Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: What to offer for a Walters?  (Read 5230 times)

0 Members and 1 Guest are viewing this topic.

The Idle Rich

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
What to offer for a Walters?
« on: October 27, 2011, 07:13:13 PM »

I know of a Walters for sale best offer. I can only afford $700 US right now. I Hope to hear from seller about my offer. Have not seen it yet. It is about an hours drive from where I live. Here is a photo if anyone cares to comment on this beauty. The Idle Rich





« Last Edit: October 27, 2011, 07:28:11 PM by The Idle Rich »
Logged

The Idle Rich

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: What to offer for a Walters?
« Reply #1 on: October 27, 2011, 08:55:53 PM »

Seller said yes! I will let you know how it turns out. I hope it is a semitone box. I might think D-C#?
« Last Edit: October 27, 2011, 08:58:24 PM by The Idle Rich »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: What to offer for a Walters?
« Reply #2 on: October 27, 2011, 09:47:12 PM »

Hi Rich,

My bet is it's a D/C# 4 voice box, maybe 3 voice.  These are good workhorse players for the D/C# style and the outside row usually has a very good sound.  Congratulations!  Hope you find it's in good shape.

PG
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: What to offer for a Walters?
« Reply #3 on: October 28, 2011, 10:13:53 AM »

Very pleased for you Rich I have the O'Byrne de Witt version (without the smaller button size on the inside row) its a great box DC# I know they get turned around C#D but I haven't the heart, so I've been putting in some work on the fingering its just so powerfull on the D row on the out side which is what makes it, if I switch them round it would be very nice but more Paolo Soprani than Baldoni ! I love it !  not so bad after all that with the non existent Black box  (:) All the Best mory
« Last Edit: October 28, 2011, 10:16:25 AM by mory »
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: What to offer for a Walters?
« Reply #4 on: October 28, 2011, 10:59:58 PM »

I've seen a few of those, and even had a very similar Baldoni (from O'Byrne DeWitt). Very nice machines - great size, and with the right tweaking, you'll get one heck of a box. Not a polite box, a friend of mine called it "the one-man-ceili-band-box", as it drowned out all other instruments in its path.

Congrats!
Logged

The Idle Rich

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: What to offer for a Walters?
« Reply #5 on: November 01, 2011, 06:06:43 PM »

I picked up the Walters today. The reed plates are popping out of the wax but other than that the box is in great shape. It is four reed D/C#. No rust  at all on the reeds and the leathers feel soft and might not need replacing? One piece of the chrome grill strips needs a repair and the black piano style sharp air lever is missing a small chunk of surface plastic(bakelite?) near the pivot point but seems to work well. It has the original case and FH Walters business card inside. I wish I could play a tune on it right away but will have to wait a little longer. I found it from an ad on craigslist. I am thrilled to finally have it. The Idle Rich

« Last Edit: November 01, 2011, 07:38:04 PM by The Idle Rich »
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: What to offer for a Walters?
« Reply #6 on: November 01, 2011, 07:46:37 PM »

I picked up the Walters today. The reed plates are popping out of the wax but other than that the box is in great shape. It is four reed D/C#. No rust  at all on the reeds and the leathers feel soft and might not need replacing? One piece of the chrome grill strips needs a repair and the black piano style sharp air lever is missing a small chunk of surface plastic(bakelite?) near the pivot point but seems to work well. It has the original case and FH Walters business card inside. I wish I could play a tune on it right away but will have to wait a little longer. I found it from an ad on craigslist. I am thrilled to finally have it. The Idle Rich



Lovely. I'm quite jealous.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: What to offer for a Walters?
« Reply #7 on: November 02, 2011, 01:03:11 AM »

Hi Rich,

Congratulations again!  

How are the voices of this one set up?  (Most likely either LMMM or LLMM for a D/C# 4 voice Walters of this period).

I think Ted McGraw would love to have the info on this box, especially a good photo or scan of the F. H. Walters business card for his research.

Welcome to the D/C# community!

PG
« Last Edit: November 02, 2011, 01:06:50 AM by pgroff »
Logged

The Idle Rich

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: What to offer for a Walters?
« Reply #8 on: November 02, 2011, 01:45:17 PM »

Hi Paul,

I opened the Walters up again and can see that it is LLMM. I will replace the leathers when I get it rewaxed since they are so old but look healthy. The reed plates are very light and wondered if they are zinc? I was lucky to see the craigslist ad early and the seller accepted my offer and was willing to remove the ad (on my request) and give me a few days to put my finances together.  The F.H. Walters business card is glued inside the lid of  the case but I will try to get a decent photo of it. Apparently the seller bought it at an estate sale recently. I never expected to find a Walters on craigslist but since I live in New York state where the box was manufactured and live near the Irish alps (Catskills) where the box was located maybe I shouldn't be surprised. Rich

« Last Edit: November 02, 2011, 01:54:01 PM by The Idle Rich »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: What to offer for a Walters?
« Reply #9 on: November 02, 2011, 02:30:50 PM »

Hi Rich,

I know Ted would appreciate the photos and info -- so would I and others, probably.

I'm pretty sure this accordion was made in Italy in the late 1940s or early 1950s, rather than NY as you suggest --  but imported to be sold by Walters' shop.  I think Stephen Chambers has been studying these and maybe he will offer his insights at some point.  I would be surprised if the reedplates are zinc from this period, but if so that would be interesting.   Zinc reed plates are heavier in weight than aluminum plates and usually a medium to dark gray in color.  Years ago I did get a big wooden box of reeds from Tosi Music in Boston that supposedly had been acquired from Walters when his shop was closed down, and some of those reeds were old zinc plate ones.

If you do get out the camera, it would also be interesting to document the action (removing the grille and the keyboard plate).  I've seen Walters, Baldoni-Bartolis, O'Byrne DeWitt Baldonis, and Italian-American Acc Co boxes of this general body type with a variety of different types of action installed.

Great find!  Sure you don't want to trade it for a B/C?  ;-)

PG
« Last Edit: November 02, 2011, 02:34:30 PM by pgroff »
Logged

The Idle Rich

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: What to offer for a Walters?
« Reply #10 on: November 02, 2011, 03:14:03 PM »

Hi Paul,

The plates must be aluminum as they are super light. I only said zinc because I thought most plates are either brass or zinc? My limited knowledge of accordions workings also lead me into thinking that the accordion might have been made in N.Y.. I sort of knew that it could have been imported but forgot that when I posted.

I was thinking it was LMMM until I looked  inside a second time. I'll bet with two sets of low reeds in it, it will be a real flamethrower when put back together!

Rich
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: What to offer for a Walters?
« Reply #11 on: November 02, 2011, 04:37:58 PM »

Hi Rich, look forward to hearing it when its done, but not as much as you I'll bet. There has been a fair bit on Baldonis on here Walters New York O'Byrne de Witt Boston with an amount of conjecture around production. Imported? imported parts US assembled etc there's some good reading and Lars has some amazing photos of all sorts of one row, 2 row, mixed button sizes, square button, highley decorated, 1half row etc well worth a look Glad you got it no prob's All the Best mory
Logged

MadDogMurdock

  • Good talker
  • **
  • Offline Offline
  • Posts: 80
Re: What to offer for a Walters?
« Reply #12 on: November 02, 2011, 05:09:47 PM »

Hi Rich,
I'm pleased you're making the effort to get this beauty up and running.  I look forward to hearing it.   I'm in the process of refurbishing my great grandfathers 6 voice 1.5 row Baldoni-Bartoli and will get some photos up at some point.  I'm also from the Catskills, but living in Philadelphia for the time being.  Perhaps one day we'll get a chance to compare these boxes. 
-Ben
Logged

The Idle Rich

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: What to offer for a Walters?
« Reply #13 on: November 04, 2011, 06:51:25 PM »

An inside view.

« Last Edit: November 04, 2011, 07:17:35 PM by The Idle Rich »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: What to offer for a Walters?
« Reply #14 on: November 04, 2011, 11:32:36 PM »

Nice!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal