Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Making plastic buttons  (Read 5053 times)

0 Members and 1 Guest are viewing this topic.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Making plastic buttons
« on: October 29, 2011, 03:53:42 PM »

Has anyone ever tried making their own plastic buttons? 

Inventor

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 117
Re: Making plastic buttons
« Reply #1 on: October 30, 2011, 03:33:39 PM »

In an early experiment (around 1960) on changing a small 48 bass piano-accordion to a melodeon I made a button keyboard from scratch using 1/8" square silver steel rods.  I made the buttons on a metal working lathe from lignum-vitae which I had left over from my attempts to make Northumberland Small-pipes.  This didn't present any problems; I wouldn't think doing the same using plastic would present any problems either.  Imitation ivory and horn are easily obtainable, (Axminster Power Tools lists these and other more exotic acrylics in their tool catalogue). However why bother when plastic buttons ready made are available?  I wish I could have obtained all the bits and pieces that are available nowadays 50 years ago!
Inventor.

P.S. Sorry about the bad spelling - I just tryed the Spell Check and whilst I can just about accept that it might not like a piano-accordion, to suggest Melodeon should be changed to Melton is unforgiveable! Does it think this web site is about pie making?
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Making plastic buttons
« Reply #2 on: October 30, 2011, 04:00:49 PM »

My thought on the buttons was to cast my own.  They've come a long way with plastics and I know there is some do it yourself stuff, just don't know where to start.  Google searches leave me even more confused.  It'd must be nice to not be limited by existing sizes/colors. 

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Making plastic buttons
« Reply #3 on: October 30, 2011, 06:41:42 PM »

This looks like a useful starting point for information http://www.resin-supplies.co.uk/casting%20resin%20detailed.htm.

With memories of resin kits in my youth I don't think that I'd bother again, life's too short  (:)

Steve
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Making plastic buttons
« Reply #4 on: October 30, 2011, 07:05:35 PM »

Surely it would be easier to turn them rather than casting? Get a plastic rod and turn them from that.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Making plastic buttons
« Reply #5 on: October 30, 2011, 07:59:32 PM »

first go out and buy a lathe !!
 then pay for lessons in the use thereof!!
then  buy something to turn buttons out of!!

perhaps simpler & cheaper to buy buttons from someone like Charly Marchall

george >:E
 
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Making plastic buttons
« Reply #6 on: October 30, 2011, 08:48:23 PM »

What's all this talk about "easy", I thought making accordions was supposed to be hard. ;D

Buying available buttons is pretty limiting, and though I haven't checked, I assume plastic rod probably is too (?).

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Making plastic buttons
« Reply #7 on: October 30, 2011, 09:24:32 PM »

What's all this talk about "easy", I thought making accordions was supposed to be hard. ;D

Buying available buttons is pretty limiting, and though I haven't checked, I assume plastic rod probably is too (?).


Nope, I know jewelers who use it (and a couple of turners who make lace bobbins) and it's available in almost any colour (or shade) you might desire.

I know I tend to look at things with my business hat on (making stuff is what I do for a living) but I ask myself how much value the buttons would actually add to an instrument.  IMHO you'd be better off making stunning cases and using a good quality off the shelf button..

Steve
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Making plastic buttons
« Reply #8 on: October 30, 2011, 09:32:06 PM »

 
[/quote]

I know I tend to look at things with my business hat on (making stuff is what I do for a living) but I ask myself how much value the buttons would actually add to an instrument.  IMHO you'd be better off making stunning cases and using a good quality off the shelf button..

Steve
[/quote]

Steve, I'm quite adept at not letting common sense and reason get in my way. If I ever start looking at things from strictly a fiscal sense, there's a few other things I'd have to stop doing.  :|glug

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making plastic buttons
« Reply #9 on: October 30, 2011, 10:15:44 PM »

The preferred plastic material among concertina makers seems to be Delrin, a variety of Acetal.   It is available in a variety of diameters, and the properties which seem to make it suitable include its strength, machineability, and ability to take a high polish.

If you have a lathe you would probably want to invest some time in making some simple tooling and then you would be able to turn out buttons fairly quickly, but still likely at a higher unit cost than you can buy ready made)
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Making plastic buttons
« Reply #10 on: October 30, 2011, 10:28:34 PM »

Theo, any problems you know of glueing delrin? I've seen it before, but just in black or white.

No doubt there would be no money savings in making my own buttons.  None in turning my own stops either, but just one of those things I do anyway.

The reason I was thinking of casting buttons is there would be no limit to color, or even color combinations. There's a bit on the web for cast your own plastics, but there is a mind numbing array of different kinds of plastics.  I was hoping someone here had some knowledge in that department before I started experimenting.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making plastic buttons
« Reply #11 on: October 30, 2011, 10:31:54 PM »

Plenty of coloured buttons available from Carini
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making plastic buttons
« Reply #12 on: October 30, 2011, 10:34:31 PM »

Or perhaps you could use Fimo  then you could make every button a miniature picture!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Making plastic buttons
« Reply #13 on: October 30, 2011, 11:36:08 PM »

The mind boggles!  :o It's only a small step from there to using the seaside rock plan and casting your name in every button ... .. ..   :Ph  :|glug
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Making plastic buttons
« Reply #14 on: October 30, 2011, 11:53:55 PM »

Hi Bryan and all,

I've heard that Ron Barnes has been making cast banjo tuner buttons, including custom ornamented ones, for example see the discussion here:

http://www.banjohangout.org/archive/188335

http://www.banjohangout.org/topic/218285/2/#2767821

PG
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Making plastic buttons
« Reply #15 on: October 31, 2011, 02:35:03 AM »

That's pretty impressive, pgroff. 

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Making plastic buttons
« Reply #16 on: November 01, 2011, 03:52:23 PM »

Or perhaps you could use Fimo  then you could make every button a miniature picture!

Have you been doing a lot of gluing, Theo?   ;D

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making plastic buttons
« Reply #17 on: November 01, 2011, 03:53:47 PM »

No, just exercising my inate imagination. ;D ;D
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rmenhinick

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Making plastic buttons
« Reply #18 on: November 01, 2011, 05:17:31 PM »

The mind boggles!  :o It's only a small step from there to using the seaside rock plan and casting your name in every button ... .. ..   :Ph  :|glug

a sort of Castingmyway      (or a Castingnasti)   ;D
Logged
Old G Poker, New DG Poker, ADG Compadre, DG Sandpiper, CF Erica, GC Delicia Popular, DG Dino Baffetti Black Pearl 3, Casali Verona 48 bass PA, (Squeezebox Squirrel :D)

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Making plastic buttons
« Reply #19 on: November 01, 2011, 05:57:07 PM »

Have you ever considered using mother of pearl?
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal