking tape. Hope this helps...

















« Last Edit: February 23, 2020, 09:44:03 PM by diatonix »
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Making bellows
« Reply #4 on: February 23, 2020, 10:32:42 PM »

Kinda like this guy’s doing ??  He’s revamping them here but some of the process may apply.
I’m not sure if it is approved materials, but should give you some idea of process.
I only watched the first two videos, but I guess you would use the real frame or make a template of the size needed, attach the paper card to it ( how?) then you can expand it as needed to fill corners, etc.

https://www.youtube.com/watch?v=F4Ogyho0xow&list=PLJQT3kKkuqDHdxB4Y4Xmu8QkQiEotwAzR&index=1
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Scotty Gring

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Try putting a piano in a gig bag.
Re: Making bellows
« Reply #5 on: February 24, 2020, 02:40:31 AM »

Kinda like this guy’s doing ??  He’s revamping them here but some of the process may apply.
I’m not sure if it is approved materials, but should give you some idea of process.
I only watched the first two videos, but I guess you would use the real frame or make a template of the size needed, attach the paper card to it ( how?) then you can expand it as needed to fill corners, etc.

https://www.youtube.com/watch?v=F4Ogyho0xow&list=PLJQT3kKkuqDHdxB4Y4Xmu8QkQiEotwAzR&index=1

I've been watching this series from Anatoly while I rebuild a set of bellows from a very old pre-pokerwork.  Fortunately the videos are numbered so you can find the next in the series as you follow through.  Also he answers questions in English so feel free to reach out to him.  I've been lucky to have him respond usually within a few hours of posting.  So far I've learned (through trial and error after watching) I cut my fabric pieces too big (added too much bulk when I got to adding my metal corners) and I used paper to recover the bellows rather than fabric - and the paper became very soft after being glued, further complicating the corners.  He probably addresses these things as he narrates in Russian but I'll know better next time.
Logged
Proving each day that, just like golf, merely possessing the equipment
in no way guarantees you have any idea what the hell you're doing.      ¯\_(ツ)_/¯

Hohner 1040C, 2815G/C (pre-Pokerwork), Hohner A/D 21/12 Italienne. Titano Titan Piano Accordion (with apologies).

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Making bellows
« Reply #6 on: February 24, 2020, 03:14:46 AM »

Quote
attach the paper card to it ( how?)

The one time I made bellows I used this type of paper clip to hold the cardboard to thinnish plywood frames.  Worked for me...
Logged

Emi nabius

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Making bellows
« Reply #7 on: February 24, 2020, 07:14:58 AM »

Thank you for the videos, very helpful, i was learning with another two videos that were so fast in some steps... So i understand that the best is using fabric (cotton, i guess, but i dont know if i'm right so please correct me) for the corners and even for recovering the whole bellows? I thank i was going to use paper but i'm not sure now since i have never tried. So, what ki d of fabric do you think is the best?
Thank you all and sorry for my english..  :|||: :|||: :|||:
Logged

fc diato

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 146
Re: Making bellows
« Reply #8 on: February 24, 2020, 01:42:11 PM »

What he says is (rough translation):  cotton, but not too thin or it will be completely transparent.

Logged
fc diato

Scotty Gring

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Try putting a piano in a gig bag.
Re: Making bellows
« Reply #9 on: February 24, 2020, 01:47:26 PM »

Not IN the corners.  That should be a thin leather/suede/chamois type material.  I buy these in sets of 20 from a company with an ebay store https://www.ebay.com/usr/bossettoaccordions?_trksid=p2057872.m2749.l2754  but they also have a stand-alone website - http://www.bossettoaccordions.com/  They have the corner  diamonds precut in different sizes and I've yet to find them at a price like this (in the US, anyway - and I think Charlie Marshall has them for a bit more). The material Anatoly us using in the videos I watched look like a thin linen material so I cut up from an old cotton dress shirt - I just made my pieces too big.  Less apparently is more in this application. 
Logged
Proving each day that, just like golf, merely possessing the equipment
in no way guarantees you have any idea what the hell you're doing.      ¯\_(ツ)_/¯

Hohner 1040C, 2815G/C (pre-Pokerwork), Hohner A/D 21/12 Italienne. Titano Titan Piano Accordion (with apologies).

Scotty Gring

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Try putting a piano in a gig bag.
Re: Making bellows
« Reply #10 on: February 24, 2020, 01:51:02 PM »

Quote
attach the paper card to it ( how?)

The one time I made bellows I used this type of paper clip to hold the cardboard to thinnish plywood frames.  Worked for me...

I used these as I re-taped, alternating every other row with 3 to 5 clips per fold.  Ran out of clips and then came back to the rows I skipped stealing clips from the ones that had the longest time to dry.  Thing looked like an underwater mine with all those clips on it.
Logged
Proving each day that, just like golf, merely possessing the equipment
in no way guarantees you have any idea what the hell you're doing.      ¯\_(ツ)_/¯

Hohner 1040C, 2815G/C (pre-Pokerwork), Hohner A/D 21/12 Italienne. Titano Titan Piano Accordion (with apologies).

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Making bellows
« Reply #11 on: February 24, 2020, 02:03:51 PM »

There is no reason to connect the corners with those relatively large pieces of cotton. Once the leather gussets are in place they have no longer any function at all and together with the extra glue they only make these corners unnecessarily thick. Small pieces of good quality masking tape will do the trick. Needless to say, it's also a lot faster.
« Last Edit: February 24, 2020, 02:14:23 PM by diatonix »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows making question
« Reply #12 on: February 24, 2020, 02:15:09 PM »

[[ADMIN]]

Topics merged.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal